Earticle

본 논문은 플렉시블 디스플레이용 stainless steel(SS) 기판의 평탄막 재료로서 유기 및 유기/무기 하이브리드 에폭시 레진을 연구한 첫 결과를 보고한다. 유기 에폭시로는 diglycidyl ether of bisphenol A(DGEBA)를, 하이브리드 에폭시는 실세스퀴옥산이 포함된 octa(dimethylsiloxypropylglycidylether) silsesquioxane(OG)를 선택하였다. 경화제로는 diaminodiphenylmethane(DDM)을 에폭시와 1 : 2 당량비로 사용하였으며 두 물질 모두 SS 기판위에 어려움 없이 코팅이 되었다. TGA로 살펴본 열 안정성 분석은 순수한 물질이나 경화된 필름이나 모두 OG가 DGEBA 보다 안정하며 AFM에 의한 필름 표면의 관찰은 필름이 충분히 두꺼운 경우$(>\;1\;{\mu})\;1{\sim}2\;nm$ 정도의 표면 거칠기 값을 갖는 평탄한 면이 얻어진다는 것을 보여주었다. 또 이 필름들은 $0{\sim}10000$ 초에 걸치는 시간 동안 100 V와 $100^{\circ}C$의 외부 스트레스를 받은 후에도 일정한 유전 상수(${\sim}3.5$), 정전 용량 및 전류의 흐름을 나타내 절연 특성이 안정되어 있다는 것을 알 수 있었다.

This paper reports the first results of a series of planarization film study for the stainless steel (SS) substrates for flexible displays. Diglycidyl ether of bisphenol A (DGEBA) and octa(dimethylsiloxypropylglycidylether) silsesquioxane (OG) were chosen for the organic and the hybrid epoxies respectively and diaminodiphenylmethane (DDM) was used as a curing agent at 1:2 stoichiometric ratio. These materials were spin-coated on SS substrates and thermal-cured. TGA study indicated that both the pristine and the cured OG were more thermally stable than DGEBA. AFM study showed that the smooth surfaces of $1{\sim}2\;nm$ roughness can be prepared for both DGEBA and OG when the films were thick ($>\;1\;{\mu}$). The electrical properties such as dielectric constant, capacitance and the leakage current with respect to the applied voltage were all stable even after the stress of $100\;V/100^{\circ}C$ was applied for $0{\sim}10000$ seconds indicating that the insulating properties of DGEBA and OG films were very reliable.

남동 태평양의 위도 $5^{\circ}N\~12^{\circ}S$, 경도 $115^{\circ}$ 해역에서 1980년 12월 9일부터 1981년 4월 2일에 걸쳐 조업한 참치 어장 야장과 DBT 기록 테이프를 정리여, 어획된 해구의 각 정점마다의 수온 연직 구조 및 남동 태평양의 해양 환경과 그에 따른 어획물 포를 알아본 결과는 다음과 같다. 본 연구에서 조업이 행해진 해역은 위도 $5^{\circ}N\~12^{\circ}S$의 적도 용승역을 포함하는 남적도 해류역이였으며, 이 해역의 1, 2, 3월의 깊이 10m의 수온 수평분 포도를 살펴보면 거의 모든 해역의 온도가 $25^{\circ}C$ 정도임을 알 수 있다. 또, 위 해역의 염분은 $34.80\~35.00\%_{\circ}$ 였다. 한편 위 해역에서 눈다랑어와 황다랑어는 수온 약층의의 상부 수심 100m 정도에서 수온 약층 하부 수심 300m 까지의 수온차가 약 $12^{\circ}C$ 정도되는 SW type의 수온 연직 구조에서 주로 어획이 되었고, 수온 약층의 깊이가 깊을 수록 어획량이 많아지고 있다. 또한 날개다랑어는 온도 $8\~26^{\circ}C$이며 수심 50m 간격간의 수온 차가 약 $2.5^{\circ}C$로 균일한 변화를 나타내는 가장 완만한 형태인 SS type의 수온 연직 구조에서 주로 어획이 되었다. 그리고 눈다랑어의 최소한의 산소 요구량인 1ml/l 등양면의 깊이는 $140\~100^{\circ}W$에서는 주로 $200\~100m$ 수심이며 $110^{\circ}W$에서 부터 남미대륙쪽으로갈수록 등양면(1ml/l)의 길이는 100m 정도로 낮아진다. 어획량의 수평 분포를 살펴보면 남적도 해류역에서 눈다랑어가 황다랑어 보다 더 많이 어획되었다. 그리고, 남북미 대륙쪽에 가까와질수록 주 수온 약층 아주 얕아지고 그 기울기가 급하게 되며, 또 1ml/l 용재 산소 등양면의 깊이가 낮아질수록 황다랑어와 눈다랑어의 어획량이 줄고 있음을 고찰할 수 있다.

