Earticle

현재 위치 Home

카본블랙 제조공정의 안전성 향상에 관한 연구
A Study on the Safety Improvement of Carbon Black Manufacturing Process

첫 페이지 보기
  • 발행기관
    대한안전경영과학회 바로가기
  • 간행물
    대한안전경영과학회지 KCI 등재 바로가기
  • 통권
    제25권 제4호 (2023.12)바로가기
  • 페이지
    pp.153-161
  • 저자
    주종율, 정필훈, 이성은
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A439779

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
Carbon black is a material in the form of fine black powder obtained by incomplete combustion or pyrolysis of hydrocarbons, and is composed of 90-99% carbon, and the rest is composed of hydrogen and oxygen. In the event of an emergency during the manufacture of carbon black, the generated tail gas should be safely discharged through an emergency line to prevent fire, explosion, and environmental pollution accidents caused by the tail gas. If the pressure continues to rise, the pressure control valve shall operate and the rupture plate shall be ruptured sequentially and the tail gas shall be discharged to the vent stack through the emergency line. As an emergency emission system, even if some untreated substances in the tail gas are released into the atmosphere, they are lighter than air, so it is safe to discharge them to a safe place through the Vent Stack. If the gas pressure is rising or worse, it is discharged from the Vent Stackine, and discharging fuel.

목차

Abstract
1. 서론
2. 이론적 배경
2.1 법적 기준
2.2 공정 절차
2.3 테일 가스 유해·위험성(MSDS)
2.4 정상운전 절차
3. 연구 방법
3.1 연구 대상공정
3.2 사고발생 원인
3.3 안전성 향상 방안
4. 결론
5. References

키워드

Carbon Black Manufacturing Process Emergency discharge treatment facilities Emergency Emission Solutions

저자

  • 주종율 [ Joo, Jong-Yul | 호서대학교 소방방재학과 ]
  • 정필훈 [ Jeong Phil-Hoon | 숭실사이버대학교 산업안전공학과 ]
  • 이성은 [ Sung-Eun, Lee | 호서대학교 소방방재학과 ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    대한안전경영과학회 [Korea Safety Management & Science]
  • 설립연도
    1999
  • 분야
    공학>안전공학
  • 소개
    안전경영에 관한 학문과 기술을 발전,보급,응용하여 안전기술 및 관리기술의 진흥에 공헌하며, 재해예방을 통한 안전사회의 구현을 그 목적으로 함.

간행물

  • 간행물명
    대한안전경영과학회지 [Journal of Korea Safety Management & Science]
  • 간기
    계간
  • pISSN
    1229-6783
  • eISSN
    2288-1484
  • 수록기간
    1999~2025
  • 십진분류
    KDC 530 DDC 620

이 권호 내 다른 논문 / 대한안전경영과학회지 제25권 제4호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장