Earticle

초록

영어

In the acoustic construction of the cinema theater that need both of the definition and the clarity, the acoustic engineers require the accurate estimation method of acoustic design for the proper acoustic performance. Nowaday, the some companies developed the computational simulators for the acoustic design that RAY NOISE, ODEON, CATT, EASE. In these simulator, the RAY NOISE R3.1 were useful program because it had 3D function and the interfaces. The aim of this research is the contribution for accuracy estimation work in the acoustic design through it investigate the errors between measured factors and estimations in the case of acoustic design and construction for the projection rooms, it used by RAY NOISE version 3.1. In the result of investigation, the measured factors in the A room(V 1,200㎥) were that Reverberation Time(RT₆₀) is 0.48±0.02sec, Definition(D₅₀) is 82.5%, Clarity(C₈₀) is 8±1dB, but the simulated factors were that RT₆₀ is 0.60±0.05sec, D₅₀ is 77.5±2.5%, C₈₀ is 5±2dB. The measured factors in the B room(V 300㎥) were that RT₆₀ is 0.36±0.01sec, D₅₀ is 94.7%, C₈₀ is 10±1dB, but the simulated factors were that RT₆₀ is 0.48±0.02sec, D₅₀ is 87.5±2.5%, C₈₀ is 6±2dB. The cause of the difference measuring and simulation were that the different between the input parameters and the real acoustic test parameters in the room. In conclusion, the computational simulator as RAY NOISE R3.1 occur the error of factors that RT₆₀ is +0.12sec, D₅₀ is -7.2 ~ -5.0%, C₈₀ is -4 ~ -3dB in the case of this research. Hereafter, the engineering field require the research which the change of in put parameter and the change of out put.

목차

Abstract
 1. 서 론
  1.1 연구배경 및 목적
  1.2 연구 방법 및 범위
 2. 음향요소 이론고찰
  2.1 관련연구 동향
  2.2 음향성능 평가요소
  2.3 음향 시뮬레이션의 개요
 3. 음향요소 시뮬레이션
  3.1 음향요소 시뮬레이션 및 측정 대상의 개요
  3.2. 주파수별 잔향시간 시뮬레이션 결과
  3.3 음향요소별 3차원 시뮬레이션 결과
 4. 음향요소 측정 및 비교 분석
  4.1 측정 방법
  4.2 측정결과
  4.3 시뮬레이션 값과 측정값 비교
 5. 결 론
 참고문헌

키워드

음향설계 영화관 시사실 잔향시간 회화명료도 음악명료도 Acoustic design Cinema theater Projection room Reverberation time Definition Clarity

저자

• 김태훈 [ Kim, Tae-Hoon | 티엘엔지니어링(주) 대표이사, 공학석사 ]
• 공정철 [ Kong, Jeong-Cheol | 부경대학교 대학원, 박사과정 ]
• 조은경 [ Cho, Eun-Kyoung | 부경대학교 대학원, 석사과정 ]
• 정근주 [ Jung, Gun-Joo | 부경대학교 건축학부 조교수, 공학박사 ]
• 임영빈 [ Im, Young-Bin | 부경대학교 건축학부 교수, 공학박사 ] 교신저자

참고문헌

발행기관

간행물