The relationship between the catches of tuna and hydrographic conditions in South-East Pacific region (latitude $5^{\circ}N-12^{\circ}S$, longitude $135^{\circ}W-115^{\circ}W$) was investigated by using the catch data of tuna and Digital Bathythermograph (DBT) data from December 9, 1980 to April 2, 1981. The results are as follows : The study area were located in South Eguatorial Current regions including equatorial upwelling regions in $5^{\circ}N\;to\;12^{\circ}S$. The horizontal mean temperature at the depth of 10m on the first quarter months in the study area was about $25^{\circ}C$C and the salinity of those fishing areas ranged from 34.8 to $35.0\%_{\circ}$. Yellowfin tuna and bigeye tuna were mainly caught in SW vertical temperature profile type, which the depth of thermocline ranged from loom to 300m, and temperature difference of thermocline was about $12^{\circ}C$. The deeper the depth of thermocline, the more the catches of tuna. While albacore tuna was caught well in SS vertical temperature profile type which the temperature of thermocline ranged from $9^{\circ}\;to\;26^{\circ}C$ and its gradient was very smooth. The depth of 1 ml/l surface of dissoved oxygen content ranged from loom to 200m in the South-East Pacific between longitude $140^{\circ}W-100^{\circ}W$, but it was shallower than 100 m near the North-South American continent. The catches of bigeye tuna were larger than those of yellowfin tuna in South Equatorial Current region. As approaching to the South and North American continent, the catches of yellowfin tuna and bigeye tuna decreased because the thermocline becomes shallower and steeper and the depth of the 1 m1/1 surface of dissolved oxygen content became shallower.

남동 태평양의 위도 $5^{\circ}N\~12^{\circ}S$, 경도 $115^{\circ}$ 해역에서 1980년 12월 9일부터 1981년 4월 2일에 걸쳐 조업한 참치 어장 야장과 DBT 기록 테이프를 정리여, 어획된 해구의 각 정점마다의 수온 연직 구조 및 남동 태평양의 해양 환경과 그에 따른 어획물 포를 알아본 결과는 다음과 같다. 본 연구에서 조업이 행해진 해역은 위도 $5^{\circ}N\~12^{\circ}S$의 적도 용승역을 포함하는 남적도 해류역이였으며, 이 해역의 1, 2, 3월의 깊이 10m의 수온 수평분 포도를 살펴보면 거의 모든 해역의 온도가 $25^{\circ}C$ 정도임을 알 수 있다. 또, 위 해역의 염분은 $34.80\~35.00\%_{\circ}$ 였다. 한편 위 해역에서 눈다랑어와 황다랑어는 수온 약층의의 상부 수심 100m 정도에서 수온 약층 하부 수심 300m 까지의 수온차가 약 $12^{\circ}C$ 정도되는 SW type의 수온 연직 구조에서 주로 어획이 되었고, 수온 약층의 깊이가 깊을 수록 어획량이 많아지고 있다. 또한 날개다랑어는 온도 $8\~26^{\circ}C$이며 수심 50m 간격간의 수온 차가 약 $2.5^{\circ}C$로 균일한 변화를 나타내는 가장 완만한 형태인 SS type의 수온 연직 구조에서 주로 어획이 되었다. 그리고 눈다랑어의 최소한의 산소 요구량인 1ml/l 등양면의 깊이는 $140\~100^{\circ}W$에서는 주로 $200\~100m$ 수심이며 $110^{\circ}W$에서 부터 남미대륙쪽으로갈수록 등양면(1ml/l)의 길이는 100m 정도로 낮아진다. 어획량의 수평 분포를 살펴보면 남적도 해류역에서 눈다랑어가 황다랑어 보다 더 많이 어획되었다. 그리고, 남북미 대륙쪽에 가까와질수록 주 수온 약층 아주 얕아지고 그 기울기가 급하게 되며, 또 1ml/l 용재 산소 등양면의 깊이가 낮아질수록 황다랑어와 눈다랑어의 어획량이 줄고 있음을 고찰할 수 있다.

