Earticle

Polyvinylchloride(PVC)는 1838년 Regnault에 의해 처음으로 합성된 고분자로 1920년대 후반부터 섬유로 이용하기 위한 많은 연구가 시도되었으나, 상업적 규모로 제조되기 시작한 것은 1942년경부터였다[l]. 현재, PVC는 건축자재용 파이프, 필름 등의 포장재, 가구 및 수송자재, 자동차 내장재 등의 다양한 용도로 사용되어지고 있으나, 다른 폴리머에 비해 열안정성이 낮아 분해시 HCl 외에도 benzene, naphthalene, toluene과 다른 alkylated benzene이 방출되어 유독성과 금형 및 기기의 부식에 있어서 문제가 되고 있다[2]. (중략)

다층구조 고분자 재료의 비결정성 영역에서의 파괴 역학 변형과정을 통하여 ductile 및 brittle층을 동시에 함유하는 다층 구조 가공물을 이용하여 단층 구조물과의 물성을 비교, 조사하였다. 그 결과 거의 유사한 유리 전이온도($T_g$) 및 동일한 dimension에서 다층 구조물의 충격강도가 단일층 구조물보다 현격히 높게 나타났으며, toughness는 약 2배 이상 향상됨을 알 수 있었다. 이것은 ductile층과 brittle층의 두께 비에는 임계값이 있으며, 그 이하에서는 brittle한 재료이더라도 ductile하게 나타날 수 있다는 toughening 원리가 본 실험의 측정 속도 영역 및 온도 범위에서 적용되고 있음을 의미한다. 또한 고속 균열이 진행하는 경우의 운동 응력(kinetic stress wave) 효과를 해석하기 위하여 충격파동 중첩의 원리(superposition principle of impact pulse)를 도입하였다. 그 결과 다층 구조물의 최종 toughness 향상은 ductile/brittle 비율의 최적설계에 있음을 알 수 있었다.

A multilayer-structure material containing ductile and brittle layer simultaneously was examined and compared with a single layer material using fracture mechanical properties. We found that impact strength of multilayer structure material was considerably higher than single layer's and toughness was enhanced by about two times or higher in similar glass transition temperature($T_g$) region and the same dimension. The superposition principle of impact pulse was used for interpretation of kinetic stress wave as a high-velocity crack proceeds in the plastic. It was understood that the optimum condition of ductile/brittle thickness ratio could be designed in the final toughness enhancement of multilayer.

본 연구에서는 PVC졸 실란트에 요구되는 접착성 개선제에 대한 연구의 일환으로 에폭시가 2개(epoxy A)인 것과 4개인 것(epoxy B)을 각각 첨가하였을 때 PVC졸 실란트의 제반물성에 미치는 영향을 연구하였다. PVC졸은 디옥틸프탈레이트(DOP)로 PVC를 가소화시켜 제조된 것이다. 에폭시 수지 A의 경우는 에폭시 수지 함량이 증가할수록 PVC졸 실란트의 점도가 감소하였고, 첨가제 $CaCO_3$가 첨가된 에폭시 PVC졸 실란트의 점도는 에폭시 수지 종류에 관계없이 $CaCO_3$ 함량이 증가할수록 점도가 증가했다. $45^{\circ}C$ 열 수조상에서 점도 변화는 에폭시 수지 종류 또는 함량에 관계없이 점도가 감소하였는데 이는 에폭시가 PVC졸 실란트에 안정제의 역할을 한 것으로 판단되었고, $CaCO_3$가 함유된 경우는 그 함량이 증가할수록 점도가 증가한 것은 충진효과로 판단되었다. 에폭시가 첨가된 PVC졸 실란트의 열적 안정성은 다소 개선되었다. 인장 강도는 에폭시 수지 A의 함량이 낮은 경우는 인장 강도 및 신율이 증가하고, 높은 함량에서는 오히려 감소했다. 에폭시 수지 B의 경우는 에폭시 함량이 증가할수록 인장 강도와 신율은 증가하는 현상이 보였다. 충진제 함량이 많을수록 충진제 함량이 적은 PVC졸보다도 인장 강도는 낮은 현상을 보였다. 전기적 특성에서는 tan ${\delta}$의 값이 0.1정도($0.1{\pm}0.04$)이고 비유전율 ${\epsilon}_r$ 값은 0.5정도($0.5{\pm}0.04$)이므로 좋은 절연체로 판단되었다.

