Earticle

In this study, we studied the method of using general architectural glass instead of using the existing acrylic material for high luminance flat lighting. The flat panel lighting used the side illumination method to increase the ease of installation and aesthetic satisfaction. In general, glass has an amorphous structure with a lower angle of refraction than acrylic, so it is not suitable for use in flat panel lighting as a light guide, but in this study, the role of light distribution characteristics and diffusion patterns in the case of using such a glass light guide. Quantitative simulations were conducted to confirm new possibilities. In the simulation, the backlight estimation method was used, and about 10,000,000 rays were placed within a unit area in order to obtain a result similar to the real thing. As a result of the simulation, the geometry of the diffusion pattern could be specified, and the value of the geometry could be quantified using the ratio of the diameter and height of the pattern. As a result of the calculation, it was found that the maximum amount of light was generated around 75 degrees by quantitatively calculating the ratio and the outgoing light angle at which the maximum value of the outgoing light occurred between 05 and 1.0. As a result of these studies, it was confirmed that it is possible to use ordinary glass at the same time as a transparent window and light-emitting lighting at night.