Earticle

The purpose of this study is to find the effective control method through the three-dimensional modeling of the irregular-shaped tall buildings and to develop the collaboration with architects and builders. Geometric characteristics of the model are correctly interpreted. The construction of the possoble structure and elevation of the system is to secure an alternative review of the technology. In the future, we have to secure the reasonable technology that must be able to respond to problems. therefore, bidding and construction of tall building projects in the planning stage will play a leading role.

A three dimensional model was developed to analyze the mold filling and solidification in the casting processes. The model uses the VOF method for the calculation of the free surface and the modified Equivalent Specific Heat method for the treatment of the latent heat evolution. The solution procedure is based on the SIMPLER algorithm. The complete model has been validated using the exact solutions for phase change heat transfer and the experimental results of broken water column. The three-dimensional model has been applied to the benchmark test and the results were compared to those from experiment, a two-dimensional analysis, and another three dimensional numerical model.

In this paper, a new algorithm is proposed for three-dimensional (3D) shape recognition using local features of model views and its sparse representation. The algorithm starts with the normalization of 3D models and the extraction of 2D views from uniformly distributed viewpoints. Consequently, the 2D views are stacked over each other to from view cubes. The algorithm employs the descriptors of 3D local features in the view cubes after applying Gabor filters in various directions as the initial features for 3D shape recognition. In the training stage, we store some 3D local features to build the prototype dictionary of local features. To extract an intermediate feature vector, we measure the similarity between the local descriptors of a shape model and the local features of the prototype dictionary. We represent the intermediate feature vectors of 3D models in the sparse domain to obtain the final descriptors of the models. Finally, support vector machine classifiers are used to recognize the 3D models. Experimental results using the Princeton Shape Benchmark database showed the average recognition rate of 89.7% using 20 views. We compared the proposed approach with state-of-the-art approaches and the results showed the effectiveness of the proposed algorithm.

본 논문에서는 3차원 평가환류체계를 기반한 성과측정모델을 제안하며, 제안하는 평가모델을 이용하여 2008년과 2009년에 수행한 7개의 공공 u-IT 서비스의 사용자 만족도와 활용도를 분석한다. 본 연구를 통해, 당초 공공 u-IT 서비스 지원사업이 목표하였던 대부분의 연구목적을 달성하였음을 알 수 있었으며, 성과측정 및 분석결과는 향후 추진할 신규과제의 추진방향 제시한다.

In this paper, we introduce an integrated performance evaluation model defined by the three indices (evaluation index for each evaluation stage, performance viewpoint, and performance type) and analyze the utilization and satisfaction of the seven public u-IT services implemented from 2008 to 2009 using the proposed model. From the performance results of the public u-IT services, it was found out that most of the research goals initially set by the public u-IT service support projects were satisfied. Furthermore, we suggest improvement directions and promotion strategies of future projects.

In this study, we proposed a three-dimensional (3D) scanning system based on laser-vision technique and rotary mechanism for automatic 3D model reconstruction. The proposed scanning system consists of a laser projector, a camera, and a turntable. For laser-camera calibration a new and simple method was proposed. 3D point cloud data of the surface of scanned object was fully collected by integrating extracted laser profiles, which were extracted from laser stripe images, corresponding to rotary angles of the rotary mechanism. The obscured laser profile problem was also solved by adding an addition camera at another viewpoint. From collected 3D point cloud data, the 3D model of the scanned object was reconstructed based on facet-representation. The reconstructed 3D models showed effectiveness and the applicability of the proposed 3D scanning system to 3D model-based applications.

3차원 비정상류모형을 사용하여 출도대지(出島台地)의 소유역에 있어서 인위적및 자연적 요인이 지하수유동에 미치는 영향에 대하여 고찰하였다. 3차원 비정상류모형의 검정을 위하여, 모형에 의한 수치해석해와 Theis의 해석해를 비교한 결과 서로 좋은 대응을 나타내었다. 모의발생은 용수로(用水路)를 통하여 관개가 시작되는 5월 1일부터 30일간 행하였다. 지하수 유동양상을 포텐샬도로 나타내었으며 그에 대한 고찰이 있었다. 본 해석으로 부터 인위적 영향을 받는 지역의 지하수유동계를 해석하기 위해서는 3차원 비정상류모형이 유용하다고 사료되었다.

