Earticle

초록

영어

Background: A nondestructive test is commonly used to inspect the surface defects and internal structure of an object without any physical damage. X-rays generated from an electron accelerator or a tube are one of the methods used for nondestructive testing. The high penetration of X-rays through materials with low atomic numbers makes it difficult to discriminate between these materials using X-ray imaging. The interaction characteristics of neutrons with materials can supplement the limitations of X-ray imaging in material discrimination. Materials and Methods: The radiation image acquisition process for air-cargo security inspection equipment using X-rays and neutrons was simulated using a GEometry ANd Tracking (Geant4) simulation toolkit. Radiation images of phantoms composed of 13 materials were obtained, and the R-value, representing the attenuation ratio of neutrons and gamma rays in a material, was calculated from these images. Results and Discussion: The R-values were calculated from the simulated X-ray and neutron images for each phantom and compared with those obtained in the experiments. The R-values obtained from the experiments were higher than those obtained from the simulations. The difference can be due to the following two causes. The first reason is that there are various facilities or equipment in the experimental environment that scatter neutrons, unlike the simulation. The other is the difference in the neutron signal processing. In the simulation, the neutron signal is the sum of the number of neutrons entering the detector. However, in the experiment, the neutron signal was obtained by superimposing the intensities of the neutron signals. Neutron detectors also detect gamma rays, and the neutron signal cannot be clearly distinguished in the process of separating the two types of radiation. Despite these differences, the two results showed similar trends and the viability of using simulation-based radiation images, particularly in the field of security screening. With further research, the simulation-based radiation images can replace ones from experiments and be used in the related fields. Conclusion: The Korea Atomic Energy Research Institute has developed air-cargo security inspection equipment using neutrons and X-rays. Using this equipment, radiation images and Rvalues for various materials were obtained. The equipment was reconstructed, and the R-values were obtained for 13 materials using the Geant4 simulation toolkit. The R-values calculated by experiment and simulation show similar trends. Therefore, we confirmed the feasibility of using the simulation-based radiation image.

목차

ABSTRACT
Introduction
Materials and Methods
1. Air-Cargo Security Inspection Equipment
2. Simulations
Results and Discussion
Conclusion
Conflict of Interest
Acknowledgements
Ethical Statement
Author Contribution
References

키워드

저자

• Jaehyun Lee [ Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup, Korea ] Corresponding Author
• Jinhyung Park [ Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup, Korea ]
• Jae Yeon Park [ Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup, Korea ]
• Moonsik Chae [ Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup, Korea ]
• Jungho Mun [ Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup, Korea ]
• Jong Hyun Jung [ Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup, Korea ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  방사선방어학회지 [Journal of Radiation Protection and Research]

• 간기

  계간

• pISSN

  2508-1888

• 수록기간

  1976~2026

• 등재여부

  KCI 등재,SCOPUS

• 십진분류

  KDC 559 DDC 629