The relationship between the catches of tuna and hydrographic conditions in South-East Pacific region (latitude $5^{\circ}N-12^{\circ}S$, longitude $135^{\circ}W-115^{\circ}W$) was investigated by using the catch data of tuna and Digital Bathythermograph (DBT) data from December 9, 1980 to April 2, 1981. The results are as follows : The study area were located in South Eguatorial Current regions including equatorial upwelling regions in $5^{\circ}N\;to\;12^{\circ}S$. The horizontal mean temperature at the depth of 10m on the first quarter months in the study area was about $25^{\circ}C$C and the salinity of those fishing areas ranged from 34.8 to $35.0\%_{\circ}$. Yellowfin tuna and bigeye tuna were mainly caught in SW vertical temperature profile type, which the depth of thermocline ranged from loom to 300m, and temperature difference of thermocline was about $12^{\circ}C$. The deeper the depth of thermocline, the more the catches of tuna. While albacore tuna was caught well in SS vertical temperature profile type which the temperature of thermocline ranged from $9^{\circ}\;to\;26^{\circ}C$ and its gradient was very smooth. The depth of 1 ml/l surface of dissoved oxygen content ranged from loom to 200m in the South-East Pacific between longitude $140^{\circ}W-100^{\circ}W$, but it was shallower than 100 m near the North-South American continent. The catches of bigeye tuna were larger than those of yellowfin tuna in South Equatorial Current region. As approaching to the South and North American continent, the catches of yellowfin tuna and bigeye tuna decreased because the thermocline becomes shallower and steeper and the depth of the 1 m1/1 surface of dissolved oxygen content became shallower.

타이태늄은 뛰어난 생체적합성과 적절한 물리적 성질을 바탕으로 치과 및 정형외과 영역의 매식재로 널리사용되어져 왔으며, 골과 매식재 사이의 골 융합 정도를 증가시킬 목적으로 물리, 화학적인 방법을 이용한 타이태늄의 표면처리에 관한 많은 연구들이 진행되어 왔다. 최근에는 부착단백질 또는 성장인자를 이용한 생체재료의 표면개질을 통하여 조직적합성 및 치유 능의 개선을 위한 시도들이 있어왔다. Fibronectin(FN)은 주요 세포외기질중의 하나로 생체 내 널리 분포하여 세포의 부착, 이동 및 증식에 관여하는 거대 당단백으로, RGD및 PHSRN 펩타이드 서열이 세포의 인테그린과 결합하여 세포의 활성을 조절하는 것으로 알려져 있다. 이 연구에서는 FN으로 처리된 타이태늄이 조골세포의 부착, 증식 및 분화에 미치는 영향과 이에 따른 석회화 정도에 미치는 영향을 관찰하여 부착분자를 이용한 타이태늄 표면개질의 효과를 규명하고자 하였다. 상업용 순수 타이태늄을 gold thiol법을 이용하여 표면처리 후, 혈장 FN(plasma FN, pFN)과 유전자재조합법을 이용하여 얻은 FN조각(FN type III 7-10, FNIII 7-10)을 피복한 시편을 실험군으로, 아무런 처리를 하지 않은것(smooth surface, SS)과 산 부식(Sandblasted and acid etched, SLA)처리된것을 대조군으로 이용하였다. 배양된 조골세포주(MC3T3-E1)를 사용하여 타이태늄 표면 처리에 따른 세포의 증식, 형태변화, 알칼리성 인산분해효소(ALPase) 생산 및 세포면역형광법을 이용한 분화정도를 시간 경과에 따라 관찰하였다. 조골세포증식의 경우 FNIII 7-10 처리군에서 pFN 처리군 및 대조군에 비해 시간경과에 따라 유의성있는 세포수의 증식이 관찰되었으며(p<0.05), ALPase 생성의 경우에도 FNIII 7-10 처리 군에서 아무 처리도 하지 않은 군에 비해 유의성 있게 높은 효소의 생성이 관찰되었다(p<0.05). 주사전자현미경을 이용한 세포의 형태관찰결과 아무 처리도 하지 않은 군에서는 마름모형태를 나타내었으며, 산 부식 처리된 군에서는 세포가 가시모양의 형태를 보인 반면 FN으로 처리된 두 군에서는 세포의 부착 및 펴짐이 매우 발달되어 있는 모습이 관찰되었다. 세포의 분화정도를 관찰하기 위하여 국소부착키나제(focal adhesion kinase, FAK), 및 actin stress fiber의 분포양상을 세포면역형광법을 이용하여 관찰한 결과 FN으로 표면처리된 두 군에서 아무런 처리도 하지않은 군 및 산 부식처리 한 군에 비해 프라크의 발현이 높게 나타났으며 잘 발달된 actin stress fiber의 소견을 나타내었다. 이 실험의 결과들은 gold thiol 법을 이용한 표면처리 후 FN부착을 통한 타이태늄의 표면개질이 조골세포의 부착, 증식 및 분화에 중요한 역할을 담당하여 석회화 정도를 촉진시키는 것을 보여주었으며, 이런 결과들은 더 짧은 FN조각을 이용한 다른 생체재료의 표면개질에 폭 넓게 응용할 수 있으리라 생각된다.

