Earticle

A bolt-fastening method was invented for connecting prefabricated modular structures with a purpose of reducing production cost and enhancing delivery efficiency of precast structures by eliminating welding parts. In order to remove welded connections, a drawing part and a bending part were designed and bolted together to easily generate a long support structure. The bolt-fastened structure had a plate deflection of similar magnitude to that of the welded structure, and weighed about 2.5% less. The heat supplied inside the structure for concrete curing had a negligible effect on the deflection of the structure. Since the unit module is only 640 mm long, and welding is eliminated from production to export local assembly, and the long structure is completed only by fastening, significant reductions in shipping cost and local labor cost are expected.

이 연구의 목적은 프리캐스트 부재의 새롭게 고안한 전단저항 연결체의 구조성능을 평가하는데 있다. 프리캐스트 세그먼트 구조물의 설계와 시공시에 전단저항 연결체와 같은 접합부는 특별한 주의가 요구된다. 개발한 전단저항 연결체의 상세와 성능을 평가하기 위하여 실험 및 해석적 연구를 수행하였다. 사용된 프로그램은 철근콘크리트 구조물의 해석을 위한 RCAHEST이다. 이 연구에서 사용된 접합요소는 세그먼트 접합부의 비탄성거동을 정확하게 예측할 수 있다. 추후 전단저항 연결체를 갖는 프리캐스트 세그먼트 PSC 교각의 실험을 수행하여 구조거동과 내진성능을 파악할 것이다.

The purpose of this study is to critically evaluate the structural performance of an innovative new shear resistance connecting structure of precast member. Joints such as shear resistance connecting structure require special attention when designing and constructing precast segmental structures. An experimental and analytical study was conducted to quantify performance measures and examine one aspect of detailing for developed shear resistance connecting structure. A computer program, named RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology), for the analysis of reinforced concrete structures was used. A joint element is used to predict the inelastic behavior of the joints between segmental members. Future work by the authors will do a model test of precast segmental prestressed concrete bridge columns with this shear resistance connecting structure, and examined both the structural behavior and seismic performance.

이 연구의 목적은 전단저항 연결체를 갖는 프리캐스트 세그먼트 교각의 성능을 파악하는데 있다. 프리캐스트 교각 시스템은 현장에서의 작업을 줄이고 공사기간의 단축을 가져올 수 있다. 전단저항 연결체를 갖는 프리캐스트 세그먼트 교각 실험체에 일정 축하중 하에서 횡방향 반복하중을 가하는 준정적 실험을 수행하였다. 사용된 프로그램은 철근콘크리트 구조물의 해석을 위한 RCAHEST이다. 사용된 부착 또는 비부착 텐던요소는 유한요소법에 근거하며 프리스트레스트 콘크리트 부재의 콘크리트와 텐던의 상호작용을 구현할 수 있다. 새롭게 수정된 접합요소는 세그먼트 접합부의 비탄성거동을 예측할 수 있다. 제안된 해석기법은 조사된 실험체에 대하여 하중단계에 따라 성능을 비교적 정확하게 예측하였다.

The purpose of this study was to investigate the performance of precast concrete segmental bridge columns with shear resistance connecting structure. The system can reduce work at a construction site and makes construction periods shorter. A model of precast concrete segmental bridge columns with shear resistance connecting structure was tested under a constant axial load and a cyclically reversed horizontal load. A computer program, RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology), for the analysis of reinforced concrete structures was used. An bonded or unbonded tendon element based on the finite element method, that can represent the interaction between tendon and concrete of prestressed concrete member, is used. A joint element is newly modified to predict the inelastic behaviors of segmental joints. The proposed numerical method gives a realistic prediction of performance throughout the loading cycles for several test specimens investigated.

This study was developed high-quality a large size precast channel structure using polymer concrete to improve quality of the product as well as to enhance construction quality. Practical precast channel structure design and manufacture procedure for the high polymer concrete were described in this paper. Precast PC represent the fastest growing segment of the polymer concrete industry. The fast curing, high strength, and low impermeability permit thin section and rapid reuse of moulds. Precast channel structure will carry out structural experiment and analysis.