This study investigates the effects of human impact and precipitation on groundwater flow conditions at a small area in Dejima Upland using a transient three-dimensional simulation. To show the utility of the transient three-dimensional model, the results of the numerical model are compared with those of Theis problem for which analytical solution is available. It appears that over the time period studied, the results of the model agree well with the analytical solution. Simulation is undertaken for a period of 30days starting from May 1st, when irrigation starts. Groundwater flow patterns determined by a numerical model are presented in the form of plotted potential lines and discussed. Results of simulation clearly indicate that the groundwater flow system should be analysed using a transient three-dimensional model, especially for the region which is effected by human impact.

물의 유동(流動)에 관한 계산상 효율성(效率性)을 갖는 자유수면(自由水面)을 고려한 3차원(次元) 유한차분(有限差分) 수직모형(數値模型)을 개발하였다. 수직모형(數値模型)은 연직방향(鉛直方向)에 대해 정규화(正規化)한 좌표(座標)(${\sigma}$-coordinate)를 사용하며, 시간(時間) 적분방법(積分方法)으로는 반음해법(半陰解法)(semi-implicit)을 사용하여 계산시간(計算時間)의 효율성(效率性)을 도모하였다. 모드분리(mode-splitting)개념을 도입하여 내부모드(internal mode)에 대해서는 양해법(陽解法)을 사용하였으며, 외부모드(external mode)는 수평방향(水平方向) 운동량방정식(運動量方程式)들과 연속방정식(連續方程式)의 차분식(差分式)으로부터 구한 타원형(楕圓型) 차분방정식(差分方程式)을 SOR방법에 의하여 해석하였다. 이와 같은 방법은 계산(計算) 시간간격(詩間間隔)이 표면(表面) 중력파(重力波)에 대한 CFL(Courant-Fredrich-Lewy)조건에 의해 제약을 받지 않아 계산시간(計算時間)의 효율성을 도모할 수 있다. 개발된 모형은 1차원(次元) 수로(水路)에서 취송유(吹送流)의 연직분포(鉛直分布)에 대한 해석해(解析解)와 비교(比較) 및 연직(鉛直) 가변격자(可變格子)의 도입에 따른 오차분석(誤差分析) 정사각형(正四角形) 호수(湖水)에서 취송유(吹送流) 계산(計算) 및 차분화(差分化) 상수(常數)들의 민감도(敏感度) 분석(分析)을 수행하였다.

A three-dimensional, finite difference, numerical model with free surface was developed on ${\sigma}$-coordinate. A semi-implicit numerical scheme in time has been adopted for computational efficiency. The scheme is essentially independent of the stringent stability criteria (CFL condition) for explicit schemes of external surface gravity wave. Implicit algorithm was applied for vertical shear stress, Coriolis force and pressure gradient terms. The reliability of the model with vertically variable grid system was checked by the comparison of simulation results with analytic solution of wind-driven currents in a one-dimensional channel. Sensitivity analysis of differencing parameters was carried out by applying the model to the calculation of wind-driven currents in a square lake.

The human knee joint is the intermediate joint of the lower limb that is the largest and most complex joint in the body. Understanding of joint-articulating surface motion is essential for the joint wear, stability, mobility, degeneration, determination of proper diagnosis and so on. However, many studies analyzed the passive motion of the lower limb because of the skin marker artefact and some studies described medial and lateral condyle of a femur as a simple sphere due to the complexity of geometry. Thus, in this paper, we constructed a three-dimensional geometric model of the human knee from the geometry of its anatomical structures using non-uniform B-spline surface fitting as a study for the kinematic analysis of more realistic human knee model. In addition, we developed and verified 6-DOF contact model of the human knee joint using $C^2$ continuous surface of the inferior region of a femur, considering the relative motion of shank to thigh during locomotion.

