Earticle

현재 위치 Home

Original Article

시뮬레이션을 이용한 플랜트 시설물 제연설비에 관한 연구
A Study on the Smoke Removal Equipment in Plant Facilities Using Simulation

첫 페이지 보기
  • 발행기관
    한국재난정보학회 바로가기
  • 간행물
    한국재난정보학회논문집 KCI 등재 바로가기
  • 통권
    제20권 1호 통권63호 (2024.03)바로가기
  • 페이지
    pp.40-46
  • 저자
    최두찬, 양민혁, 고민혁, 오수민
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A444243

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
Purpose: In this study, in order to ensure the evacuation safety of plant facilities, we analyze the relationship between the height of smoke removal boundary walls, the presence or absence of smoke removal equipment, and evacuation safety. Method: Using fire and evacuation simulations, evacuation safety was analyzed through changes in the height of the smoke removal boundary wall, air supply volume and exhaust volume according to vertical dista. Result: In the case of visible drawings, if only 0.6m of boundary wall is used, the time below 5m reaches the shortest, and 1.2m of boundary width is 20% longer than when using smoke removal facilities. In the case of temperature, 1.2m is 20% longer than 0.6m when only the boundary width is used without smoke removal facilities. Conclusion: It was found that increasing the length of the smoke removal boundary wall could affect visibility, and installing a smoke removal facility would affect temperature. Therefore, it is determined that an appropriate smoke removal plan and smoke removal equipment should be installed in consideration of the process characteristics.
한국어
연구목적: 본 연구는 플랜트 시설물의 피난 안전성을 확보하기 위해 제연경계벽의 폭 및 제연설비의 유 무와 피난 안전성과의 관계를 분석하고자 한다. 연구방법: 화재 및 피난 시뮬레이션을 활용하여 제연경 계 벽의 폭, 수직거리에 따른 급기량, 배기량의 변화를 통해 피난 안전성을 분석 하였다. 연구결과: 가시 도의 경우 경계벽 0.6m 만을 사용한 경우 5m 이하로 되는 시점이 가장 짧게 도달하였으며 제연경계 폭 1.2m와 제연설비를 사용한 경우와 비교하여 20%긴 것으로 나타났다. 온도의 경우 제연설비를 사용하 지 않고 경계 폭만 사용하였을 때 0.6m 보다 1.2m가 20% 긴 것으로 확인되었다. 결론: 제연 경계벽에서 는 온도를, 제연설비에서는 가시도의 영향을 줄일 수 있으나, 반대로 제연 경계벽의 길이를 길게 하였을 때 가시도의 영향을 줄 수 있으며, 제연설비를 설치하였을 때 온도의 영향을 주는 것으로 나타났다. 따 라서, 공정 특성을 고려하여 적합한 제연계획과 제연 설비를 설치해야 할 것으로 판단된다.

목차

ABSTRACT
요약
서론
시뮬레이션 시나리오
플랜트 시설물 모델링
화재시뮬레이션 입력 변수
결과 분석
가시도
온도
결론
Acknowledgement
References

키워드

플랜트 화재 시뮬레이션 피난 시뮬레이션 제연경계벽 성능위주설계 Plant Fire Dynamics Simulator Pathfinder smoke boundary Performance Based Design

저자

  • 최두찬 [ Doo Chan Choi | Chief Executive Officer, KF UBIS CO., Ltd, Seoul, Republic of Korea ]
  • 양민혁 [ Min Hyeok Yang | Researcher, KF UBIS CO., Ltd, Seoul, Republic of Korea ] Corresponding author
  • 고민혁 [ MIn Hyeok Ko | Senior lnitiative, KF UBIS CO., Ltd, Seoul, Republic of Korea ]
  • 오수민 [ Su Min Oh | Researcher, KF UBIS CO., Ltd, Seoul, Republic of Korea ]

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국재난정보학회 [The Korean Society of Disaster Information]
  • 설립연도
    2005
  • 분야
    사회과학>사회복지학
  • 소개
    한국재난정보학회는 공공기관, 학계, 연구기관 그리고 민간관련회사 등의 상호협력과 유대강화를 통하여 국가 및 민간차원의 안전관련 재난정보 공유를 통한 재난사고에 대한 예방시스템 구축, 재난예방 관련 전문가 양성 교육, 연구용역 등 학문발전에 기여함을 목적으로 한다.

간행물

  • 간행물명
    한국재난정보학회논문집 [Journal of The Korean Society of Disaster Information]
  • 간기
    계간
  • pISSN
    1976-2208
  • 수록기간
    2005~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 338 DDC 361

이 권호 내 다른 논문 / 한국재난정보학회논문집 제20권 1호 통권63호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장