In this work, the effects of the addition of epoxy on the properties of PVC-sol sealants were investigated. PVC-sol was plasticized with dioctyl phthalates(DOP). Two kinds of epoxy resins having different epoxy equivalent weight (E.E.W.) were used. It was found that the properties of the PVC-sol sealants were significantly affected by the contents and types of the added epoxy resins. The viscosity behaviors of the epoxy-modified sealants, in the case of epoxy A addition, the viscosity was decreased with increasing the epoxy contents, but In the case of $CaCO_3$ addition, the viscosity was increased with increasing the $CaCO_3$ contents. The viscosity of epoxy modified sealants aged at $45^{\circ}C$ waterbath was decreased with increasing epoxy contents, since the epoxy acted on the sealants as a stabilizer. The thermal stability of the PVC-sol sealants was slightly improved by adding epoxy. The tensile strength and elongation of sealants modified with epoxy A(two functionalities of epoxy) were increased with increasing the epoxy contents up to a certain epoxy contents but was decreased with further increasing the epoxy contents. In the case of $CaCO_3$ addition, the tensile strength of sealants were decreased with increasing the $CaCO_3$ contents. In view of the electrical properties, such as tan ${\delta}$($0.1{\pm}0.04$) and ${\epsilon}_r$($0.5{\pm}0.04$), it was found that the epoxy modified sealants were as good as insulators.

폴리아미드 수지가 첨가된 PVC졸 실란트의 유변학적 물성에 대해 연구하였다. PVC졸은 디옥틸프탈레이트로 PVC를 가소화시켜 제조된 것이다. 아민가가 달라 점도가 다른 두 종류의 폴리아미드를 사용하였는데 PVC졸의 점도, 틱소트로피 및 비중에 미치는 폴리아미드 수지 종류와 함량의 영향을 고찰하였다. 폴리아미드가 첨가된 PVC졸 실란트의 점도는 폴리아미드의 종류에 관계없이 시간에 따라 증가되었으나 폴리아미드 함량의 영향에 관해서는 아민가가 낮은 폴리아미드 수지 A가 첨가된 PVC졸 실란트의 점도는 폴리아미드 A함량에 따라 증가되고, 반면 아민가가 높은 폴리아미드B가 첨가된 PVC졸 실란트의 점도는 폴리아미드 B함량에 따라 감소되었다. 폴리아미드가 첨가된 PVC졸 실란트의 틱소트로피는 폴리아미드의 종류에 관계없이 그 함량에 따라 다른 거동을 보였다. $45^{\circ}C$의 수조에서 숙성한 후의 폴리아미드가 첨가된 PVC졸 실란트의 점도거동과 충진제인 $CaCO_3$ 함량의 영향도 고찰하였다.

Rheological properties of polyamide-modified poly(vinyl choride) (PVC)-sol sealants were investigated. PVC-sol was prepared by plasticization with dioctyl phthalate(DOP). Two kinds of polyamide rosins having different amino values and thus different viscosities were compared. The effects of the polyamide types and contents on the viscosities, thixotropic indices, and specific gravities of the PVC-sol were discussed. It was found that viscosities of the PVC-sol sealants were significantly affected by the types of the added polyamide resins, and the thixotropic index of the polyamide-modified PVC-sol sealant was observed to be dependent on the contents(not on the types of the polyamides). The viscosity behaviors of the polyamide-modified PVC-sol sealants aged at $45^{\circ}C$ and the effect of the addition of $CaCO_3$ were also discussed.

