Earticle

초록

영어

Screen printing is a stencil process whereby ink is transferred to the substrate through a stencil supported by a fine fabric mesh. Therefore screen had a tendency to distort and swell, as ink was deposited between the fibers, and were difficult to clean. The tow importance of stencil parameters that affect print quality are stencil thread diameter and the fabric thickness because of their influence on both ink deposit and print definition. Since screen printing inks can be formulated to adhere to almost any surface, and the printing process itself can be handled almost any substrate in a wide variety of shape, screen printing is a very versatile process. The small size pronting is reproduced image used screen printing because the surface of substrates is not suited at screen printing method. In screen printing, the need of high definition printing is gradually increasing according to developing special inks. A conventional haftone, so called AM screening, is simple and easy to implement, but the haftone dot patterns by using this method are not free for the moire fringe. This paper is used densitometry and image analysis to investigate relation with printing according to screen mesh, opening size and resolution of copy in image reproduction used FM screen. We had the good result of dot gain and tone reproduction on the screen printing of high definition using FM screen.

목차

Abstract
 1. 서론
 2. 실험
  2-1. 원고의 제작
  2-2. 견장 및 제판
  2-3. 인쇄 및 측정
 3. 결과 및 고찰
  3-1. dpi 변화에 따른 망점 재현
  3-2. PNDither 1.0과 PNDither 1.1의 망점 재현
  3-3. Mesh count 변화에 의한 망점 재현
  3-4. 망점 크기와 moire의 관찰
 4. 결론
 참고문헌

저자

• 김기호 [ Gi-Ho Kim | 세진 공업(주) ]
• 조가람 [ Ga-Ram Cho | 부경대학교 대학원 인쇄공학과 ]
• 구철회 [ Chul-Whoi Koo | 부경대학교 공과대학 화상정보공학부 ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  한국인쇄학회지 [JOURNAL OF THE KOREAN GRAPHIC ARTS COMMUNICATION SOCIETY]

• 간기

  연간

• pISSN

  1226-1149

• 수록기간

  1983~2025

• 십진분류

  KDC 586 DDC 686