Earticle

본 연구에서는 폐전선 피복플라스틱의 재활용을 위해 마찰하전형 정전선별법을 이용하여 PVC와 rubber의 재질분리 실험을 수행하였다. 하전물질의 종류에 따른 실험결과 PVC와 Rubber의 중간 일함수 값을 갖고 있는 PP 재질이 가장 효과적이었으며, 단일 시료보다PVC와 Rubber의 혼합조건에서 더 높은 하전 값을 나타내었다. 하전특성 실험결과 공기량은 10.28wt/s 이상 그리고 상대습도는 40% 이하의 조건에서 입자의 높은 하전량을 얻을 수 있음을 확인하였다. 분리특성 실험결과 전압세기가 25kv 이상 그리고 분리대의 위치는 전기장의 중앙(0)으로부터 Negative 전극으로 -lcm 이동한 지점으로, 이때 PVC의 품위와 회수율을 각각 99.5%와 95%인 결과를 얻었다.

폴리카프로락톤 (PCL)/폴리염화비닐(PVC) 블렌드 시스템에서 PCL 조성 5 ~ 23%에 대한 상용성, 기계적 성질과 분자간의 상효작용에 대하여 연구하였다. 유리전이온도(T$_g$) 거동을 토대로 용융 혼합된 블렌드의 상용성을 측정한 결과 분자 수준으로 혼합되었다는 것을 관찰하였으며, PCL의 함량이 증가함에 따라 블렌드의 T$_g$는 낮은 온도 쪽으로 이동하였다. 또한 PCL/PVC 블렌드에 대하여 Fox식을 이용하여 예측한 T$_g$값과 실험에서 측정된 T$_g$값은 잘 일치하였다. 따라서 PCL/PVC 블렌드 시스템은 PCL 함량이 5 ~ 23%에서 무정형 고분자임을 나타낸다. 또한 분자간의 상호작용이 기계적 물성에 미치는 영향을 관찰하기 위하여 인장 강도, 탄성률 및 항복 강도와 같은 기계적 물성을 측정하여 관찰하였다. 그 결과 탄성률과 항복 강도 값은 PCL 함량이 약 5%에서, 인장 강도 값은 PCL 함량이 11%에서 최대값을 나타내었다. 그리고 PCL 함량 13%이상까지는 인장 강도 값이 순수 PVC보다 높았으며, 신장률은 낮은 값을 나타내었다. 결과적으로 PCL/PVC 블렌드 시스템은 PCL 함량이 약 13%까지 T$_g$값은 내려가고, 인장 강도는 증가하면서 신장률은 감소하는 반가소화 현상을 나타내었다.

The miscibility, molecular interaction and tensile properties of the blends of poly (${\varepsilon}$-caprolactone) (PCL) with poly(vinyl chloride) (PVC) have been studied. The measured glass transition temperature values of PCL/PVC blends were found to be well fitted by Fox equation. We found that PCL/PVC blends are amorphous up to 23% PCL content. The blends showed the highest Young's modulus and yield strength at 5% PCL content and the highest tensile strength at 11% PCL content. The blends with low contents of PCL(up to 13%) show increased tensile strength and decreased elongation of PCL/PVC blends. Consequently, the antiplasticization phenomenon is observed in the PCL/PVC blends.

상용의 PVC가 갖는 소수 특성을 개선하기 위해 산소, 아르곤, 수소 이온의 이온 보조 반응법을 이용하여 표면의 친수성을 증대시키고 이때 친수성 증가의 직접적 원인인 표면에너지 증가를 각각의 이온조사에 따라서 비교하였다. 이온 소스는 직경 5-cm의 cold hollow cathod ion gun을 이용하였으며 산소, 아르곤, 수소이온을 이온 조사량 5$\times$1014~1$\times$1017ions/cm2까지 변화시키고 산소의 유량을 0~8sccm까지 변화시키면서 표면 에너지 변화를 관찰하였다. 표면 에너지는 두 가지의 극성 용매인 물과 포름아마이드의 접촉각을 정적 접촉각 측정기를 이용하여 측정한 후에 이로부터 dispersion force와 polar force를 계산하여 얻었다. 계산된 결과를 보면 처리 전과후의 dispersion force의 변화는 거의 없으나 polar force는 크게 증가하였다. 이때 표면 에너지의 증가는 표면 형상의 변화와 극성을 띠는 친수성기의 증가로 여겨지며 각각의 경우에 대한 분석을 위해 AFM과 XPS 분석을 시행하여 각각의 이온에 따르는 표면 형상의 변화와 친수성기의 형성 및 상대적인 양을 비교하였다.

