Earticle

초록

영어

In this study, we performed optical simulations for two light sources: internal and external electrode light sources. Based on the optical simulation results, we created a practical design to verify the design validity and extract optimal design factors for each light source. The three key geometric variables in the design of a direct-lit flat panel light source are the distance between the two lamps, the distance between the lamps and the reflector, and the number of lamps. These variables significantly impact the optical design and determine various characteristics of the flat panel light source system. In this study, we used a 26 mm distance between the two lamps, a 4.5 mm distance between the lamps and the reflector, and a total of 20 lamps to derive optimal values ​​for these variables. Under these conditions, we created a practical design and evaluated its performance, achieving an excellent flat panel light source with a central luminance of 6,423 nits and a luminance uniformity of less than 5%. This study demonstrates that optical simulation techniques are an effective method for designing a surface-emitting light source system for medical LCDs, demonstrating the feasibility of achieving high performance while maintaining a low cost.

목차

Abstract
1. Introduction
2. Simulation
3. Results and Discussion
4. Conclusion
Acknowledgements
References

키워드

저자

• Jeong-Min Han [ 한정민 | Member, Dept. of Electrical Engineering, Seoil University ]
• Lyul-Yun Hwang [ 황율연 | Member, Dept. of Electrical and Electronic Engineering, DongShin University ] Corresponding Author

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  한국기계항공기술학회지(구 한국기계기술학회지) [Journal of the Korean Society of Mechanical and Aviation Technology ]

• 간기

  격월간

• pISSN

  1229-604X

• eISSN

  2508-3805

• 수록기간

  1999~2026

• 등재여부

  KCI 등재

• 십진분류

  KDC 550 DDC 620