최근 정보보안의 중요성이 더욱 커지면서 대학의 정보보안 관련 학과를 포함한 민간 또는 사설 교육기관의 정보보안 관련 학과가 증가하고 있다. 이와 같은 교육기관의 커리큘럼을 분석한 결과 전공과목에 관련하여 NCS에서 언급하고 있는 직무능력과 많은 관련이 있는 것으로 보이며, 이는 직무능력별 표준화된 교육수준을 제공할 수 있는 장점이 있다. 하지만 교과목 기반의 교육과정은 교육 기관별 중복 커리큘럼, 강사의 수준에 따른 교육품질, 필요한 요소기술의 적시 교육 등에 대한 한계점이 발생할 수 있다. 본 논문에서는 대학 및 민간 또는 사설 교육기관의 교육과정을 분석하고, 한계점 해결을 위한 셀 기반 입체교육 모델을 제안한다. 제안하는 모델은 발생 가능한 한계점을 효과적으로 개선할 수 있음을 전문대학 교육과정을 기초로 검증한다.

Recently, the importance of information security has become greater. For this reason, the number of departments related to information security at universities and professional educational institutions is increasing. It is analyzed that the curriculum of such educational institutions has a lot to do with the job competency mentioned in NCS in relation to major subjects. This has the advantage of providing a standardized level of education for each job competency. However from the perspective of students there may be limitations on duplicate curriculum quality of education according to the level of teachers and timely acquisition of necessary elemental skills. In this paper we analyze the curriculum of universities and professional educational institutions and propose a cell-based three-dimensional education model to address the limitations of students. We verified based on the college curriculum that the proposed model can effectively improve its limitations.

밀도효과(密度效果)를 고려한 물의 유동(流動)에 관한 3차원(次元) 수치모형(數値模型)을 수립하여, 정상수역(靜上水域)으로의 표면온배수(表面溫排水) 확산문제(擴散問題)를 해석하였다. 수립된 수치모형(數値模型)은 수심방향에 대해 정규화(正規化)한 좌표(座標)(${\sigma}$-coordinate)에서 무차원화(無次元化)된 식들을 사용하며, 시간(時間) 적분방법(積分方法)으로는 반음해법(半陰解法)을 사용하여 계산시간의 효율성(效率性)을 도모하였다. 온배수확산(溫排水擴散) 수리실험결과(水理實驗結果)와의 비교를 통하여 모형의 신뢰성(信賴性)을 검토하였으며, 온배수(溫排水) 확산(擴散)(밀도류(密度流)) 계산시 연직확산계수(鉛直擴散係數)와 성층효과(成層效果)를 고려하기 위해 사용되는 안정함수(安定函數)의 여러 형태에 대한 계산결과를 비교하였다. 수립된 모형은 수리실험자료(水理實驗資料)와 일치하는 양호한 계산결과를 보였다. 온배수 확산 모의시 연직(鉛直) 확산계수(擴散係數)의 공간적(空間的) 분포(分布)를 고려해야함을 확인할 수 있었으며, 표면온배수 확산을 정확히 모의하기 위해서는 기존에 널리 사용되는 안정함수(安定函數)가 수정될 필요가 있었다.

A three-dimensional numerical model of surface buoyant jets with variable density was established. The model uses fully nonlinear, time-dependent, three-dimensional, ${\sigma}$-transformed equations of motion and equation of heat transport. A semi-implicit numerical scheme in time has been adopted for computational efficiency. The model was applied for thermal jets discharging into a stagnant water and the simulated results were compared with a hydraulic experimental data set showing good agreement. Comparative studies of exchange coefficients and stability functions indicated that spatial variation of exchange coefficients should be considered and the existing stability functions should be modified to simulate surface buoyant jets accurately.

