Earticle

현재 위치 Home

SPC기둥-RC보 강축방향 접합부에서 H형강 브라켓 부착형에 대한 구조성능 평가
Evaluation of Structural Capacity on H-Bracket type at Strong Axis Joint of SRC Column-RC Beam

첫 페이지 보기
  • 발행기관
    대한건축학회지회연합회 바로가기
  • 간행물
    대한건축학회연합논문집 KCI 등재 바로가기
  • 통권
    제11권 제2호 통권 38호 (2009.06)바로가기
  • 페이지
    pp.195-202
  • 저자
    이강민, 임재형, 문정호, 오경환, 김성호
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A111125

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
The objective of this research is to provide better knowledge on the structural behavior of strong axis H beam bracket type SRC column-RC beam joint, supported by experimental results, that can be broadly applicable to many structures with similar characteristics. For this purpose, literature reviews and field survey were performed to classify the most commonly used for this type of joints. Then, experimental program was designed and performed with 5 SRC column-RC beam joint specimens designed with long and short bracket type details. Using the experimental results obtained from the testing of these specimens, structural performances of the joints such as the hysteretic curves, the maximum strength capacities, the strains of reinforced bars were investigated. From the test results, reinforced bracket type specimens revealed to have the strengths close enough to the nominal strengths. The un-reinforced long bracket type specimen showed brittle fracture resulting in lower strength capacity due to the shear ruptures near the hinges at the end of the beams. Regardless of the reinforcement at the end of the beam, short bracket type specimens revealed to possess the strength capacities close to the nominal strengths, however, reinforced specimen showed more ductile behavior after maximum strength capacity reached.

목차

Abstract
 1. 서론
 2. 국내 현장 및 기존 연구자료의 고찰
 3. 실험
  3.1. 실험체 계획
  3.2. 실험체 설계
  3.3. 측정 및 가력계획
  3.4. 실험체 설치
  3.5. 재료시험 결과
 4. 실험결과의 분석
  4.1. 하중-변위 곡선 및 파괴양상
  4.2. 실험체의 변형율 비교
  4.3. 연성능력 평가
  4.4. 에너지 소산능력 평가
 5. 결론
 참고문헌

키워드

역타공법 SRC기둥-RC보 접합부 긴 브라켓 짧은 브라켓 Top-down construction SRC column-RC beam connection long bracket short bracket

저자

  • 이강민 [ Lee, Kang-Min | 충남대학교 건축학부 교수, 공학박사 ]
  • 임재형 [ Lim, Jae-Hyung | 우송정보대학 리로델링건축과 교수, 공학박사 ] 교신저자
  • 문정호 [ Moon, Jeong-Ho | 한남대학교 건축학부 교수, 공학박사 ]
  • 오경환 [ Oh, Kyung-Hwan | 삼성물산(주)건설부문 ]
  • 김성호 [ Kim, Sung-Ho | 티섹구조엔지니어링(주) ]

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    대한건축학회지회연합회 [The Regional Association of Architectural Institute of Korea]
  • 설립연도
    2000
  • 분야
    공학>건축공학
  • 소개
    본회는 건축에 관한 학술․ 예술․ 기술을 연구 연마하는 지회회원들의 입지향상과 회원상호간의 친목도모와 함께 건축 문화창달에 기여함을 목적으로 한다. 목적을 달성하기 위하여 다음의 사업을 한다. 1. 지회회원의 입지향상과 친목도모 2. 건축에 관한 조사․연구지도 및 이에 관련된 사업 3. 회지, 논문집, 연구보고서 기타 건축에 관한 도서의 간행 4. 건축에 관한 강습회․강연회․간담회․전람회․견학회 등의 개최 5. 건축에 관한 계획, 감독, 기술검토에 대한 국가공공기관 기타의뢰에 관한 사항 6. 국내외 관계 제 학회와의 교류 및 회의참석 7. 기타 본회 목적달성에 필요한 사업

간행물

  • 간행물명
    대한건축학회연합논문집 [Journal of the Regional Association of Architectural Institute of Korea]
  • 간기
    격월간
  • pISSN
    1229-5752
  • 수록기간
    1999~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 540 DDC 690

이 권호 내 다른 논문 / 대한건축학회연합논문집 제11권 제2호 통권 38호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장