Earticle

초록

영어

The purpose of this study is showing the theory of the disassembly design for complete recycling of concrete which will be constructed from now which is based on the theory of the product design for resources circulation and recycling of concrete. For this study, analyzing the problem of trade-off in ‘Traditional Manufacturing System’ which is based on the input energy and performance of the recycling of the concrete that various disassembly process. The results are as flows. For a sustainable model scenario of the building, disassembly design of the product is essential for ‘Long Life Model’ and ‘Recycle Model’. However, the recycled aggregate and recycled cement by the waste concrete which is not considered DfDA(Design for Disassembly) is shows the typical problem of trade-off for energy consumption is big so as to become the high quality because of strong bonding strength which is demanded for concrete. The modeling of recycle process of ‘Traditional Manufacturing System’ and ‘Inverse Manufacturing System’ was possible in this research and was able to derive necessity of DfDA through this at time of the product design.

목차

Abstract
 1. 서 론
 2. 건축물의 지속가능형 모델의 구축
  2.1 제품의 지속가능형 설계를 위한 컨셉 모델
  2.2 콘크리트 구조물의 지속가능형 설계를 위한 컨셉 모델
 3. 폐콘크리트 재생프로세스의 트레이드오프 관계
  3.1 순환골재의 저품질 메커니즘
  3.2 재생시멘트의 저품질 메커니즘
 4. 순공정 생산시스템과 순역공정 생산시스템의 재생프로세스의 시나리오
  4.1 분해성 설계를 고려한 순역공정 생산시스템
  4.2 순공정 생산시스템과 순역공정 생산시스템의 모델화
  4.3 콘크리트 구조물의 재생시나리오에 있어서 분해성을 고려한 설계 플로우
 5. 결 론
 참고문헌

키워드

저자

• 안재철 [ Ahn, Jae-Cheol | 동경대학 건축학전공, JSPS연구원, 공학박사 ] 교신저자

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  대한건축학회연합논문집 [Journal of the Regional Association of Architectural Institute of Korea]

• 간기

  격월간

• pISSN

  1229-5752

• 수록기간

  1999~2026

• 등재여부

  KCI 등재

• 십진분류

  KDC 540 DDC 690