This study conducted an experiment to measure the radiation pressure according to the deployment length of the fire-fighting reel hose of the hose reel indoor fire hydrant facility. The experimental results are as follows. First, when the straight length of the fire-fighting reel hose is 5m, it can be determined that the radiation pressure of the average nozzle at one time is 0.1 MPa, which is not suitable. Second, when the straight length of the fire-fighting reel hose is 10m, the radiation pressure of the average nozzle at one time is 0.12 MPa, which is unsuitable. Third, it can be seen that when the straight length of the fire-fighting reel hose is 15m, the radiation pressure of the average nozzle at one time is 0.13 MPa, which is unsuitable. Fourth, when the straight length of the fire-fighting reel hose is 20m, it can be determined that the radiation pressure of the average nozzle at one time is 0.14 MPa, which is not suitable. Fifth, when the straight length of the fire-fighting reel hose is 25m, the radiation pressure of the average nozzle at one time is 0.17 MPa. Finally, when the straight length of the fire-fighting reel hose is 30m, the radiation pressure of the average nozzle at one time is 0.3 MPa circular, and the shorter the length of the fire-fighting reel hose is 0m.
한국어
이 연구는 호스릴 옥내소화전설비의 소방용 릴호스 전개길이에 따른 방사압력을 측정하는 실험을 하였다. 그 실험 결과는 다음과 같다. 첫째, 소방용 릴호스 직선길이가 5m일 때 1회 평균 노즐의 방사압력은 0.1MPa로 적합하 지 않다는 것을 판단할 수 있다. 둘째, 소방용 릴호스 직선길이가 10m일 때 1회 평균 노즐의 방사압력은 0.12MPa로 부적합한 결과를 얻을 수 있다. 셋째, 소방용 릴호스 직선길이가 15m일 때 1회 평균 노즐의 방사압력은 0.13MPa로 부적합함을 확인할 수 있다. 넷째, 소방용 릴호스 직선길이가 20m일 때 1회 평균 노즐의 방사압력은 0.14MPa로 적 합하지 않다는 것을 판단할 수 있다. 다섯째, 소방용 릴호스 직선길이가 25m일 때 1회 평균 노즐의 방사압력은 0.17MPa로 적합함을 확인할 수 있다. 마지막으로, 소방용 릴호스 직선길이가 30m일 때 1회 평균 노즐의 방사압력은 0.3MPa 원형으로 드럼에 감겨있는 소방호스가 0m로 소방용릴호스 길이가 짧을수록, 직선길이가 길어질수록 방사압 력이 선형적으로 변화하여 증가함을 알 수 있다.
목차
요약 Abstract Ⅰ. 서론 Ⅱ. 소방용 릴호스의 방사압력 측정 Ⅲ. 실험방법 1. 실험모델 2. 실험장치 및 구성 3. 실험조건 Ⅳ. 실험결과 및 고찰 1. 직선 전개길이 5m 2. 직선 전개길이 10m 3. 직선 전개길이 15m 4. 직선 전개길이 20m 5. 직선 전개길이 25m 6. 직선 전개길이 30m Ⅴ. 결론 References
국제문화기술진흥원 [The International Promotion Agency of Culture Technology]
설립연도
2009
분야
공학>공학일반
소개
본 진흥원은 문화기술(Culture Technology) 관련 산·학·연·관으로 구성된 비영리 단체이다. 문화기술(CT)은 정보통신기술(ICT), 문화적 사고 기반의 예술, 인문학, 디자인, 사회과학기술이 접목된 신융합기술(New Convergence Technology, NCT)로 정의한다. 인간의 삶의 질을 향상시키고, 진보된 방향으로 변화시키고, 문화기술 관련 분야의 학술 및 기술의 발전과 진흥에 공헌하기 위하여, 제3조의 필요한 사업을 행함을 그 목적으로 한다.
간행물
간행물명
The Journal of the Convergence on Culture Technology (JCCT) [문화기술의 융합]
간기
격월간
pISSN
2384-0358
eISSN
2384-0366
수록기간
2015~2025
등재여부
KCI 등재
십진분류
KDC 600DDC 700
이 권호 내 다른 논문 / The Journal of the Convergence on Culture Technology (JCCT) Vol.11 No.1