To study the direct effect of somatostatin (SS) on calcium channel current ($I_{Ba}$) in guinea-pig gastric myocytes, $I_{Ba}$ was recorded by using whole-cell patch clamp technique in single smooth muscle cells. Nicardipine ($1{\mu}M$), a L-type $Ca^{2+}$ channel blocker, inhibited $I_{Ba}$ by $98{\pm}1.9$% (n=5), however $I_{Ba}$ was decreased in a reversible manner by application of SS. The peak $I_{Ba}$ at 0 mV were decreased to $95{\pm}1.5$, $92{\pm}1.9$, $82{\pm}4.0$, $66{\pm}5.8$, $10{\pm}2.9$% at $10^{-10}$, $10^{-9}$, $10^{-8}$, $10^{-7}$, $10^{-5}$ M of SS, respectively (n=3∼6; $mean{\pm}SEM$). The steady-state activation and inactivation curves of $I_{Ba}$ as a function of membrane potentials were well fitted by a Boltzmann equation. Voltage of half-activation ($V_{0.5}$) was $-12{\pm}0.5$ mV in control and $-11{\pm}1.9$ mV in SS treated groups (respectively, n=5). The same values of half-inactivation were $-35{\pm}1.4$ mV and $-35{\pm}1.9$ mV (respectively, n=5). There was no significant difference in activation and inactivation kinetics of $I_{Ba}$ by SS. Inhibitory effect of SS on $I_{Ba}$ was significantly reduced by either dialysis of intracellular solution with $GDP_{\beta}S$, a non-hydrolysable G protein inhibitor, or pretreatment with pertussis toxin (PTX). SS also decreased contraction of guinea-pig gastric antral smooth muscle. In conclusion, SS decreases voltage-dependent L-type calcium channel current ($VDCC_L$) via PTXsensitive signaling pathways in guinea-pig antral circular myocytes.

In this paper, we introduce the Semi-Spherical CVT(SS-CVT), which is characterized by its simple structure, infinite torque multiplication feature, and specific operating principles, with a kinematic analysis. The SS-CVT transmits the power using the rolling resistance between the metal on metal currently and realizes the smooth transitions between the forward / neutral / reverse states of output shaft by manipulating only one shifting actuator without a clutch. Using these special features of SS-CVT, we propose a prototype Hybrid vehicle equipped with a DC motor as a complementary power source. To build the prototype vehicle, we present the design processes and numerical investigations of its capabilities in this study.

