Earticle

현재 위치 Home

기술

가시광통신 시스템에서 하이브리드 전송기법을 이용한 BER 성능향상 기법에 대한 연구
A Study on the BER Performance Improvement Method Using Hybrid Transmission Techniques in Visible Light Communication System

첫 페이지 보기
  • 발행기관
    대한산업경영학회 바로가기
  • 간행물
    산업융합연구(구 대한산업경영학회지) KCI 등재 바로가기
  • 통권
    제22권 제2호 (2024.02)바로가기
  • 페이지
    pp.55-62
  • 저자
    이규진
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A443219

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
Visible light communication, which transmits information using visible light, has advantages such as ultra-high speed, ultra-delay, and ultra-connectivity, so research is being conducted as a way to complement 6G communication. In this paper, a study was conducted to overcome the performance degradation caused by the RGB mixing ratio in visible light communication. In a visible light communication system using LED lighting, the role of lighting is an important function, and when used for communication, the performance difference according to the RGB mixing ratio inevitably occurs. In particular, if the intensity of light is below a certain standard, the problem of deteriorating the performance of the entire system occurs. In this study, when a certain performance or less occurs in the communication system caused by the difference in the mixing ratio among the three RGB channels, the remaining two signals except the LED with the best performance are transmitted to STBC (Space-Time Block Coding) to ensure the quality of communication. A computer simulation was performed to verify the performance of the proposed system, and it can be seen that the performance of the proposed system is improved compared to the existing system.
한국어
가시광을 이용하여 정보를 전송하는 가시광통신은 초고속, 초지연, 초연결등의 장점이 있어 6G 통신을 보완하기 위 한 하나의 방안으로 연구가 진행되고 있다. 본 논문에서는 가시광통신에서 RGB 혼합비율에 의하여 발생하는 성능 열화를 극 복하기 위한 연구를 진행하였다. LED 조명을 이용한 가시광통신 시스템은 조명의 역할이 중요한 기능으로 통신을 위해 사용 할 경우 RGB 혼합 비율에 따른 성능 차이는 필연적으로 발생한다. 특히, 일정 기준 이하의 빛의 강도를 갖는 경우 시스템 전 체의 성능을 열화시키는 문제가 발생한다. 이 연구에서는 RGB 3개의 채널 중 혼합 비율의 차이로 발생하는 통신 시스템에서 일정 성능 이하가 발생할 때, 최고의 성능을 보이는 LED를 제외하고 나머지 2개의 신호를 STBC(Space-Time Block Coding)으로 전송하여 통신의 품질을 보장하는 하이브리드 시스템에 대해서 연구를 진행하였다. 제안 시스템의 성능을 검증 하기 위하여 컴퓨터 시뮬레이션을 수행하였고, 제안 시스템의 성능이 기존 시스템과 비교하여 향상된 것을 볼 수 있다.

목차

요약
Abstract
1. 서론
2. 가시광통신 시스템
2.1 6G에서의 가시광통신 활용
2.2 LED 혼합 비율에 따른 성능
2.3 가시광통신 시스템 개요
2.4 가시광통신 시스템 채널
3. 하이브리드 전송기법
4. 제안시스템의 성능 실험 및 분석
4.1 모의 실험 환경
4.2 모의 실험 결과
5. 결론
REFERENCES

키워드

가시광통신 조명 백색 LED 혼합비율 STBC 무선광통신 6G Visible light communication Lighting white LED Mixing ratio STBC Wireless light communication 6G

저자

  • 이규진 [ Kyu-Jin Lee | 세명대학교 전자공학과 교수 ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    대한산업경영학회 [Dae Han Society of Industrial Management]
  • 설립연도
    2003
  • 분야
    복합학>과학기술학
  • 소개
    본 학회는 산업체·학계·연구소 등의 회원 상호간에 정보교환 및 지원을 통하여 산업경영에 관한 학문발전을 도모하고 산학에 관한 긴밀한 네트워크를 형성하여 기업의 경쟁력을 강화시키는데 그 설립 목적을 두고 있다.

간행물

  • 간행물명
    산업융합연구(구 대한산업경영학회지) [Journal of Industrial Convergence]
  • 간기
    월간
  • pISSN
    2635-8875
  • 수록기간
    2003~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 323 DDC 338

이 권호 내 다른 논문 / 산업융합연구(구 대한산업경영학회지) 제22권 제2호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장