수산화칼슘-고로슬래그 기반 무시멘트 섬유복합체의 섬유 종류에 따른 유동성 및 역학특성 평가
Effect of fiber types on the flowability and mechanical properties of cementless fiber-reinforced composites based on Ca(OH)2 and GGBS
This study investigates the effect of fiber type on the flowability and mechanical properties of cementless fiber-reinforced composites using a calcium hydroxide-ground granulated blast furnace slag (Ca(OH)2-GGBS) binder system. Four fibers, jute, nylon, polypropylene (PP), and polyvinyl alcohol (PVA), were incorporated at a constant volume fraction of 2% under identical matrix conditions. The binder consisted of GGBS and Ca(OH)2 at a ratio of 0.92:0.08, and both the sand-to-binder ratio and water-to-binder ratio were fixed at 0.30. Slump-flow, compressive strength, direct tensile, and shear tests were conducted to evaluate the fresh and hardened performances of the composites. The results showed that fiber type significantly influenced both flowability and mechanical behavior. PP and nylon mixtures showed relatively high slump-flow values of 695 mm and 691 mm, whereas jute and PVA mixtures showed lower values of 631 mm and 613 mm. The compressive strength ranged from 37.54 to 44.92 MPa, with the nylon mixture showing the highest value. In direct tension, the PVA mixture exhibited the best post-cracking behavior, with a first cracking stress of 3.89 MPa, a tensile strength of 5.45 MPa, and a tensile strain of 4.60%, accompanied by multiple microcracking. In contrast, the jute and PP mixtures showed little or no stress increase after first cracking, while the nylon mixture showed only limited post-cracking tensile response in some specimens. In shear, the PVA mixture showed the highest shear strength of 9.27 MPa, whereas the other mixtures showed similar values ranging from 5.52 to 5.71 MPa. These results indicate that PVA fiber is the most effective for improving the tensile and shear performances of the Ca(OH)2-GGBS-based cementless composites.
목차
Abstract 1. 서론 1.1 연구배경 1.2 선행연구 검토 1.3 연구목적 및 범위 2. 실험계획 2.1 사용재료 2.2 배합설계 2.3 실험방법 3. 실험 결과 및 분석 3.1 슬럼프플로우 실험 결과 3.2 압축강도 시험 결과 3.3 직접인장 실험 결과 3.4 전단실험 결과 4. 결론 REFERENCES
대한건축학회지회연합회 [The Regional Association of Architectural Institute of Korea]
설립연도
2000
분야
공학>건축공학
소개
본회는 건축에 관한 학술․ 예술․ 기술을 연구 연마하는 지회회원들의 입지향상과 회원상호간의 친목도모와 함께 건축 문화창달에 기여함을 목적으로 한다.
목적을 달성하기 위하여 다음의 사업을 한다.
1. 지회회원의 입지향상과 친목도모
2. 건축에 관한 조사․연구지도 및 이에 관련된 사업
3. 회지, 논문집, 연구보고서 기타 건축에 관한 도서의 간행
4. 건축에 관한 강습회․강연회․간담회․전람회․견학회 등의 개최
5. 건축에 관한 계획, 감독, 기술검토에 대한 국가공공기관 기타의뢰에 관한 사항
6. 국내외 관계 제 학회와의 교류 및 회의참석
7. 기타 본회 목적달성에 필요한 사업
간행물
간행물명
대한건축학회연합논문집 [Journal of the Regional Association of Architectural Institute of Korea]