PVC 방사를 원활히 하기 위해서는 무엇보다도 PVC 첨가물의 양이 중요하다. 첨가물 중에서 가장 큰 영향을 미치는 것으로는 활제와 안정제가 있다. 이 두 가지의 첨가물에 따라서 PVC 방사의 공정성이 달라지는데 활제의 양이 적당하지 않으면 원활한 방사를 할 수 가 없게 되고 안정제의 양이 적당하지 않으면 빨리 탄화가 발생하거나 사의 품질을 저하시킨다. (중략)

AgI/PVC${\cdot}$THF막전극은 단일할로겐화이온과 할로겐화이온 혼합물을 질산은표준용액으로 전위차법적정할 때 지시전극으로 사용될 수 있다. 그러나 할로겐화이온혼합물을 단계적정할 때 오차가 매우 큼을 알 수 있었다. 그러나 적정용액에 $NaNO_3$나 $Ba(NO_3)_2$같은 뭉침제를 가하면 오차가 매우 감소한다. 또한 젤라틴과 거름종이의 효과 그리고 온도의 영향도 조사하였다.

The AgI/ PV${\cdot}$THF membrane electrode could be used as an indicator electrode in the potentiometric titration of single halide and mixture halide solutions with the standard solution of silver nitrate. The errors in the stepwise titrations of mixture halide solutions were considerably large, but by addition of flocculating agent, such as $NaNO_3$ or $Ba(NO_3)_2$, in the sample solution, the errors were greatly reduced. Also, the effects of gelatin, filter paper and temperature on the titration errors were examined.

A three-layered PVC sheet consisting of polyvinyl chloride (PVC) and woven polyester fabric was prepared by extrusion and calendering. The flexibility and durability of the PVC were tuned by adding plasticizers, additives, and surface coatings. The tensile and tear strengths of the three-layered PVC sheet were higher than those of commercial two-layered sheet, while exhibiting low weight. The concentrations of the total volatile organic compounds (TVOCs) and formaldehyde (HCHO) emitted from the sheet were also lowered. The PVC sheet remained stable after prolonged exposure to UV light, signifying that the PVC sheet is suitable for cargo screen applications.

프탈레이트계 PVC 가소제를 대체하기 위해 식물유 기반 아세틸화 모노글리세라이드(AMG)계 가소제를 합성하여 PVC에 대한 가소성능을 평가하였다. 코코넛 오일과 글리세롤로부터 전이 에스테르화 반응과 아세틸화 반응을 거쳐 AMG-CoCo를 합성하였고 글리세롤 모노올리에이트(GMO)로부터 아세틸화 반응을 통해 AMG-GMO를 그리고 추가적으로 에폭시화 반응을 거쳐 AMG-GMO-Epoxy 합성하고 그 구조들을 확인하였다. AMG계 가소제의 열안정성을 평가한 결과, AMG-CoCo < AMG-GMO < AMG-GMO-Epoxy 순으로 열분해 온도가 높았으며 모두 상용 가소제인 DOP의 열분해 온도보다 높았다. AMG계 가소제를 함유한 PVC의 경우, 인장 신율은 770~810%, 인장 강도는 약 19~22 MPa로 DOP로 가소화된 PVC보다 우수하였다. DMA 분석 결과, AMG-GMO-Epoxy와 PVC는 매우 우수한 섞임성을 보여주었고 AMG-GMO-Epoxy를 50 phr 함유한 PVC의 $T_g$는 $24^{\circ}C$까지 감소하였다. 물에 대한 가소제의 용출 실험 결과, AMG-GMO와 AMG-GMO-Epoxy를 50 phr 포함한 PVC 경우 무게 감소가 약 2%와 1%로 내용출성이 매우 우수함을 알 수 있었다. 따라서 AMG-GMO-Epoxy가 DOP를 대체할 PVC 가소제로 경쟁력이 있다고 할 수 있다.