황해(黃海) 및 동지나해(東支那海)의 동수역학적(動水力學的) 3차원수치(次元數値)모델이 이 해역(海域)의 조석(潮汐), 해일(海溢), 항류순환(恒流循環) 및 조경(潮境) 등(等)의 물리적과정(物理的過程)을 연구(硏究)하기 위해 개발(開發)되었다. 본(本) 연구(硏究)에서 동지군해(東支郡海)의 3 차원(次元)모델은 1978년(年) 하절(夏節)의 5 일간(日間), 태풍(颱風)(웬디호(號))에 의(依)해 야기(惹起)된 해일(海溢)에 의한 해류분포(海流分布)를 산정(算定)하는데 적용(適用)되었다. 산정(算定)된 황해(黃海)와 동지나해(東支那海)의 지역적(地域的) 수심별해류분포(水深別海流分布)가 제시(提示)되었으며 분석검통(分析檢討)되었다. 본(本) 연구(硏究)는 역학원리(力學原理)에 입각(立脚)한 동지군해(東支郡海)의 태풍해일(颱風海溢) 예보체계(豫報體系)의 수립(樹立) 위(爲)한 첫 시도(試圖)로서 수행(遂行)된 것이다.

A three-dimensional hydrodynamic numerical model of the Yellow Sea and the East China Sea was developed to investigate the intermediate scale processes in the region. The model was applied to the three dimensional computation of the typhoon induced currents on the continental: shelf for a 5 days period in Summer, 1978. The circulation pattern showing depth and spatial distribution of currents over the Yellow Sea and the East China Sea is presented and analyzed. This initial study has been undertaken in association with the programme of establishment of real-time forecasting schemes based on dynamic principles.

PURPOSES : In this study, a three-dimensional nonlinear finite element analysis (FEA) model for airport concrete pavement was developed using the commercial program ABAQUS. Users can select an analysis method and set the range of input parameters to reflect actual conditions such as environmental loading. METHODS : The geometrical shape of the FEA model was chosen by considering the concrete pavement located in the third-stage construction site of Incheon International Airport. Incompatible eight-node elements were used for the FEA model. Laboratory test results for the concrete specimens fabricated at the construction site were used as material properties of the concrete slab. The material properties of the cement-treated base suggested by the Federal Aviation Administration(FAA) manual were used as those of the lean concrete subbase. In addition, preceding studies and pavement evaluation reports of Incheon International Airport were referred for the material properties of asphalt base and subgrade. The kinetic friction coefficient between the concrete slab and asphalt base acquired from a preceding study was used for the friction coefficient between the layers. A nonlinear temperature gradient according to slab depth was used as an input parameter of environmental loading, and a quasistatic method was used to analyze traffic loading. The average load transfer efficiency obtained from an Heavy falling Weight Deflectomete(HWD) test was converted to a spring constant between adjacent slabs to be used as an input parameter. The reliability of the FEA model developed in this study was verified by comparing its analysis results to those of the FEAFAA model. RESULTS : A series of analyses were performed for environmental loading, traffic loading, and combined loading by using both the model developed in this study and the FEAFAA model under the same conditions. The stresses of the concrete slab obtained by both analysis models were almost the same. An HWD test was simulated and analyzed using the FEA model developed in this study. As a result, the actual deflections at the center, mid-edge, and corner of the slab caused by the HWD loading were similar to those obtained by the analysis. CONCLUSIONS : The FEA model developed in this study was judged to be utilized sufficiently in the prediction of behavior of airport concrete pavement.

Most of agricultural structures located in seashore could not avoid rapid deterioration of concrete because chloride-ion and $CO_2$ gradually penetrate into concrete. However, since most of models can be able to describe the phenomenon of penetration by using one or two dimensional models based on finite difference method (FDM), those modes can not simulate the real geometry and it takes a lot of computational time to complete even the calculation. To overcome those weaknesses, three dimensional numerical model considering time dependent variables such as surface concentration of chloride and diffusion coefficient of domain based on finite element method (FEM) was suggested. This model also included the neutralization occurred by the penetration of $CO_2$. Because the model used various sizes of tetrahedral mesh instead of equivalent rectangular mesh, it reduced the computational time to compare with FDM. As this model is based on FEM, it will be easily extended to execute multi-physics simulation including water evaporation and temperature change of concrete.

