Earticle

현재 위치 Home

사찰 주불전의 처마부 치수 결정과정에 관한 연구
A Study on the Decision Process of Dimension in Eaves Part on Main Buddhist Halls

첫 페이지 보기
  • 발행기관
    대한건축학회지회연합회 바로가기
  • 간행물
    대한건축학회연합논문집 KCI 등재 바로가기
  • 통권
    제12권 제2호 통권 42호 (2010.06)바로가기
  • 페이지
    pp.45-52
  • 저자
    성대철, 박강철
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A121686

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
Eaves in traditional Korean architecture plays the functional and symbolic roles in creating the appearance of building.
Therefore, the length and angle of the eaves vary depending on the scales, characters and structures of building and it is considered that several factors may have influence on deciding the value of eaves.
However, objectified construction-rule or laws on the eaves have passed the study on a simple correlation or structure rather than design of empirical research had been mainstreamed at the time.
In this study approached the architectural design for estimating the dimensions in eaves on main Buddist halls, and examined the process that clarify determination of dimensions in eaves, using statistical analysis based on the measured data.
As for this conclusion : Firstly, the dimension of eaves part is closely related to sectional element. Also estimation of dimension model can be set by based on this.
Secondly, the ratio of Jang-yeun's('왊) and Bu-yeun's(왊) protrusion length 0.78:0.22 was most prequently and common.
Finally, dimensions of the eaves part are decided in sequence by side length of the building - to the ends of the eaves from the center of side length of the building - the framework of whole outline, the height of the entire structure. And the detail dimensions like height of column or Gong-po(.) can be flexibly adjusted.

목차

Abstract
 1. 서론
  1.1 연구배경 및 목적
  1.2 연구 대상 및 방법
 2. 기존 연구의 고찰
  2.1 기존 연구의 경향
  2.2 용어의 정의
 3. 대상 불전의 일반적 고찰
  3.1 대상 불전의 일반적 특징
  3.2. 대상 불전의 처마부 특징
 4. 요소의 분석
  4.1 상관분석
  4.2 변수의 회귀분석
 5. 결론
 참고문헌

키워드

주불전 치수 결정 과정 처마고 처마각 처마내밀기 Main Buddhist Halls Decision process of Dimesions Eaves Height Eaves Angle Eaves protrusion

저자

  • 성대철 [ Sung, Dae-Chul | 조선대학교 대학원 박사수료 ]
  • 박강철 [ Park, Gang-Chul | 조선대학교 건축학부 교수 ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    대한건축학회지회연합회 [The Regional Association of Architectural Institute of Korea]
  • 설립연도
    2000
  • 분야
    공학>건축공학
  • 소개
    본회는 건축에 관한 학술․ 예술․ 기술을 연구 연마하는 지회회원들의 입지향상과 회원상호간의 친목도모와 함께 건축 문화창달에 기여함을 목적으로 한다. 목적을 달성하기 위하여 다음의 사업을 한다. 1. 지회회원의 입지향상과 친목도모 2. 건축에 관한 조사․연구지도 및 이에 관련된 사업 3. 회지, 논문집, 연구보고서 기타 건축에 관한 도서의 간행 4. 건축에 관한 강습회․강연회․간담회․전람회․견학회 등의 개최 5. 건축에 관한 계획, 감독, 기술검토에 대한 국가공공기관 기타의뢰에 관한 사항 6. 국내외 관계 제 학회와의 교류 및 회의참석 7. 기타 본회 목적달성에 필요한 사업

간행물

  • 간행물명
    대한건축학회연합논문집 [Journal of the Regional Association of Architectural Institute of Korea]
  • 간기
    격월간
  • pISSN
    1229-5752
  • 수록기간
    1999~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 540 DDC 690

이 권호 내 다른 논문 / 대한건축학회연합논문집 제12권 제2호 통권 42호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장