To replace phthalate plasticizer for PVC, acetylated monoglyceride (AMG) plasticizers were prepared from plant oil and their plasticization effects were also investigated. Transesterification of coconut oil by glycerol followed by acetylation with acetic anhydride gave AMG-CoCo (Coco : Coconut Oil). In addition, AMG-GMO (GMO : Glycerol monooleate) and AMG-GMO-Epoxy were synthesized by acetylation and epoxidation with glycerol monooleate. It was found that the thermal stability of AMG plasticizers increased in the following order: AMG-GMO-Epoxy > AMG-GMO > AMG-CoCo and all three plasticizers were thermally more stable than those of common petroleum-based plasticizer DOP (Dioctyl phthalate). The tensile strain values of the PVC containing AMG compounds were ca. 770~810%, while tensile strength values were ca. 19~22 MPa, which were higher than those of PVC containing DOP. DMA (Dynamic Mechanical Analysis) results showed that the miscibility of AMG-GMO-Epoxy in PVC was excellent and the $T_g$ of PVC containing AMG-GMO-Epoxy at 50 phr decreased down to $24^{\circ}C$. Finally, the leaching experiment result showed that the weight loss values of PVC containing AMG-GMO and AMG-GMO-Epoxy at 50 phr were as low as 2 and 1%, respectively, indicating that they have high water migration resistance. The above findings suggested that AMG-GMO-Epoxy could be one of plant oil-based PVC plasticizers to replace DOP.

Polyvinyl chloride (PVC) has been used as a general-purpose polymer because of its lower cost, good durability and mechanical properties compared to other materials. However, PVC is vulnerable to heat deformation and generates a toxic gas like hydrogen chloride. Therefore, it is important to delay or prevent the flame retardancy and thermal degradation of the PVC during the processing. It was reported that aluminum trihydroxide (ATH) improved flame retardancy as well as smoke inhibition of the virgin polymer. In this study, PVC composites by addition of ATH were compounded in a modular intermeshing co-rotating twin screw extruder. The PVC composites with different concentrations of ATH (0~5 phr) were analyzed. Flame retardancy of the PVC composite significantly increased depending on the ATH concentration. LOI of the composite also increased with the concentration of ATH. There were no significant differences for the thermal properties of the PVC composites with ATH.

이온 교환막은 전기투석, 확산투석, Redox flow 전지, 연료전지 등 다양하고 넓은 분야에서 사용되고 있다. 초음파를 이용하여 만들어진 PVC 양이온 교환막을 시간을 변화시켜 가면서 술폰화 반응에 의해 제조하였다. 술폰화제로 황산을 사용하였으며, 술폰화 PVC 양이온 교환막의 기본구조와 특성을 FT-IR, EDX, Water uptake, 이온교환용량(IEC), 전기저항(ER), 전도도, 이온수송수 및 표면 morphology를 SEM 분석하였다. FT-IR 스펙트럼 분석결과 술폰화 PVC 양이온 교환막에 술폰산기가 도입되었음을 확인하였으며 멤브레인의 Water uptake, IEC, 전기 저항 및 ion transport number의 최대값은 각각 40.2%, 0.87 meq/g, $35.2{\Omega}{\cdot}cm^2$ 및 0.88이었다.

Ion exchange membrane is widely used in various fields such as electro dialysis, diffusion dialysis, redox flow battery, fuel cell. PVC cation exchange membrane using ultrasonic modification was prepared by sulfonation reaction in various sulfonation times. Sulfuric acid was used as a sulfonating agent with ultrasonic condition. We've characterized basic structure of sulfonated PVC cation exchange membrane by FT-IR, EDX, water uptake, ion exchange capacity (IEC), electrical resistance (ER), conductivity, ion transport number and surface morphology (SEM). The presence of sulfonic groups in the sulfonated PVC cation exchange membrane was confirmed by FT-IR. The maximum values of water uptake, IEC, electrical resistance and ion transport number were 40.2%, 0.87 meq/g, $35.2{\Omega}{\cdot}cm^2$ and 0.88, respectively.