Objectives: The study aimed to isolate the abundant bacteria in dental caries in children and to investigate the bacterial species involved in addition to those that have been previously reported. Methods: The specimens were collected from the supragingival plaques of each dental caries area, pit and fissure caries, deep dentinal caries, smooth surface caries, and dental caries, and from healthy subjects in the control group. Bacteria were cultured from these specimens, DNA was extracted from the isolated bacteria, and the 16S rRNA gene sequences were analyzed and identified. Results: Based on the results of the 16S rRNA gene sequence analysis for the 90 strains of dominant bacteria from the 45 specimens, 5, 7, 8, 7, and 13 species were identified from the supragingival plaques from healthy teeth, pit and fissure caries, deep dentinal caries, smooth surface caries, and dental caries, respectively. In healthy teeth, Actinomyces naeslundii dominated. Corynebacterium durum, Ralstonia pickettii, and Streptococcus intermedius showed equal distribution. The dominant bacterial species in dental caries, S. sanguinis, showed the greatest difference in prevalence in pit and fissure caries. In deep dentinal caries, S. mutans and Lactobacillus rhamnosus were dominant; in smooth surface caries, S. mutans and S. sanguinis were dominant; and in the supragingival plaques of dental caries, S. sanguinis and S. mutans were dominant. Conclusions: The bacterial species isolated from dental caries encompassed four phyla, eight genera, and 22 species. In addition, the SS1-2 strain, belonging to the genus Neisseria, was identified as a new species from among the isolated strains.

Salmonellosis is one of the life-threating diseases of goat in Bangladesh. Therefore, the present study was designed to study the prevalence of Salmonellosis, and isolation and characterizations of the Salmonella spp. from apparently healthy and diarrheic goat. A total of 47 faces samples were collected from selected place and cultured onto different prescribed medium to isolate it. In this study, 12.76% (6/47) samples were found to be positive for Salmonella spp. During culture on SS agar medium, all of the Salmonella isolates produced round, smooth, opaque, translucent and black color colonies on SS agar media. All of the isolated Salmonella spp. fermented dextrose, maltose and mannitol with production of acid and gas but did not ferment sucrose and lactose. However, these isolates had showed Indole and Voges-Proskauer test negative, Methyl-Red test positive. All of these isolates were subjected to rapid plate agglutination test with polyvalent "O" (Poly 'O') and polyvalent "H" (poly 'H') antisera where positive agglutination were observed. They were highly sensitive to ciprofloxacin, spiramycin and gentamycin; moderately sensitive to oxytetracyline, streptomycin and amoxicillin; less sensitive to sulphamethoxazole and resistant to penicillin-G. Based on the present findings, it may be concluded that the investigated Salmonella spp. from goats might be S. typhimurium, S. enteritidis, S. brandenburg, S. salford, S. newbrunswick, S. newport or S. dublin. Further study will be needed, therefore it requires further characterization using other serological and molecular techniques.

Statement of Problem: Titanium has many advantages of high biocompatibility, physical porperties, low-weight, low price and radiolucency, but it is incompatible with conventional dental porcelain due to titanium's oxidative nature. Many previous studies have shown that they used the method of sandblast surface treatment prior to porcelain application, the researchs are processing about the method of acid etching or surface coating. Purpose: The purpose of this research is to study the effect on bond strength between titanium and porcelain when using macro-surface treatment and micro-surface treatment and macro and micro surface treatment. Material and method: In this study, we evaluated the bond strength by using 3-point bending test based on ISO 9693 after classified 7 groups-group P : polished with #1200 grit SiC paper, group SS : sandblasted with $50{\mu}m$ aluminum oxides, group LS : sandblasted with $250{\mu}m$ alumium oxides, group HC : treated with 10% hydrochloric acid, group NF : treated with 17% solution of fluoric acid and nitric acid, group SHC : treated with 10% hydrochloric aicd after sandblsting with $50{\mu}m$ alumium oxides, group SNF treated with 17% solution of fluoric acid and nitric acid. Results : Within the confines of our research, the following results can be deduced. 1. Group SS which was sandblasted with $50{\mu}m$ aluminum oxides showed the highest bond strength of 61.74 MPa and significant differences(P<0.05). The bond strengths with porcelain in groups treated acid etching after sandblasting decreased more preferable than the group treated with sandblasting only. It gives significant differences(P<0.05). 2. After surface treatments, the group treated with sandblasting showed irregular aspect formed many undercuts, in the SEM photographs. The group treated with hydrochloric acid had the sharp serrated surfaces, the group treated with the solution of fluoric acid and nitric acid had the smooth surfaces, the group with sandblasting and hydrochloric acid had irrigular and porous structure, the group with sandblasting and the solution of fluoric acid and nitric acid had crater-like surfaces. But all of the groups treated with acid etching was not found and undercut. Conclusion: In above results, average surface roughness increase, bond strength also increase, but surface topographs influences more greatly on bond strengths.