Earticle

The purpose of this study is to develop a guideline of process capability evaluation and to apply this guideline improving the quality of products, especially in the small and medium enterprises. In this study we deal in the concept of process capability evaluation, the calculation of process capability index, and the application of a case study. Man must compare the state of process with the standards in evaluating of the process capability. Control chart can be used as a yardstick for judgement for the long term period and the distribution shape of histogram for the short term period. Man should regard to the significant figure by the calculation of process capability index.

We develop methods for propagating and analyzing EPCI(Extended Process Capability Index) by using the error type that classifies into accuracy and precision. EPCI developed in this study can be applied to the three combined processes that consist of production, measurement and calibration. Little calibration work discusses while a great deal has been studied about SPC(Statistical Process Contol) and MSA(Measurement System Analysis). EPCI can be decomposed into three indexes such as PPCI(Production Process Capability Index), PPPI(Production Process Performance Index), MPCI(Measurement PCD, and CPCI(Calibration PCI). These indexs based on the type of error classification can be used with various statistical techniques and principles such as SPC control charts, ANOVA(Analysis of Variance), MSA Gage R&R, Additivity-of-Variance, and RSSM(Root Sum of Square Method). As the method proposed is simple, any engineer in charge of SPC. MSA and calibration can use efficientily in industries. Numerical examples are presentsed. We recommed that the indexes can be used in conjunction with evaluation criteria.

Process capability indices are widely used in industries and quality assurance system. When designing the parameter on the multiple quality characteristics, there has been a study for optimization of problems, but there has been few former study on the possible conflicting phenomena in considertion of the correlations among the characteristics. To solve the issue on the optimal design for muliple quality characteristics, the study propose the expected loss function with cross-product terms among the characteristics and derived range of the coefficients of terms. Therefore, the analysis have to be required a multivariate statistical technique. This paper introduces to multivariate capability indices and then selects a multivariate process capability index incorporated both the process variation and the process deviation from target among these indices under the multivariate normal distribution. We propose a new multivariate capability index MCpm using quality loss function instead of the process variation and this index is compared with the proposed indices when quality characteristics are independent and dependent of each other,

It is necessary to deal with the process capability index carefully because it has been developed with certain assumptions. Companies make a decision on processes through the results obtained by using and treating data extracted from the processes. However if they have incorrect or wrong results, they cannot lead to proper outputs but also bring to loss of the competition in quality. Therefore, this study will show a method to analysis Cp (process capability ; CP) and an idea of mass-production on Pp (process performance ; PP) based on the Sigma Estimate which is one of the uncertainty in the process capability index and makes a lot of error. To apply this method, it is essential to understand and to analyze the processes exactly. Especially, it is required to establish the more accurate process capability index that can quickly and properly respond to changes on processes to recognize the small changes on the process which lies in specification in mass production system that the continual monitoring of quality managers is required.

As we understand it, Process Capability indices are intended to provide single-number assessments of ability to meet specification limits on quality characteristics of interest. As a consequence of the varied ways in which PCIs are used, there have been two natural lines of research work: ① studies on the properties of PCIs and their estimators in many different environments; ② construction of new PCIs purporting to have better properties in certain circumstances. The most of existing process capability indices are concerned with the single variable. But, in many cases, a quality characteristic is composed with several factors. In that case, we want to know the integrated process capability of a quality characteristic not those of each factor. In this paper, we proposed a new multivariate system process capability index called MSPCI:SCpsk which is the geometric mean of performance measure Cpsk.'S, and will be used as the criterion to assess multiple response process designs. Numerical illustration is done for SCpsk, Cp(f), Cp, Cpk, Cpm, and Cpsk.

Process capability indices are widely used in industries and quality assurance system. When designing the parameter on the multiple quality characteristics, there has been a study for optimization of problems, but there has been few former study on the possible conflicting phenomena in considertion of the correlations among the characteristics. To solve the issue on the optimal design for multiple quality characteristics, the study propose the expected loss function with cross-product terms among the characteristics and derived range of the coefficients of terms. Therefore, the analysis have to be required a multivariate statistical technique. This paper introduces to multivariate capability indices and then selects a multivariate process capability index incorporated both the process variation and the process deviation from target among these indices under the multivariate normal distribution. We propose a new multivariate capability index MCpm using quality loss function instead of the process variation and this index is compared with the proposed indices when quality characteristics are independent and dependent of each other.

This research presents an implementation strategy of Process Capability Index ( PCI) according to the types of process characteristics. The types of process feature are classified as four perspectives of variation range, time period, error position, and process stage. The paper examines short-term or long-term PCI, within or between variation, position of precision or accuracy, and inclusion of measurement or calibration stage. Moreover, the study proposes normality test of unilateral PCI.