This project investigated the use of two types of thermoplastic pipes, High-Density Polyethylene (HDPE) and Poly-vinyl Chloride (PVC), as cross-drains under highways. Pipes ranging from 0.3 m (12 in.) to 1.5 m (60 in.) in diameter were evaluated under deep fills, minimum cover, and construction loads. In addition to a comprehensive literature review, an analytical study into the allowable fill heights for thermoplastic pipes and a field study to observe the installation and performance of the pipe in service conditions were conducted. Based on the study findings, recommendations regarding how and when thermoplastic pipe should be installed are provided.

This study presents a nondestructive test for underwater PVC pipes. To use guided ultrasonic waves, specially denoted by cylindrical Lamb waves, a test setup was made in a water tank using the pitch and catch mode and specimens were made to give artificial cutouts located in the circumferential direction of the pipes. Total three states of damaged levels were considered to see how the guided waves interact with the defects. For the experimental adjustments, three different pipe diameters (60, 90, 114 mm) were tested, and two factors - incident angle (10 and $40^{\circ}$) and distance (50 and 200 mm) - were tried. From the results, regardless of the diameters and two experimental factors, it is shown that the degrees of defects were recognized through amplitude and arrived time of the very first part of the received cylindrical Lamb waves. Between amplitude and arrived time, it is found that the amplitude gives more sensitive results.

Zinc soap and Zn/Ba mixed metal soap were synthesized and PVC plastisol with mixed metal soap and various costabilizers were also synthesized with good structures and characterized by IR and $^1H$-NMR. The IR spectrums and $^1H$-NMR spectrums of the synthesized soaps were in very good accordance with the structures proposed by earlier workers. In using phosphite as a costabilizer, TIDP phosphite was shown to be the excellent thermal stabilization effect at the low temperature and TNPP phosphite was shown to be the excellent thermal stabilization effect at the high temperature. In case of antioxidant, it was revealed that antioxidant was not effective in the low temperature thermal stabilization effect while highly effective in the high temperature thermal stability. $NaClO_4$ solution with sorbitol solvent had the best thermal stabilization effect among $NaClO_4$ solution series at low and high temperature.

본 연구에서는 poly(vinyl chloride) (PVC)가지형 공중합체 전해질과 헤테로폴리산(HPA)을 이용하여 유무기 합성 전해질막을 제조하였다. poly(vinyl chloride)-g-poly(styrene sulfonic acid) (PVC-g-PSSA)는 PVC의 이차 염소의 직접적인 개시를 이용한 atom transfer radical polymerization (ATRP)로 합성하였다. 이때, HPA 나노입자는 수소 결합을 통해 PVC-g-PSSA 가지형 공중합체와 결합하는 것을 FT-IR spectroscopy를 통하여 확인하였다. 전해질막의 수소이온 전도도는 HPA의 질량 분율이 0.3이 될 때까지 상온에서 0.049에서 0.068 S/cm로 증가하였다. 이것은 HPA 나노입자 고유의 전도도와 가지형 공중합체가 가지고 있는 술폰산의 강화된 산도 때문이라고 추정된다. 합습률은 HPA의 질량 분율이 0.45까지 증가할수록 130에서 84%로 감소하였다. 이것은 HPA나노입자와 고분자 메트릭스 사이의 수소 결합의 상호작용 때문에 물을 흡수하는 site의 수가 감소한 결과라고 볼 수 있다. 열중량 분석결과 HPA의 농도가 증가할수록 전해질막의 열적 안정성이 강화된다는 것을 알 수 있었다.