This study was developed high-quality a large size precast channel structure using polymer concrete to improve quality of the product as well as to enhance construction quality. Precast PC represent the fastest growing segment of the polymer concrete industry. The fast curing, high strength, and low impermeability permit thin section and rapid reuse of moulds. Developed precast channel structure will be structural experiment and analysis. Also, through an example to construct will be develop the most suitable section survey and make practicable.

최근 개착식 터널공법으로 널리 사용되고 있는 프리캐스트 라이닝 아치 구조물에 대하여 현장 계측과 수치해석 결과를 비교하여 3힌지 프리캐스트 아치 구조물의 거동을 분석하였다. 현장 계측결과, 천단부에서 가장 큰 연직변위가 측정되었으며 초기에는 상방향으로 변위가 발생하다가 뒤채움 흙이 천단부보다 높아지면서 하방향으로 변위가 발생하였다. 천단부는 최종적으로 원 위치로부터 상방향 19 mm에서 변위가 수렴하였다. 측벽부 최대 수평변위 지점에서의 수평변위는 아치상단까지 뒤채움시 터널 내측으로 발생하여 두 지점간의 수평거리가 줄어들다가, 상부 성토가 진행될수록 수평변위는 감소하여 원래 위치로 이동하였다. 프리캐스트 아치구조물에 대한 변위 분석결과, 지반-구조물의 상호작용을 잘 관찰할 수 있었으며 따라서 기존의 강성구조물과 비교하여 경제적인 설계가 가능할 것으로 기대된다. Duncan 모델을 사용한 유한요소 해석결과를 현장 변위 계측값과 변위 형상 등과 비교하면 유사한 결과를 나타내었다. 수치해석 결과에 의한 측벽부의 수평토압계수는 터널 좌측부는 0.4, 우측부는 0.7에서 수렴하여, 편토압이 발생하는 현장상황 및 현장 변위 계측 결과와도 일치하였다.

The behavior of the 3 hinged precast arch structure was investigated by comparing field measurements with numerical analyses performed for precast lining arch structures, which are widely used for the open-cut tunnel. According to the field measurements, the maximum vertical displacement occurred at the crown with upward displacements during the backfilling up to the crown of the arch and downward displacements at the backfill height above the crown. The final crown displacement was 19 mm upward from the original position. The horizontal displacement at the sidewall, which had a maximum horizontal displacement, occurred inward of the arch when compacting the backfill up to the crown and returned to the original position after completing the backfill construction. According to the analysis of displacement measurements, economical design is expected to be possible for precast arch structures compared to rigid concrete structures due to ground-structure interactions. Duncan model gave good results for the estimation of displacements and deformed shape of the tunnel according to the numerical analyses comparing with field measurements. The earth pressure coefficients calculated from the numerical analyses were 0.4 and 0.7 for the left and the right side of the tunnel respectively, which are agreed well with the eccentric load acting on the tunnel due to topographical condition and actual field measurements.

The precast-buckling restrained braces(PC-BRB) reinforced with engineering plastics that can compensate for the disadvantages in the manufacturing process of the existing buckling restrained brace. In this study, to examine the applicability of PC-BRB to actual structures, example structures similar to school facilities were selected and the reinforcement effect was analyzed analytically according to the damping design procedure of PC-BRB. Load-displacement curve through the incremental loading test appeared similar to the bilinear curve. Applying test result, Analytical model of PC-BRB model was constructed and applied to the example structure. As a result of the analysis, the PC-BRB showed stable hysteresis behavior without lowering the strength, and the inter story drift ratio and the shear force were reduced due to the damping effect. In addition, the reduction ratio of the shear force was similar to the reduction ratio assumed when designing the damping device.

해상풍력발전의 건설이 여러 가지 환경 및 가설공법 등의 설치환경 등의 원인에 의하여 건설지점이 천해에서 심해로 이동하는 경향을 나타내고 있다. 이러한 경향 속에 해상풍력발전 지지구조물의 심해화에 따른 지지구조물에 대한 연구는 중요성이 더욱 증대될 것으로 판단된다. 본 연구에서는 기존의 Jacket 구조물에 대하여 Precast Concrete Block 및 Suction pile을 적용한 Jacket 구조물을 제안하고 이에 대하여 구조해석 및 안전성 평가를 실시하였다. 또한 제안된 구조물에 동조액체감쇠기를 적용하여 구조물 진동성능 향상을 도모하고자 하였다. 연구결과, 제안된 신형식 Jacket 구조물은 충분한 안전성을 가지고 있는 것으로 평가되었으며, 동조액체감쇠기를 적용하였을 경우, 약 5%의 진동저감 효과가 있는 것으로 검토되었다.