The control chart is widely used tool for monitoring of the process. This paper deals with an interpretation of the process capability index(PCI) and process performance index(PPI) when the control chart is used for monitoring of the process. The main difference between the PCI and PPI is how we did estimate the process deviation. The PCI uses the within process variation and the PPI uses the total process variation, which is conceptually defined as sum of between process variation and within process variation. Easy interpretations of the PCI and PPI for field engineers are described. And some new approaches to interpretation of the process capability and performance index may be useful in early stabilization of new process.

Process capability index is used to determine whether a production process is capable of producing items within a specified tolerance. The index $C_{pmk}$ is the third generation process capability index. This index is more powerful than two useful indices $C_p$ and $C_{pk}$. Whether a process distribution is clearly normal or nonnormal, there may be some questions as to which any process index is valid or should even be calculated. As far as we know, yet there is no result for statistical inference with process capability index $C_{pmk}$. However, asymptotic method and bootstrap could be studied for good statistical inference. In this paper, we propose various bootstrap confidence limits for our process capability Index $C_{pmk}$. First, we derive bootstrap asymptotic distribution of plug-in estimator $C_{pmk}$ of our capability index $C_{pmk}$. And then we construct various bootstrap confidence limits of our capability index $C_{pmk}$ for more useful process capability analysis.

A family of some capability indices { $C_{p}$(.alpha.,.beta.); .alpha..geq.0, .beta..geq.0}, containing the indices $C_{p}$, $C_{{pk}}$, $C_{{pm}}$, and $C_{{pmk}}$, has been defined by Vannman(1993) for the case of two-sided specification interval. By varying the parameters of the family various capability indices with suitable properties are obtained. We derive tha asymptotic distribution of the family { $C_{p}$(.alpha.,.beta.); .alpha..geq.0,.beta..geq.0} under general proper conditions. It is also shown that the bootstrap approximation to the distribution of the estimator $C_{p}$(.alpha., .beta.) is vaild for almost all sample sequences. These asymptotic distributions would be used in constructing some bootstrap confidence intervals.tervals.

The process capability indices have been widely used to measure process capability and performance. In this paper, we proposed a new process capability index which is based on an actual dollar loss by defects. The new index is similar to the Taguchi's loss function and fully incorporates the distribution of quality attribute in a process. The strength of the index is to apply itself to non-normal or asymmetric distributions. Numerical examples were presented to show superiority of the new index against $C_p$, $C_{pk}$, and $C_{pm}$ which are the most widely used process capability indices.

This study proposes a modified definition about $C_{pk}$ based on median as the centering parameter in order to more easily control the process since the mean does not represent any quantile of the asymmetric process distribution. Then we consider an estimate and derive the asymptotic normality for the estimate of the modified $C_{pk}$. In addition, we provide an example with asymmetric distributions and discuss the estimation for the limiting variance that are followed by some concluding remarks.

In this paper, we provide a new proof to correct the asymptotic normality for the estimate $\hat{C}_{pmk}\;of\;C_{pmk}$, which is one of the well-known definitions of the process capability index. Also we comment briefly on the correction of the limiting distribution for $\hat{C}_{pmk}$ and on the use of re-sampling methods for the inference of $C_{pmk}$. Finally we discuss the concept of asymptotic unbiasedness.

Process Capability Indexes(PCI) are used as the measure for evaluation of process capability analysis and is the statistical method for efficient process control. The fourth generation $PCI(C_{psk})$ is constructed from $C_{pmk}$ by introducing the factor $\mid\mu-T\mid$ in the numerator as an extra penalty for the departure of the process mean from the preassigned target value T And Process Incapability Indexes(PII) are presented by inversing PCI and include the information of PCI. This paper introduces the PII $C_{ss}^*$ provide manager with various information of process and include Gage R&R. PII $C_{ss}^*$ is presented by inversing PCI $C_{psk}$ and include the information of PCI $C_{psk}$.

Purpose: The purpose of this study is to develop the statistical test for process capability index $C_p$ based on mixture normal process. Methods: This study uses Bootstrap method to calculate the approximate P-value for various simulation conditions under mixture normal process. Results: This study indicates that our proposed method is effective way to test for process capability index $C_p$ based on mixture normal process. Conclusion: This study finds out that statistical test for process capability index $C_p$ based on mixture normal process is useful for real application.