A series of organic-inorganic composite membranes from poly(vinyl chloride) (PVC) graft copolymer electrolyte and heteropolyacid (HPA) were prepared for proton conducting membranes. First, poly(vinyl chloride)-g-poly(styrene sulfonic acid) (PVC-g-PSSA) was synthesized by atom transfer radical polymerization (ATRP) using direct initiation of the secondary chlorines of PVC. HPA nanoparticles were then incorporated into the PVC-g-PSSA graft copolymer though the hydrogen bonding interactions, as confirmed by FT-IR spectroscopy. The proton conductivity of the composite membranes increased from 0.049 to 0.068 S/cm at room temperature with HPA contents up to 0.3 weight traction of HPA, presumably due to both the intrinsic conductivity of HPA particles and the enhanced acidity of the sulfonic acid of the graft copolymer. The water uptake decreased from 130 to 84% with the increase of HPA contents up to 0.45 of HPA weight traction, resulting from the decrease in number of water absorption sites due to hydrogen bonding interaction between the HPA particles and the polymer matrix. Thermal gravimetric analysis (TGA) demonstrated the enhancement of thermal stabilities of the composite membranes with increasing concentration of HPA.

설비건설업을 하다보면 여러 가지 자재들을 사용해야 한다. 하지만 비슷한 제품이 많아 우리가 시공하는 현장에 어떤 제품이 적합한 것인지 궁금할 때가 많다. 더욱이 제품 특징 등을 알고 싶을 때 일일이 찾아봐야 하는 번거로움이 따른다. 본지는 회원사의 설비자재에 대한 궁금증을 해소하기 위해 지난 2007년 6월호부터 특정 지재를 선정하여 제품의 특징 용도 등을 담은 '자재의 모든 것'을 게재한다.

본 연구에서는 headspace-solid phase microextraction(HS-SPME)-GC/MS법을 이용하여 PVC 벽지의 원자재에서 방출되는 TVOC를 분석하여 기여도를 평가하였다. 시료로 사용한 원자재는 6종으로 희석제, 안정제, 가소제, 충전제, 발포제와 PVC 레진이다. 각 원자재 시료를 22 mL 바이알에 9 mL씩 취한뒤 $100^{\circ}C$에서 1시간동안 평형을 이룬 다음 $75{\mu}m$ Carboxen-PDMS 화이버로 $25^{\circ}C$에서 1시간 흡착하여 GC/MS로 분석하였다. 정성결과 toluene, ethylbenzene 그리고 xylene과 같은 방향족 화합물과 acetone, methoxyacetone, 2-butanone 등의 케톤류와 nonane, decane, undecane 등의 알켄류가 검출되었다. 그 밖에도 ethanol, butanol 등의 알콜류와 알데히드류 등이 검출되었다. TVOC 방출량은 희석제 $54.20{\mu}g/g$, 안정제 $32.88{\mu}g/g$, 가소제 $0.50{\mu}g/g$, PVC 레진 $0.88{\mu}g/g$, 발포제 $0.22{\mu}g/g$, 충전제가 $0.11{\mu}g/g$로 나타났다. 각 원자재의 TVOC 방출량과 배합비를 고려한 TVOC 기여도는 희석제 0.708, 안정제 0.129, PVC 레진 0.115 순으로 높게 나타났다. 따라서 희석제와 안정제, PVC레진의 질적인 개선을 통해 TVOC 방출량을 줄이는 노력이 필요하다. 또한 본 연구에서 개발한 HS-SPME-GC/MS 방법은 원자재의 TVOC 분석에 유용하게 사용될 것으로 생각된다.

A wallpaper having many surfaces in indoor is composed of various raw materials. In this study, TVOC contribution from raw materials of PVC wallpaper was evaluated by using headspace-solid phase microextraction (HS-SPME)-GC/MS. Samples were diluent, resin stabilizer, plasticizer, filler, blowing agent and PVC resin. 9 mL of each sample was put into 22 mL glass vial and they were equilibrated for 1 hour at $100^{\circ}C$. Headspace in vial was absorbed to $75{\mu}m$ Carboxen-PDMS fiber and analyzed by GC/MS. Aromatic compounds like a toluene, ethylbenzene and xylene, ketones compounds like a acetone, methoxyacetone and 2-butanone and alkane compounds like a nonane decane and undecane were identified from raw materials. And alcohol compounds like a ethanol and butanol and aldehydes were detected. TVOC emission of diluent, resin stabilizer, plasticizer, PVC resin, blowing agent and filler were $54.20{\mu}g/g$, $32.88{\mu}g/g$, $0.50{\mu}g/g$, $0.88{\mu}g/g$, $0.22{\mu}g/g$ and $0.11{\mu}g/g$, respectively. Contribution of TVOC emission of diluent, resin stabilizer and PVC resin that were concerned about add ratio were 0.708, 0.129, 0.115, respectively. In conclusion, it's necessary to reduce TVOC emission through improvement of diluent, resin stabilizer and PVC resin. Also, HS-SPME-GC/MS method which was developed in this study will be used for raw materials analysis effectively.