Recently, construction sites of offshore wind power tend to move from shallow water to deep water. From this tendency, the research on the support structure of offshore wind power in deep water will be a key issue. In this study, precast concrete block and suction pile are applied to existing jacket structure. In order to reduce the vibration of this structure, the tuned liquid damper is also applied in the precast concrete block. The applicability of the suggested jacket structure is evaluated by finite element analysis. And the vibration tends to decrease about 5%, when the tuned liquid damper is applied.

본연구는 실물크기의 프리캐스트 콘크리트 판구조물의 부분구조체를 모형화하여 실험한 결과를 분석한 것이다. 구조물의 역학적 특성과 파괴성상을 파악하기 위한 구조실험은 실물크기의 구조물과 부재로써 실시하는 것이 가장 좋은 방법이지만, 이것은 치수가 크므로 공간적으로 제한을 받고 많은 시간과 비용을 필요로 하기 때문에 모형실험을 이용하게 된다. 이러한 모형실험을 최소한의 오차범위내에서 원형실험과 같은 재현하고 예측하도록 실험을 준비하는 데에는 상사법칙이 필요하게 된다. 모형은 무엇보다도 원형과의 응력-변형도 관계 등 구성재료에 대한 상사요구조건을 만족시키는 것이 중요하지만, 본 연구의 대상은 1/3축척으로써 기하학적인 요소와 사용재료에 대한 강도의 상사성만을 고려한 모형이다. 본 연구에서는 이러한 모형구조물의 거동을 원형실험결과와 비교하여 상사성 확보의 문제와 가능성을 조사하였다.

Four types of horizontal joint were tested to investigate the difference with regards to the compressive behavior and strength. These include wedge-type joints (i)with and (ii)without transverse reinforcement against splitting failure of the panel concrete, and wedge-type joints (iii)with different widths of joint concrete (6cm vs 8cm) and (iv)closed platform joint. It was shown that the compressive strength of wedge-type joint is about 10% higher than that of closed-type (platform) joint. But the effect of transverse reinforcement and joint concrete widths on the strength of the joints turned out be negligible. Also, the moduli of elasticity in panel and joint are compared and the equivalent moduli of the whole wall are derived.

본 연구의 목적은 프리캐스트 콘크리트(PC) 대형판 구조물의 축소모델 제작 및 실험기법에 관한 정보을 제공하는 것이다. 적용된 축소율은 1/5이며, 4가지의 실험이 수행되었다. : 모델 콘크리트와 모델 철근의 재료실험, 수평접합부의 압축실험, 수직접합부의 전단실험, 2층 부분구조물의 정적 주기 실험, 이들 실험결과를 기초로 다음의 결론을 도출하였다. : (1)모델 콘크리트는 일반적으로 예상보다 압축강도가 크게 나타났다. (2)모델 철근은 진공관을 사용하지 않고 열처리를 할 경우 연성의 저하를 보인다. (3)수평접합부와 수직접합부의 파괴모드는 실물크기와 모델이 거의 유사하였으나. 모델의 강도는 상사법칙에 의한 요구강도보다 크게 나타났다. (4) 실물크기와 유사하게 모델철근의 연성과 모델 콘크리트의 압축강도를 확보할 수 있다면, 1/5모델 부분구조물의 이력거동은 실물크리와 매우 근접되게 나타낼 수 있다.

