The purpose of this study is to estimate axial force in shoring during construction of RC buildings using finite element analysis and to propose a simple method to estimate maximum force in reshoring. Cost for formwork takes substantial portion of concrete works in RC building construction. Efficient arrangement of shoring and reshoring leads to cost saving and safety of building. As the time dependent characteristics of concrete material, load transfer between slab and shoring mainly depends on concrete strength. slab thickness, construction period, number of shoring and reshoring. In this study, to figure out the effect of these parameters various conditions are simulated with simplified slab boundary conditions. Based on analysis result statistical program was used to propose an equation to estimate maximum force in shorings. To verify the applicability of the proposed equation three floor plans of constructed RC apartment buildings are analysed and compared with the calculation from proposed equation, showing very favorable result within engineering accuracy.
목차
Abstract 1. 서론 1.1. 연구배경 및 목적 2. 해석모델 개요 및 콘크리트 물성 3. 지주와 슬래브간의 축력전달 3.1. 슬래브의 타설공기 3.2. 슬래브의 콘크리트 강도 3.3. 지지바닥 슬래브의 강성 4. 지주의 최대축력 예측 5. 결론 참고문헌
키워드
지주콘크리트공사벽식구조건물지주-슬래브 상호작용추정식Shoningconcrete WorksWall-Type BuildingShore-Stab InterationEquation for estimation
저자
김이성 [ Kim, Ie-Sung | 경북대 건축․토목공학부 연구교수, 공학박사 ]
김영찬 [ Kim, Young-Chan | 부경대학교 건축학부 교수, 공학박사 ]
교신저자
대한건축학회지회연합회 [The Regional Association of Architectural Institute of Korea]
설립연도
2000
분야
공학>건축공학
소개
본회는 건축에 관한 학술․ 예술․ 기술을 연구 연마하는 지회회원들의 입지향상과 회원상호간의 친목도모와 함께 건축 문화창달에 기여함을 목적으로 한다.
목적을 달성하기 위하여 다음의 사업을 한다.
1. 지회회원의 입지향상과 친목도모
2. 건축에 관한 조사․연구지도 및 이에 관련된 사업
3. 회지, 논문집, 연구보고서 기타 건축에 관한 도서의 간행
4. 건축에 관한 강습회․강연회․간담회․전람회․견학회 등의 개최
5. 건축에 관한 계획, 감독, 기술검토에 대한 국가공공기관 기타의뢰에 관한 사항
6. 국내외 관계 제 학회와의 교류 및 회의참석
7. 기타 본회 목적달성에 필요한 사업
간행물
간행물명
대한건축학회연합논문집 [Journal of the Regional Association of Architectural Institute of Korea]