Earticle

초록

영어

This study presents the design and structural stability evaluation of a precision watering seeder that supplies a metered amount of water to the seed hole immediately after seeding. The proposed system detects the rotational position of the seeding drum using a Hall sensor and neodymium magnets, and an Arduino Mega controls the opening time of a solenoidvalve through a MOSFET module. The main design feature is the 628.32 mm valve position reference, which is three times the 209.44 mm seeding interval of a six-spike drum. This integer-multiple arrangement synchronizes the watering point with the previously formed seed hole. Static structural analysis using ANSYS showed a representative probe stress of 47.934 MPa and a safety factor of 4.28, while ADAMS flexible-body dynamic analysis showed a maximum hot-spot stress of 81.31 MPa and a safety factor of 2.53. Watering tests demonstrated that the proposed system delivered approximately 20 mL under representative operating conditions, confirming the basic functional feasibility of the watering module.

목차

Abstract
1. 서론
2. 정밀 급수 파종기 설계
2.1 628.32 mm 위치 정렬 기준
2.2 제어 시스템 개략도
3. 구조 안정성 해석 및 기능 검증
3.1 ANSYS 정적 구조해석
3.2 ADAMS 유연체 동역학 해석
3.3 급수 기능 검증
4. 결론
후기
References

키워드

저자

• 김규택 [ Gyutaek Kim | Dept. of Mechanical Engineering, Mechatronics Lab, Jeonju University ]
• 허정원 [ Jungwon Heo | Dept. of Mechanical Engineering, Mechatronics Lab, Jeonju University ]
• 김대영 [ Daeyoung Kim | Dept. of Mechanical Engineering, Mechatronics Lab, Jeonju University ]
• 이동빈 [ Dongbin Lee | Dept. of Mechanical Engineering, Mechatronics Lab, Jeonju University ]
• 김진수 [ Jinsoo Kim | Dept. of Mechanical Engineering, Mechatronics Lab, Jeonju University ] Corresponding Author

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  한국기계항공기술학회 학술대회논문집(구 한국기계기술학회 학술대회논문집) [Proceedings of KSMT Annual Meeting]

• 간기

  부정기

• 수록기간

  2000~2026

• 십진분류

  KDC 550 DDC 620