The objective of this study is to provide the information on the manufacturing and exper- , ructures. imental techniques of small scale modeling of precast concrete(P.C.) large panel :-t The ad~~pted scale was one-fifth. 4 types of experiments were performed : nlaterial tests for model concrete and model reinforcement, compressive test of horizontal joint, shear test of vertical joint and cyclic static test of 2-story subassemblage structure. Based on the experimental results, the following conclusions are drawn : i 1) Model concrete had in general larger compressive strength than expected. (2) Model reinforcement showed less ductility if the annealing processes were performed without using vaccuum tube. 131 Failure niotles of horizontal and vertical joints were almost same for both prototype and model. But the strength of model appears to be higher than required by similitude law. (41 Hysteretic behavior of 1 /T, scale subassemblage model can be made quite similar to that of prototype if the ductility of model reinforcement and compressive strength of model concrete could be representative of those of prototype.

The objective of this study is to provide the information on the techniques of manufacturing and experiment in small scale modeling of precast concrete(P.C.)large panel structures. The adopted scale was 1/5th 4types of experiments were performed : material tests for model concrete and model reinforcement, compressive test of horizontal joint, shear test of vertical joint and cyclic static test of 2-story subassemblage structure. Based on the experimental results, the following conclusions are drawn: (1)Model concrete may have in general larger compressive strength than expected. (2) Model reinforcement can show less ductility if the annealing processes were performed without using vaccuum tube. (3) Failure modes of horizontal and vertical joints were almost same for both prototype and model. But the strength of model appears to be higher than required by similitude law. (4)Hysteretic behavior of 1/5 scale subassemblage model can be made quite similar to prototype's if the ductility of model reinforcement and compressive strength of model concrete could be representative of those of prototype.

Recently, precast concrete tracks are replacing ballast track for efficient and economic maintenance of track. Precast concrete railroad tracks are manufactured in factory, and transported to railroad construction site for installation. Therefore, quality of precast concrete track itself should be sufficiently good. On the contrary to the convenient manufacturing of precast concrete track, the installation of a precast concrete track requires careful steps. Typically, a precast concrete track is placed on an approximately 15-cm thick lean concrete layer. A mortar is filled between lean concrete layer and precast concrete track to adjust the sloping angle of a precast concrete track for a safe train operation at a curvy section. Then, the use of filled mortarproduces a void underneath a precast concrete track, which is harmful to structural safety of a precast concrete track undercyclic loading. Therefore, it is essential to make sure that there is no void left beneath a precast concrete track after mortar filling. In the continuous resonance method, the amplitude of frequency response measured using an instrumented hammer and an accelerometer is plotted against a pseudo-depth, which is half of the wave velocity divided by frequency. The frequency response functions are measured at consecutive measurement locations, 6-cm interval between measurement points, and then combined together to generate a 2-D plot of frequency response. The sections with strong reflections or large amplitude of frequency response are suspicious areas with internal voids and unfilled areas. The 2-D frequency response plot was efficient in locating problematic sections just by examining the color shade of a visualized plot in 2-D format. Some of the problematic sections were drilled to make a visual inspection of mortar filling. The visual image of interface between mortar and precast concrete track was verified using the validity of the continuous resonance technique adopted in this research.

기존 부설된 자갈도상 궤도를 콘크리트도상 궤도로 개량하기 위해 제안된 사전제작형 현장타설식 궤도는 5m 길이의 패널을 공장에서 사전제작하여 침목하부에 침목부착형 레일받침대를 매립하여 일체화한 궤도구조이다. PIC-T 궤도를 사용하여 열차차단시간 내 급속개량이 가능하며, 협소한 터널구간에서도 적용이 가능하다. 하지만 시공 효율성을 위해 슬래브 구조의 길이가 5m로 짧아 시공연장에 따라 궤도의 불연속 구간이 발생하게 된다. 또한 침목하부에 부착된 레일받침대로 인해 열차운행 시 변위가 발생할 수 있고, 기존 궤도와의 접속부에서도 지지강성의 차이로 동적 불안정성이 발생할 우려가 있다. 본 연구에서는 PIC-T 궤도에 대해 구조해석과 차량-궤도간 상호작용 해석을 수행하여 가설상태 및 콘크리트 타설 완료상태의 변위, 윤중변동율, 레일응력 및 상향력을 검토하여 구조적, 동적 안정성을 확보하였다.

