Earticle

초록

영어

The objective of this study was to develop and assess the performance of an aseptic system for liquid milk contained in plastic bottles, from a small-scale production standpoint. Commercial sterility tests conducted on the bottled milk were utilized in our assessments of the system, via the identification and monitoring of the principal points of the process. Four 150 L batches of milk with pH values of approximately 6.7 were heat-processed at between 137 and 143℃ for 10 see in a plate heat exchanger, and then aseptically transferred to 500 mL high-density polyethylene (HOPE) bottles, in an ISO class 7 clean room. The aseptic condition of the bottles was achieved via 10 see of rinsing with a mixture containing 0.5% peracetic acid and 0.8% hydrogen peroxide at 30℃, followed by another rinse with sterile water. Of the 4 batches processed, 2 were determined to exhibit commercial sterility, on the basis of the physical-chemical and microbiological criteria adopted. It was concluded that some adjustment of the processing line was required in order to achieve full commercial sterility for all processes. The aseptic system developed and assessed in this study was demonstrated to have great potential for the processing and transferring of milk into plastic bottles, from a small-scale production standpoint.

목차

Abstract
 Introduction
 Materials and Methods
 Results and Discussion
 Acknowledgments
 References

키워드

저자

• Petrus, Rodrigo Rodrigues [ Universidade de Sao Paulo, Faculdade de Zootecnia e Engenharia de Alimentos ]
• Faria, Jose de Assis Fonseca [ Universidade Estadual de Campinas, Faculdade de Engenharia de Alimentos ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  Food Science and Biotechnology

• 간기

  격월간

• pISSN

  1226-7708

• 수록기간

  1992~2009

• 십진분류

  KDC 574 DDC 664