Earticle

초록

영어

Sustainable energy supplies without the recharging and replacement of the charge storage device have become increasingly important. Among various energy harvesters, the triboelectric nanogenerator (TENG) has attracted considerable attention due to its high instantaneous output power, broad selection of available materials, eco-friendly and inexpensive fabrication process, and various working modes customized for target applications. In this study, the amount of voltage and current generated was measured by applying the PSD profile random vibration test of the electronic vibration tester and ISTA 3A according to the time of Anodized Aluminum Oxide (AAO) pore widening of the manufactured TENG device Teflon and AAO. The discharge and charging tests of the integrated module during the random simulated transport environment and the recognition distance of RFID were measured while agricultural products (onion) were loaded into the returnable folding plastic box. As a result, it was found that AAO alumina etching processing time to maximize TENG performance was optimal at 31 min in terms of voltage and current generation, and the integrated module applied with the TENG module showed a charging effect even during the continuous use of RFID, so the voltage was kept constant without discharge. In addition, the RFID recognition distance of the integrated module was measured as a maximum of 1.4 m. Therefore, it was found that the surface condition of AAO, a TENG element, has a great influence on the power generation of the integrated module, and due to the characteristics of TENG, the power generation increases as the surface dries, so it is judged that the power generation can be increased if the surface drying treatment (ozone treatment, etc.) of AAO is applied in the future.

목차

Abstract
서론
재료 및 방법
1. TENG 제작
2. TENG 및 RFID 통합모듈 제작
3. TENG 및 RFID 통합모듈의 충전 시험평가
결과 및 고찰
1. TENG의 발전특성
2. 통합모듈의 충전 특성 및 인식거리
결론
감사의 글
참고문헌

키워드

저자

• 박종민 [ Jong-Min Park | Dept. of Bio-industrial Machinery Engineering, Pusan National University ]
• 정현모 [ Hyun-Mo Jung | Dept. of Logistics Packaging, Kyongbuk Science College ] Corresponding author

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  한국포장학회지 [Journal of Korea Society of Packaging Science & Technology]

• 간기

  연3회

• pISSN

  1226-0207

• 수록기간

  1994~2026

• 등재여부

  KCI 등재

• 십진분류

  KDC 530 DDC 620