유한차분법으로 3차원 점성토 수송 모델 COSETM-3을 개발하여 개수로의 중층에서 시간에 따른 부유니의 상대농도에 관한 실험결과(實驗結果)와 비교하였으며, 그 결과 잘 일치하였다. 모델의 현지(現地) 적용성(適用性)과 수영만(水營灣)의 SS(Suspended Solids) 확산을 조사하기 위해 대조기(大潮期) 수평시(平水時)와 홍수시(洪水時)에 모델을 수영만에 적용하여 수영강(水營江)에서 유출되는 SS의 거동(擧動)을 해석하였으며, 그 결과 현지의 SS 거동을 정성적으로 잘 예측하였다. 침강속도가 SS의 농도분포에 미치는 영향에 대해서도 검토하였다. 침강(沈降)을 고려하지 않은 경우 SS 농도는 표층이 저층보다 높게 나타났으나, 침강(沈降)을 고려했을 경우에는 저층이 표층보다 높게 나타났다. 그리고, 표층에서는 활발한 해수교환으로 인해 SS의 변동폭이 크게 나타났으나, 저층에서는 해수교환(海水交換)이 약하기 때문에 SS의 변동폭이 상대적으로 작게 나타났다. 홍수시(洪水時) SS 확산패턴은 평수시(平水時)와 유사하게 나타났으나, SS 농도는 평수시(平水時)보다 훨씬 높게 나타났다. 첨두유량이 발생할 때까지 SS 농도는 점차 증가하였으나, 첨두유량이 발생한 이 후부터 SS 농도는 유출량(流出量)의 감소로 인해 점차 감소하였다.

Three-dimensional cohesive sediment transport model, COSETM-3, is develpoed using a finite difference method. The model results are compared with the physical experimental results for the relative concentration with time at the mid-depth of the recirculating flume and are found to be in good agreement. This model is applied to Suyoung Bay in Pusan of Korea to verify the field applicability of the model and to investigate on the SS (suspended solids) diffusion phenomena at the bay. Behaviors of discharging SS from Suyoung River at normal river flow and flood river flow are predicted. The numerical results appear to be reasonable and qualitative agreement with field data. The influence of settling velocity on the concentration distribution of SS is also investigated. In case of not considering settling velocity, SS concentration at surface layer is higher than that at lower layer, but in case of considering settling velocity, SS concentration at lower layer is higher than that at surface layer. The fluctuation of SS concentration at surface layer is large due to the strong mixing, but the fluctuation of the concentration at lower layer is small due to the weak mixing. SS diffusion patterns at flood river flow are similar to those at normal river flow, while the concentration at that flow is so much higher than that at this flow. SS concentration increases with time until the peak discharge occurs, but the concentration decreases with time with decreasing river flow after the peak discharge.

Particles reinforced MMCs have many advantages over monolithic metals including a higher specific modulus, higher specific strength, better properties at elevated temperatures and better wear resistance. SiC$_p$/A16061 composites have good results in its mechanical properties. This work investigates SiC$_p$/A16061 composites in the microscopic view and compares the analytical results with the experimental ones. The discrepancy of the material properties between the reinforced particle, SiC$_p$, and the matrix material, A16061 appears to be so significant. Especially the coefficient of thermal expansion(CTE) of A16061 is 5 times larger than that of SiC$_p$. Thermal residual stress in MMCs is induced at high temperatures. The shape of particle is various but the theoretical model is not able to consider the nonuniform shape. Particle distribution is not homogeneous in experimental specimen. However, it is assumed to be homogeneous in simulation model. The shapes of particles are assumed to be not only perfect global but hexahedral shapes. The types of particle distribution are two - simple cubic array(SC array) and face-centered cubic array(FCC array).

본 연구는 3차원 서비스품질 모형을 적용한 공공도서관 서비스품질이 이용자 만족도와 이용자 충성도에 어떻게 영향을 미치는가를 파악하기 위해 연구모형을 설계하고 검증하였다. 이를 위해 지역 및 도서관 특성을 고려하여 서울 및 경기도 21개의 공공도서관에서 이용자 설문조사를 실시하여 유효표본 353부를 연구에 사용하였다. 분석 결과, 서비스품질의 물리적환경품질(PQ), 상호작용품질(IQ), 결과품질(OQ)은 이용자 만족도(US)에 영향을 미치는 것으로 나타났다. 서비스품질의 결과품질(OQ)은 이용자 충성도(UL)에 영향을 미치는 것으로 나타났다. 이용자 만족도(US)는 이용자 충성도(UL)에 영향력이 있음을 파악하였다. 이용자 만족의 선행요인으로 품질의 향상은 이용자의 만족도 향상에 직접적으로 영향을 주고, 이용자 충성도에 영향을 주는 핵심요인은 이용자 만족도이며, 서비스 결과에 대한 품질 인식은 이용자 만족도와 이용자 충성도에 직·간접적으로 영향을 주었다. 변화하는 공공도서관 이용자의 욕구에 대한 대응을 할 수 있는 연구가 활발히 이루어져야 할 것이다.