Purpose: The purpose of this study is to propose a system predicting whether an electricity distribution system is abnormal by analyzing the temperature of the deteriorated system. Traditional electricity distribution system abnormality diagnosis was mainly limited to post-inspection. This research presents a remote monitoring system for detecting thermal images of the deteriorated electricity distribution system efficiently hereby providing safe and efficient abnormal diagnosis to electricians. Methods: In this study, an object detection algorithm (YOLOv5) is performed using 16,866 thermal images of electricity distribution systems provided by KEPCO(Korea Electric Power Corporation). Abnormality/Normality of the extracted system images from the algorithm are classified via the limit temperature. Each classification model, Random Forest, Support Vector Machine, XGBOOST is performed to explore 463,053 temperature datasets. The process capability index is employed to indicate the quality of the electricity distribution system. Results: This research performs case study with transformers representing the electricity distribution systems. The case study shows the following states: accuracy 100%, precision 100%, recall 100%, F1-score 100%. Also the case study shows the process capability index of the transformers with the following states: steady state 99.47%, caution state 0.16%, and risk state 0.37%. Conclusion: The sum of caution and risk state is 0.53%, which is higher than the actual failure rate. Also most transformer abnormalities can be detected through this monitoring system.

In the industrial fields, the process capability index has been using to evaluate the variation of quality in the process. The traditional process capability indices such as $C_p$, $C_{pk}$, $C_{pm}$ and $C^+_{pm}$ have been applied in the industrial fields. These traditional process capability indices are mainly applied in the univariate analysis. However, the main streams in the recent industry are the multivariate manufacturing process and the multiple quality characteristics are corrected each other. Therefore, the multivariate statistical method should be used in the process capability analysis. The multivariate process indices need to be enhanced with more useful information and extensive application in the recent industrial fields. Hence, the purpose of the study is to develop a more effective multivariate process index ($MC_{pI}$) using the multivariate inverted normal loss function. The multivariate inverted normal loss function has the flexibility for the any type of the symmetrical and asymmetrical loss functions as well as the economic information. Especially, the proposed modeling method for the multivariate inverted normal loss function (MINLF) and the expected loss from MINLF in this paper can be applied to the any type of the symmetrical and asymmetrical loss functions. And this modeling method can be easily expanded from a bivariate case to a multivariate case.

This study is concerned about the process capability index in single process. Previous process capability indices have been developed for the consistency with the nonconforming rate due to the process target value and skewness. These indices calculate the process capability by measuring one spot in an item. But the only one datum in an item reduces the representativeness of the item. In addition to the lack of representativeness, there are many cases that the uniformity of the item such as flatness of panel is absolutely important. In these cases, we have to measure several spots in an item. Also the nonconforming judgment to an item is mainly due to the range not due to the standard variation or the shift from the specifications. To imply the uniformity concept to the process capability index, we should consider only the variation in an item. It is the within subgroup variation. When the universe is composed of several subgroups, the sample standard deviation is the sum of the within subgroup variation and the between subgroup variation. So the range R which represents only the within subgroup variation is the much better measure than that of the sample standard deviation. In general, a subgroup contains a couple of individual items. But in our cases, a subgroup is an item and R is the difference between the maximum and the minimum among the measured data in an item. Even though our object is a single process index, causing by the subgroups, its analytic structure looks like a system process capability index. In this paper we propose a new process capability index considering the representativeness and uniformity.

The traditional process capability indices Cp, Cpk, Cpm, $Cpm^+$ have been used to characterize process performance on the basis of univariate quality characteristics. Cp, Cpk consider the process variation, Cpm considers both the process variation and the process deviation from target and Cpm+ considers economic loss for the process deviation from target. In manufacturing industry, there is growing interest in quantitative measures of process variation under multivariate duality characteristics. The multivariate process capability index incorporates both the process variation and the process deviation from target or considers expected loss caused by the process deviation from target. This paper proposes multivariate capability index based on the expected loss derived from multivariate normal distribution.

Process capability implies the qualitative capability of a process, and it is necessary to specify the process capability by quantification and to evaluate the level with the specified standardizaion. But the process capability index is currently used to evaluate the performance of quality control activity. without considering the characteristics of process structure or the economy of management. Here the researcher would like to redefine process capability and emphasize its index may be used as the measure of managerial assessment and the objective of process quality control in full consideration of the economic aspects of process characteristics. Too little or too much process capability causes a loss of or excess. The proper economic level of process capability varies to each process. The procedure of taking the optimum process capability index is derived from the expected profit function, whereas each method is studied in cases of normal process with one-sided specification and two-sided specification. In addition, the process capability index is presented as a method of quality assurance. And an example is exhibited on wrapping process of 'A' company. The results of this study are summarized at follows. First, though the norminalization of the process capability index is possible by the existing methods, the optimum process capability index can vary to the situation of each process. So, the optimum process capability index which is suggested in this dissertation should be used as the standard to assess process capability. Second, the process capability index can take its effect not just in indicating quality control or managerial records but also in the management of high qualify assurance.