In our research, we will extract diagnostic parameters by LPC method and wavelet transform. Then, we will design artificial neural network which is based on RBF that can express input features in terms of fuzzy. Because PVC(Premature Ventricular Contraction) has possibility to cause heart attack, the detection of PVC is a very significant problem. To deal with this problem, LPC method which gives different coefficients or different morphologies and wavelet transform which has superior localization nature of time-frequency, are used to extract effective parameters or classification of normal and PVC. Because RBF network can allocate an input feature to the membership degree of each category, total system will be more flexible.

Electrical conductive PVC and HDPE composites were prepared by melt compounding method with electrical conductive carbon black. The electrical and mechanical properties of carbon black composites were affected by the particle size, surface area, density, aggregation morphology and dispersion state of carbon black, According to the carbon black contents, the composites have shown the behaviors of insulator, semiconductor and conductor. The percolation threshold of the carbon black composite was examined. From the temperature dependence of conductivity for the composites, we found that Carbon Black-PVC composites were very stable and reproducible to the temperature changes. Carbon Slack-HDPE composites have shown a PTC(positive temperature coefficient of resistively) effect which has a sudden resistively increase by thermal expansion of polymer at melting region. To prevent a NTC(negative temperature coefficient of resistively) effect and improve reproducibility of conductivity, the chemical crosslinking was accomplished.

Weight and elongation changes of IV and HIV insulations were measured simultaneously at several given temperature of $80^{\circ}C$, $90^{\circ}C$ and $100^{\circ}C$. And the lifetime was predicted using the Arrhenius model. Based on the initial weight values, a 50% elongation reduction was seen at 6.96% for the IV insulation and 10.29% for the HIV insulation. The activation energy from the slope of the lifetime regression equation was calculated as 92.895 kJ/mol(0.9632 eV) for the IV insulation and 95.213 kJ/mol(0.9873 eV) for the HIV insulation. Also, the expected lifetime at the operating temperature of $30^{\circ}C$ to $90^{\circ}C$ is 2.02 to 94.32 years, and longer lifetime was predicted on HIV insulated wires than on IV insulated wires. As a result, it was found that the thermal characteristics of the HIV insulated wires were about 12.44% better than those of IV insulated wires under the same conditions of use.

Removal characteristics of Cu(II) ions by solid-phase extractant immobilized D2EHPA and TBP in PVC were investigated. Cu(II) ion concentrations in the solution and removal capacity of Cu(II) ion according to operation time were compared. The lower the initial concentration of Cu(II) ion in aqueous solution was, the removal capacity of Cu(II) ion by solid-phase extractant was increased relatively. The bigger the initial concentration of Cu(II) ion was, the removal capacity of Cu(II) ion was increased relatively. The pseudo-second-order kinetics according to operation time was showed more satisfying results than the pseudo-first-order kinetics for the removal velocity of Cu(II) ion. The removal capacity of Cu(II) ion was 0.025 mg/g in aqueous solution of pH 2, but the removal capacity of Cu(II) ion was increased to 0.33 mg/g mg/g in aqueous solution of pH 4 according to increasing pH.

범용성 고분자인 폴리염화비닐(PVC)의 용매에 대한 용해도 차이를 이용하여 미세다공성 구조의 표면을 갖는 초소수성 박막을 제조하고 박막의 형상에 따른 표면 특성을 분석하였다. 용매로 테트라하이드로퓨란과 비용매인 프로판올로 구성된 PVC 용액을 딥코팅으로 물과의 접촉각이 $150^{\circ}$ 이상인 초소수성 PVC 박막을 얻었다. PVC 박막 제조과정의 표면 건조공정에서 온도가 증가는 표면 거칠기를 상대적으로 감소시켜 표면의 소수성 특성 저하를 가져왔다. PVC 용액에 비용매인 프로판올의 양을 증가시키면 코팅 박막의 표면 거칠기가 균일해지고 접촉각을 증가시키는 효과를 보였다. 초소수성의 PVC 박막 표면을 산소 플라즈마 처리하면 노출시간에 따라 친수성으로 표면특성이 변환됨을 확인하였다.

