Earticle

현재 위치 Home

열재생 온도가 재생탄의 물리적 특성 및 흡착능 변화에 미치는 영향
Effect of Thermal Regeneration Temperature on Physical Properties and Adsorption Capacity of Regenerated Carbon

첫 페이지 보기
  • 발행기관
    국제차세대융합기술학회 바로가기
  • 간행물
    차세대융합기술학회논문지 KCI 등재 바로가기
  • 통권
    제9권 10호 (2025.10)바로가기
  • 페이지
    pp.2530-2539
  • 저자
    윤혁규, 김영희
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A474883

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
This study evaluated the recovery of adsorption capacity and the changes in physical properties of coal-based, coconut-based, and wood-based granular activated carbons (GACs) used in advanced water treatment processes, according to variations in furnace temperature, in order to determine the economic regeneration conditions. The results showed that the optimum regeneration temperature varied depending on the carbon type, appearing in the order of coal-based, coconut-based, wood-based carbon. As the temperature increased, the adsorption capacity initially improved but decreased sharply beyond a certain threshold temperature, while the deterioration of physical properties occurred at a relatively lower temperature. The inflection points of adsorption capacity were observed at 950 °C, 840 °C, and 545 °C for coal-, coconut-, and wood-based carbons, respectively, whereas the corresponding physical property inflection points were found at 880 °C, 820 °C, and 500 °C. These findings indicate that although adsorption capacity increases up to its inflection point, the physical integrity of the carbon gradually declines. Therefore, setting the regeneration temperature within the range between the physical and adsorption inflection points is considered the most economical and efficient operating condition for activated carbon regeneration.
한국어
고도정수처리에 사용되는 석탄계, 야자계, 목탄계 입상 활성탄을 대상으로 로 내 온도 변화에 따른 흡착능 회복과 물리적 특성 변화를 평가하여 활성탄의 경제적 재생 조건을 도출하였다. 연구 결과, 탄종별로 재생 온도 범 위가 다르며 석탄계, 야자계, 목탄계 순으로 높게 나타났다. 온도 상승에 따라 흡착능은 증가하다가 일정 한계 온도 이후 급격히 저하되는 변곡점이 확인되었으며, 물리적 특성의 저하는 이보다 낮은 온도에서 먼저 발생하였다. 흡착 능 변곡점은 석탄계 950 ℃, 야자계 840 ℃, 목탄계 545 ℃, 물리적 특성 변곡점은 석탄계 880 ℃, 야자계 820 ℃, 목탄계 500 ℃로 나타났다. 흡착능은 변곡점까지 향상되지만 물리적 특성은 점차 저하되므로, 물리적 변곡점과 흡착 능 변곡점 사이의 범위에서 재생 온도를 설정하는 것이 경제적이고 효율적인 운전 조건으로 판단된다.

목차

요약
Abstract
Ⅰ. 서론
Ⅱ. 연구방법
2.1 연구대상
2.2 활성탄 재생 방법
2.3 분석 방법
Ⅲ. 결과 및 고찰
3.1 석탄계 활성탄의 재생결과
3.2 야자계 활성탄의 재생결과
3.3 목탄계 활성탄의 재생결과
3.4 활성탄의 종류별 재생특성 비교
3.5 활성탄 재생 경제성 검토
Ⅳ. 결론
REFERENCES

저자

  • 윤혁규 [ Hyuk-kyu Yoon | 호서대학교 벤처대학원 융합공학과 학생 ]
  • 김영희 [ Young-hee Kim | 호서대학교 벤처대학원 융합공학과 교수 ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    국제차세대융합기술학회 [International Next-generation Convergence technology Association]
  • 설립연도
    2017
  • 분야
    복합학>기술정책
  • 소개
    Ever since next generation convergence technology became one of the most important industries in the nation, computing professionals have encountered a growing number of challenges. Along with scholars and colleagues in related fields, they have gathered in avariety of forums and meetings over the last few decades to share their knowledge, experiences and the outcome of their research. These exchanges have led to the founding of the International Next-generation Convergence technology (INCA) on December 1, 2015. INCA was registered as an incorporated association under the Ministry of Information and Communications. The main purpose of the organization is to improve our society by achieving the highest capability possible in next generation convergence technology.

간행물

  • 간행물명
    차세대융합기술학회논문지 [The Journal of Next-generation Convergence Technology Association]
  • 간기
    월간
  • pISSN
    2508-8270
  • 수록기간
    2017~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 506 DDC 606

이 권호 내 다른 논문 / 차세대융합기술학회논문지 제9권 10호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장