Polyvinyl chloride (PVC) fibers were melt-spun to prepare mono and multifilament yams. To find optimum spinning and drawing conditions, various parameters such as spinning temperature, spinneret diameter, drawing temperature, and drawing ratio were examined. From the observation of the spinnability under various conditions, we found that the optimum conditions were as following: the extrusion temperature and die temperature were $175-180^{\circ}C$ and $185-190^{\circ}C$, and the drawing temperature and drawing ratio were $85-95^{\circ}C$ and 3.4, respectively. Under these conditions, the spinneret diameter could be reduced to the minimum value, 0.5 mm. Spun PVC filament yams were subjected to the different yam texturing process of stuffing box and pin false-twist method. The PVC yarn fabric was prepared by the knitting of textured yams. Finally, the anion-emission and antibiotic properties of the knitted PVC fabrics were precisely evaluated.

600V용 비닐절연전선의 절연체로 사용되는 PVC의 열적 열화 특성을 열중량분석과 가속열화시험을 이용하여 연구하였다. TGA를 이용한 활성화에너지는 Kissinger method와 Flynn-Wall-Ozawa method를 이용하여 측정하였다. 활성화에너지를 계산한 결과 600V용 PVC 절연전선은 89.29 kJ/mol～111.39 kJ/mol, 내열 PVC절연전선은 97.80 kJ/mol～119.25 kJ/mol로 나타났다. 또한, 저온인 80, 90, 10$0^{\circ}C$에서 장기가속열화를 통한 활성화에너지를 아레니우스 방정식을 이용하여 계산하였다. 그 결과 PVC 절연전선은 92.16 kJ/mol,내열 PVC절연전선은 97.52kJ/mol로 나타났다. 연구결과에 있어 600V내열 PVC절연 전선이 PVC 절연전선에 비해 활성화에너지가 큼을 알 수 있었으며, 사용 수명을 예측함에 있어서도 장기적으로 안정함을 예측할 수 있다.

Thermal degradation of PVC which used for insulator of 600V vinyl insulated wire has been studied by thermo gravimetry analysis and accelerated thermal aging test. The activation energy using thermo gravimetry analysis was determined by the kinetic methods, such as Kissinger and Flynn-Wall-Ozawa. The activation energy was determined to from 89.29 kJ/mol to 111.39 kJ/mol in 600V PVC insulated wire and from 97.80 kJ/mol to 119.25 kJ/mol in 600v heat-resistant PVC insulated wire. And also, the activation energy through a long-term thermal aging test was calculated by using Arrhenius equation In the low temperature of 8$0^{\circ}C$, 9$0^{\circ}C$, 10$0^{\circ}C$. The results showed that 600V PVC insulated wire was 92.16 kJ/mol, and 600v heat-resistant PVC insulated wire was 97.52 kJ/mol. Consequently, the activation energy of 600V heat-resistant PVC insulated wire is larger than 600V PVC insulated wire. Therefore, it can be predicted that 600V heat-resistant PVC insulated wire has a long-term stability relatively.

The quantity, process and kinetics of di-(2-ethylhexyl)phthalate (DEHP) migration in the 30/70 and 40/60 poly(vinylchloride) (PVC)/DEHP blends were investigated using gas chromatograph. A thin and flexible PVC sheet was soaked in surrounding medium (SM) of water/ethanol mixture and acetonitrile with constant stirring to release DEHP. By observed concentration of DEHP in the SM, it is found that acetonitrile is more intense in DEHP migration than water/ethanol mixture. In addition the amount of extracted DEHP is proportional to the leaching temperature and added ratio of DEHP. The behavior of DEHP migration from flexible PVC sheets was described by the Ficks's law with $2.72-10.1\;{times}\;10^{-10}$ cm²/s of the diffusion coefficients.