The proposed pre-fabricated on-site installation track, intended to improve existing gravel-bed track to a concrete-bed track, is a unified track structure with 5m panels pre-fabricated in the factory and integrated by embedding rail supports with pedestal attachment underneath the sleepers. It utilizes PIC-T tracks, allowing for rapid improvement within the train blocking time, and is applicable even in narrow tunnel sections. However, for construction efficiency, the short length of the slab structure of 5m may result in discontinuous track segments with the extension of construction. Additionally, concerns arise about potential displacement during train operation due to the rail supports attached to the sleeper base and dynamic instability at the connection points with the existing track due to differences in support stiffness. In this study, structural analysis and interaction analysis between the vehicle and track are conducted for the PIC-T track, ensuring structural and dynamic stability by reviewing displacements, vertical irregularities, rail stresses, and uplift forces in temporary state and completed concrete installation states.

일반 교량에 주로 사용되는 콘크리트 바닥판 시공을 위해서는 동바리, 거푸집 등을 설치하고 철근 배근 후 콘크리트를 타설하는 방법이 사용되어왔다. 그러나 기존 콘크리트 바닥판 시공은 계절 및 기후의 영향을 많이 받는다. 또한 시공과정에서 많은 인력이 요구되고 시공 안전성 확보를 위한 노력이 필요한 실정이다. 이러한 문제점을 극복하기 위하여 최근에 프리캐스트 바닥판을 이용한 교량 시공이 늘어나고 있는 추세이다. 프리캐스트 바닥판은 공장에서 선제작한 후 현장에서 조립하여 시공한다. 따라서 프리캐스트 바닥판 시공은 계절 및 기후의 영향을 최소화 하여 공기를 단축할 수 있고, 공장제작에 따른 양호한 품질도 보장된다. 또한 인력이 적게 요구되면서 시공 안전성도 확보할 수 있다. 그러나 이러한 기존의 프리캐스트 바닥판은 패널의 폭이 좁고 외측 캔틸레버부의 시공 시 별도의 지보공이 필요한 단점을 갖고 있었다. 이러한 단점을 보완하기 위해 장폭 외측 프리캐스트 바닥판이 제안되었다. 장폭 외측 프리캐스트 바닥판은 패널의 폭을 늘려서 장폭의 바닥판을 만들고, 가설구조물을 이용하여 지보공 없이 시공이 가능하게 고안되었다. 본 연구에서는 장폭 외측 프리캐스트 패널 캠버 조정에 사용 될 가설구조의 현장적용을 위하여, 실험 후 유한요소해석을 수행하여 비교 및 검증하였다.

Because the construction type SFRB is completely different in comparison with that of RC apartment the construction and work process, which are currently used, have to be changed. The main purpose of study is to analyze the difficulties of this construction and to apply the technology for other construction area. In this study, it is investigated to the problems of construction for SFRB and the construction method of PC panel fabricated on SFRB in Yongin goosng. Later, it is estimated prefabricated method had an great effect on PC panel System as lower cost and shorter schedule in SFRB. The Precast concrete framed System has many merit than the reinforced concrete structures system at constructability, structural safety and quality, therefore, it will be widely applied at parking structure in the future.

이 연구의 목적은 전단저항 연결체를 갖는 프리캐스트 세그먼트 교각의 지진거동을 파악하는데 있다. 전단저항 연결체를 갖는 프리캐스트 세그먼트 교각 실험체에 일정 축하중 하에서 횡방향 반복하중을 가하는 준정적 실험을 수행하였다. 사용된 프로그램은 철근콘크리트 구조물의 해석을 위한 RCAHEST이다. 이 연구에서는 전단저항 연결체를 갖는 프리캐스트 세그먼트 교각의 지진거동의 파악을 위해 제안한 해석기법을 신뢰성 있는 실험결과와 비교하여 그 타당성을 검증하였다.

The purpose of this study was to investigate the seismic behavior of precast concrete segmental bridge piers with shear resistance connecting structure. A model of precast concrete segmental bridge columns with shear resistance connecting structure was tested under a constant axial load and a cyclically reversed horizontal load. A computer program, RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology), for the analysis of reinforced concrete structures was used. The proposed numerical method for the seismic behavior of precast concrete segmental bridge piers with shear resistance connecting structure is verified by comparison with reliable experimental results.