Polyvinylchloride (PVC) thin films having a microporous structure could be prepared by using the solubility difference in solvents. PVC thin film with a water contact angle of $150^{\circ}$ or more was obtained from the PVC solution consisting of the mixture of tetrahydrofuran as a solvent and propanol as a non-solvent. In the drying process of dip-coated PVC film, the increase of drying temperature reduced the tendency of roughened surface, which led the decrease of surface hydrophobicity. As the addition of propanol in the solution with 1 wt% PVC increased, the uniformity of surface roughness was improved. In the case of oxygen plasma treatments, even though the surface structure of PVC thin film was not notably changed, the surface property of the film was changed from the super-hydrophobicity to hydrophilicity as a function of the plasma exposing time.

본 연구는 폴리에스터 가소제를 이용한 내제트유성 PVC계 실란트 개발에 관한 것이다. PVC 공중합체에 아디프산 글리콜 폴리에스터 가소제(Songcizer P-3000) 또는 DOP를 배합하여 연료유 함침 전후의 칩입도 변화, 용해도, 흐름성 및 인장 접착 신율을 측정하였다. 연료유 함침 전후 칩입도 변화 및 용해도를 측정한 결과 폴리에스터 가소제의 내제트유성이 DOP 가소제를 사용한 것 보다 작은 것으로 나타났다. PVC 공중합체에 Songcizer P-3000의 배합비를 중량비로 500 phr로 고정하고 접착성 향상제인 DCDP (dicyclopentadiene)계 석유수지를 400 phr까지 배합한 결과 첨가량에 비례하여 접착 신율이 감소하였다. 탄산칼슘은 연료유의 확산을 방지하였고 Songcizer P-3000을 사용한 경우 용해도를 감소시키는 결과를 얻었다.

This work is about the development of jet-fuel resistant PVC sealant using a polyester plasticizer. PVC copolymer was compounded with adipic acid glycol(Songcizer P-3000) or DOP plasticizers. Fuel-immersed and non-immersed penetration, solubility, flow, and elongation by tensile adhesion of PVC compounds were measured. Penetration increase by fuel immersion and solubility of PVC compounds with adipic acid glycol polyester plasticizer were smaller than those of PVC compounds with DOP plasticizer. Elongation by tensile adhesion test of PVC compound containing 500 phr of Songcizer P-3000 decreased proportionally to the content of DCDP (dicyclopentadiene) base petroleum resin adhesion promoter. Calcium carbonate($CaCO_3$) filler inhibited the diffusion of fuel in all the PVC compounds and decreased the solubility of PVC compounds containing Songcizer P-3000.

가발을 만드는데 사용되는 재료는 크게 인모와 합성섬유로 나눌 수 있다. 이중 합성섬유는 인모에 비해 가격이 저렴하고 관리가 쉬우며 동일한 제품을 대량 생산할 수 있다는 장점이 있다. 이러한 장점을 이용한 가발용 합성섬유로는 모다크릴, 나일론, 폴리에스테르 등이 있는데, 근래에는 이들보다 생산이 쉽고 단가가 낮은 PVC 필라멘트의 사용이 증가하는 추세이다. (중략)

