Earticle

현재 위치 Home

<학술연구>

원전 캐비닛의 동적 거동 실험과 TMD 설계 해석에 대한 연구
Study on Dynamic Behavior Experiment and TMD Design Analysis of Nuclear Power Plant Cabinet

첫 페이지 보기
  • 발행기관
    한국기계항공기술학회(구 한국기계기술학회) 바로가기
  • 간행물
    한국기계항공기술학회지(구 한국기계기술학회지) KCI 등재 바로가기
  • 통권
    제27권 제4호 (2025.08)바로가기
  • 페이지
    pp.633-638
  • 저자
    이창수, 이홍기, 백재호, 권영철
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A472321

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

한국어
The purpose of this study is to investigate the dynamic behavior of the internal cabinet of a nuclear power plant due to an earthquake and the characteristics of cabinet vibration reduction by TMD(tuned mass damper). For this purpose, the experimental device was constructed and numerical analysis was performed. The experimental device for the dynamic behavior of the cabinet consists of a cabinet, sliding base, mount, actuator, exciter, and measuring system, and the frequency response function of the cabinet was obtained. In addition, the time history of the cabinet was analyzed for acceleration and displacement through TMD design and cabinet 3D modeling. The natural frequency and response of the cabinet were lowered by approximately 26% due to the structural rigidity of the cabinet under the conditions of door opening and sliding base strong excitation. The acceleration and displacement characteristics of the cabinet varied depending on the TMD mass, and the cabinet vibration reduction effect was the best when the TMD mass was 60kg. The reduction in acceleration and displacement of the cabinet was approximately 12.1–16.2% and 10.1–19.1%, respectively.

목차

Abstract
1. 서론
2. 캐비닛 동적 거동 실험
2.1 캐비닛 실험
2.2 실험결과
3. TMD 설계해석
3.1 TMD 설계
3.2 TMD 시간이력 해석
4. 결론
References

키워드

가속도 캐비닛 동적거동 주파수 동조질량댐퍼 진동저감 Acceleration Cabinet Dynamic behavior Frequency TMD Vibration reduction

저자

  • 이창수 [ Chang Soo Lee | RMS Technology Co., LTD., Ph.D. Student (Dept. of Mechanical Engineering, Sunmoon University) ]
  • 이홍기 [ Hong Gi Lee | RMS Technology Co., LTD. ]
  • 백재호 [ Jae Ho Baek | RMS Technology Co., LTD. ]
  • 권영철 [ Young Chul Kwon | Department of Mechanical Engineering, Sunmoon University ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국기계항공기술학회(구 한국기계기술학회) [Korean Society of Mechanical Technology]
  • 설립연도
    1999
  • 분야
    공학>기계공학
  • 소개
    기계 관련 산업 분야에 관한 학술과 현장 적용 기술을 연구하고 교류하며, 이에 관련된 학문과 기술 발전 및 보급에 기여함으로써 과학과 기술의 진흥에 이바지함을 그 목적으로 한다.

간행물

  • 간행물명
    한국기계항공기술학회지(구 한국기계기술학회지) [Journal of the Korean Society of Mechanical and Aviation Technology ]
  • 간기
    격월간
  • pISSN
    1229-604X
  • eISSN
    2508-3805
  • 수록기간
    1999~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 550 DDC 620

이 권호 내 다른 논문 / 한국기계항공기술학회지(구 한국기계기술학회지) 제27권 제4호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장