Earticle

현재 위치 Home

<학술연구>

전기추진 모터보트의 수중 날개 길이 방향 위치가 선체 부상과 저항성능에 미치는 영향에 관한 연구
A Study on the Effect of Longitudinal Position of Underwater Hydrofoil on Hull Floating and Resistance Performance for Electric Propulsion Motor Boat

첫 페이지 보기
  • 발행기관
    한국기계항공기술학회(구 한국기계기술학회) 바로가기
  • 간행물
    한국기계항공기술학회지(구 한국기계기술학회지) KCI 등재 바로가기
  • 통권
    제28권 제4호 (2026.08)바로가기
  • 페이지
    pp.724-728
  • 저자
    최준웅, 이찬재, 남궁호, 정우철
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A491244

※ 기관로그인 시 무료 이용이 가능합니다.
※ 학술발표대회집, 워크숍 자료집 중 4페이지 이내 논문은 '요약'만 제공되는 경우가 있으니, 구매 전에 간행물명, 페이지 수 확인 부탁 드립니다.

4,000원

원문정보

초록

영어
In this study, the effect of underwater hydrofoil was analyzed on a electric propulsion high speed motor boat by model test at a high speed water tank. The hull floating and resistance performance according to the longitudinal position, area and angle of attack of the foil with the same cross sectional shape were analyzed and the required power was estimated. Through this study, it was confirmed that the longitudinal position of the foil significantly affects hull floating and resistance performance. The reason is that the moment increases as the foil position moves farther away from the hull center. If the hull floats at a relatively low speed, a sudden change in trim may occur. After the hull floating, a rapid reduction in required power occurs because resistance acts only on the foil and strut.

목차

Abstract
1. 서론
2. 연구대상
2.1 대상 선형
2.2 수중 날개
2.3 추진기추진기는 100Kw
3. 모형시험
3.1 시험조건
3.2 시험결과
4. 결론
후기
References

저자

  • 최준웅 [ Jun-Woong Choi | Principal Researcher, Marine Leisure & Safety Research Center, Research Institute of Medium & Small Shipbuilding ]
  • 이찬재 [ Chan-Jae Lee | Principal Researcher, Safety Research Dept., Korea Maritime Transportation Safety Authority ]
  • 남궁호 [ Ho NamGoong | Assistant Surveyor, Safety Research Dept., Korea Maritime Transportation Safety Authority ]
  • 정우철 [ Uh-Cheul Jeong | Member, Professor, Dept. of Naval Architecture & Ocean Engineering, Inha Technical College ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국기계항공기술학회(구 한국기계기술학회) [Korean Society of Mechanical Technology]
  • 설립연도
    1999
  • 분야
    공학>기계공학
  • 소개
    기계 관련 산업 분야에 관한 학술과 현장 적용 기술을 연구하고 교류하며, 이에 관련된 학문과 기술 발전 및 보급에 기여함으로써 과학과 기술의 진흥에 이바지함을 그 목적으로 한다.

간행물

  • 간행물명
    한국기계항공기술학회지(구 한국기계기술학회지) [Journal of the Korean Society of Mechanical and Aviation Technology ]
  • 간기
    격월간
  • pISSN
    1229-604X
  • eISSN
    2508-3805
  • 수록기간
    1999~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 550 DDC 620

이 권호 내 다른 논문 / 한국기계항공기술학회지(구 한국기계기술학회지) 제28권 제4호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장