This study aimed to develop and validate a research model to investigate how the service quality of public libraries, where a 3-dimensional service quality model was applied, impacts user satisfaction and loyalty. We collected 353 valid responses through a survey targeting public library users across 21 locations, considering various regional and library-specific characteristics. Our analysis revealed that physical environment quality (PQ), interaction quality (IQ), and outcome quality (OQ) of service quality influence user satisfaction (US). Additionally, outcome quality (OQ) of service quality impacts user loyalty (UL), and user satisfaction (US) affects user loyalty (UL). We also found that quality improvement is a leading factor for user satisfaction, user satisfaction is the primary factor of user loyalty, and the perception of service quality directly and indirectly affects user satisfaction and loyalty. We concluded that continuous research should be actively conducted to respond to the evolving needs of public library users.

The digital terrain model (DTM) or digital elevation model (DEM) is commonly used in representing the continuous variation of relief over space. One of the most frequent applications is to display the three dimensional view of the landform concerned. In this paper, the altitude matrices-regular grid cell format of the elevation in Mt. Kyeryong National Park were used in developing the three dimensional view software for the first time in Korea. It required the removal of hidden lines or surfaces. To do this, it was necessary to identify those surfaces and line segments that are visible and those that are invisible. Then, only the visible portions of the landform were displayed. The assumption that line segments are used to approximate contour surfaces by polygons was used in developing the three dimensional orthographic view. In order to remove hidden lines, the visibility test and masking algorithms were used. The software was developed in the engineering workstation, SUN 3/280 at the Institute of Space Science and Astronomy using 'C' in UNIX operating system. The software developed in this paper can be used in various fields. Some of them are as follows : (1) Landscape design and planning for identifying viewshed area(line of sight maps) (2) For planning the route selection and the facility location (3) Flight simulation for pilot training (4) Other landscape planning or civil engineering purposes

연구배경:　우리나라를 포함한 중국, 대만, 북한, 일본 등에서 원전, 재처리시설과 같은 원자력시설의 증가에 따라 주변국 핵활동 분석의 종합적 대책이 필요하다. 우리나라와 포괄적핵실험금지조약기구(Comprehensive Nuclear-Test-Ban Treaty Organization, CTBTO)는 동북아시아 지역에서 핵종 탐지소를 운영 중으로, 핵종탐지 장비에서 특이 값 측정시 모니터링 자료의 분석과 더불어 배출원 탐색모델을 이용하여 핵종의 기원이 어디인지 추정하고 평가하는 것은 주변국 핵활동에 대한 감시 및 안전성 확보 측면에서 중요하다. 재료 및 방법: 주변국의 은밀한 핵활동 시 방사성핵종의 기원을 추정하기 위하여 3차원 전진/후진형 궤적모델을 개발하였다. 개발된 궤적모델은 궤적 미분방정식을 유한차분법을 이용한 방법으로 주어진 바람자료를 이용하여 방사성핵종의 방출지점으로부터 입자의 궤적을 순차적으로 찾아가는 전진형 모델과 시간 역산으로 방출기원을 추정하는 후진형 모델로 구성되었다. 결과 및 논의: 개발된 궤적모델의 검증을 위하여 체르노빌 사고 당시 측정된 농도자료를 이용하였다. 검증결과 관측지점의 농도가 높게 측정된 지점과 방출기원에서 가까운 지역으로부터 시간 역산의 방출지점을 추정한 결과의 정확도가 높았다. 3차원 궤적모델은 방출시간, 방출높이, 방출간격 등의 변수에 의해 계산결과가 달라지는 불확도를 내포하고 있는데, 이러한 궤적모델의 불확도를 최소화하기 위해 한국원자력연구원에서 개발한 대기확산모델(long-range accident dose assessment system, LADAS)를 이용하여 fields of regards (FOR) 기법에 의해 오염물 방출영역을 추정한바 신뢰성 있는 결과를 얻었다. 결론: 본 연구를 통하여 개발된 배출원 탐색모델은 주변국의 은밀한 핵활동 시 핵종 탐지장비와 연계하여 방사성핵종의 방출지역과 기원을 파악하여 우리나라의 핵종탐지 능력을 향상하고 핵활동 및 방사선 안전 분야에서 주도적 역할을 할 수 있을 것으로 생각된다.