A certain amount of MBS rubber was added to improve toughness of PVC which has a strong tendency of being brittle, producing a mixture, PVC/MBS, from which test specimens were prepared. PVC has strong chemical resistance, oil resistance, frame retardancy and high mechanical strength. Also, it is relatively inexpensive to produce, but shows weakness to impact and difficult for processing. MBS, a typical toughening agent for PVC is generally known, when added in a small amount, to improve impact resistance and to minimize difficulties during the processing of the PVC without adversely affecting the positive aspects of the PVC. In this investigation, attempts were made to observe and determine the variations in elastic and damping constants of the PVC depending on the amounts of MBS added to the mixture, PVC/MBS, and also on the thicknesses of the specimens. An acoustic resonance technique was used for the tests in this investigation. It serves as a method to characterize properties of materials set in vibrational motions, which is initiated by low level stresses generated by externally supplied acoustic energy. Substantial variations were observed in the test results with the addition of the MBS to the PVC. Generally, the magnitudes of elastic constants decrease while the damping capacity improves when MBS rubber was added.

The effect of coagulation conditions on the morphology of as-spun PVC fibers from wet-spinning was studied with two different coagulant system ($H_2O$/DMF and $H_2O$/MeOH). The morphology of as-spun fibers spun into $H_2O$/DMF became denser but more unsymmetrical in shape with increasing DMF concentration up to 40%. However, the maximum draw ratio, $DR_{max}$, of such as-spun fibers was too low to produce a PVC fiber successfully. On the other hand, the morphology of as-spun fibers spun into $H_2O$/MeOH changed from circular to kidney bean shape with less voids and their $DR_{max}$ also increased with increasing MeOH concentration. $H_2O$/MeOH=20/80 coagulant bath system was suitable for the production of better quality PVC fiber having a denser circular morphology and a high $DR_{max}$ resulted in stronger tensile strength.

고로와 전로분진(광양제철)을 함유한 PVC복합체 수지의 역학적 성질을 혼합 성분비에 따라 측정하였다. 그 결과 인장강도는 혼합될 때의 고로 분진량이 8.83wt% 일 때 증가했으나 충격강도는 큰 변화를 나타내지 않았다. 이는 PVC와 CaO, SiO, MgO, $A1_2O_3$ 및 금속입자들을 포함한 분진과의 상용성에 따른 결과로 생각된다. 열중량분석(TGA) 결과 $600^{\circ}C$ 이상에서의 잔존량(wt%)은 첨가되는 분진의 량에 비례했으며 시차주사열량계(DSC) 측정 결과 역시 고로분진의 첨가량이 8.83wt% 일때 열적 안정성은 증가했다. X-ray회절 분석 결과는 블렌드 상태와 구조를 나타냈다.

Mechanical properties of PVC[poly(vinylchloride)] composites containing the dust from blast and converter (Kwangyang Iron Co.) were investigated as a function of dust content. Tensile strength is increased, when the blast dust is mixed with PVC to the extent of 8.83wt % and impact strength is not significantly changed. From these results, it is suggested that blast dust containing CaO, SiO, MgO, $A1_2O_3$ and metallugical particle is compatible with PVC. Thermogravimetric analysis(TGA) showed that residual weight(%) at temperature $600^{\circ}C$ increased with the amount of blast dust and differential scanning calorimetry(DCS) showed that the thermal stability of PVC composite was increased when the weight ratio of blast dust was 8.83wt % X-ray diffractometry measurement also showed their blends and structures.

Conventional manufacturing process for PVC fiber was wet spinning. This study introduced a melt spinning process to spin PVC polymer, and two different drawing methods were investigated: wet-drawing and dry-drawing. The PVC fiber produced by the dry-drawing method showed superior tensile properties to that produced by the wet-spinning method. The effects of spinning speed and draw ratio on the fiber properties were also investigated.

1. 서론 : 화약이나 고체 충진제, 고체로\ulcorner 추진제의 산화제, slurry blasting agent 및 동물사료의 식품첨가제로 사용되고 있는 과염소산은 발화나 폭발성이 매우 강한 산화제로 정확한 순도를 측정하는 것은 중요하다. 용량분석법과 중량분석법에 비교하여 조작이 간단하고 편리한 과염소산이온의 농도를 직접 측정할 수 있는 PVC막 전극에 대한 많은 연구가 진행되고 있다. (생략)