Background: It is necessary to consider the overall countermeasure for analysis of nuclear activities according to the increase of the nuclear facilities like nuclear power and reprocessing plants in the neighboring countries including China, Taiwan, North Korea, Japan and South Korea. South Korea and comprehensive nuclear-test-ban treaty organization (CTBTO) are now operating the monitoring instruments to detect radionuclides released into the air. It is important to estimate the origin of radionuclides measured using the detection technology as well as the monitoring analysis in aspects of investigation and security of the nuclear activities in neighboring countries. Materials and methods: A three-dimensional forward/backward trajectory model has been developed to estimate the origin of radionuclides for a covert nuclear activity. The developed trajectory model was composed of forward and backward modules to track the particle positions using finite difference method. Results and discussion: A three-dimensional trajectory model was validated using the measured data at Chernobyl accident. The calculated results showed a good agreement by using the high concentration measurements and the locations where was near a release point. The three-dimensional trajectory model had some uncertainty according to the release time, release height and time interval of the trajectory at each release points. An atmospheric dispersion model called long-range accident dose assessment system (LADAS), based on the fields of regards (FOR) technique, was applied to reduce the uncertainties of the trajectory model and to improve the detective technology for estimating the radioisotopes emission area.Conclusion: The detective technology developed in this study can evaluate in release area and origin for covert nuclear activities based on measured radioisotopes at monitoring stations, and it might play critical tool to improve the ability of the nuclear safety field.

이 연구는 한국인 성인 시신의 얼굴근육을 해부하고 삼차원 스캔하여, 사실적인 얼굴근육의 형태를 삼차원 오브 젝트를 만들고, 이를 통해 표정을 재현하여 카데바 얼굴근육의 복합적인 움직임을 삼차원적으로 관찰 가능한 교육 자료 를 제작하는데 목적이 있다. 카데바 해부 사진 자료를 이용하여, 얼굴근육에 대해 삼차원 모델링 하였고, 네 가지 표정 (슬픔, 미소, 놀람, 분노)에 따라 얼굴근육이 변화하는 삼차원 영상을 제작하였다. 이를 통해, 삼차원으로 구현한 카데바 얼굴근육의 복합적인 작용과 다양한 표정 변화를 확인할 수 있었다. 이 연구결과는 얼굴근육의 개별적인 기능에 대한 정량적인 자료를 확인할 수는 없지만, 사실적이고 입체적인 카데바의 얼굴근육 형태를 관찰할 수 있고, 복합적인 얼굴근육의 작용으로 인한 표정 변화를 확인할 수 있다. 이러한 자료는 얼굴근육의 해부학적 교육 자료로 활용할 수 있을 것으로 기대한다.

This study dissected and three-dimensionally (3D) scanned the facial muscles of Korean adult cadavers, created a three-dimensional model with realistic facial muscle shapes, and reproduced facial expressions to provide educational materials to allow the 3D observation of the complex movements of cadaver facial muscles. Using the cadavers’ anatomical photo data, 3D modeling of facial muscles was performed. We produced models describing four different expressions, namely sad, happy, surprised, and angry. We confirmed the complex action of the 3D cadaver facial muscles when making various facial expressions. Although the results of this study cannot confirm the individual functions of facial muscles quantitatively, we were able to observe the realistic shape of the cadavers’ facial muscles, and produce models that would show different expressions depending on the actions performed. The data from this study may be used as educational materials when studying the anatomy of facial muscles.