Design Shape of Combining the Uniform Layer Cut and Graduated Cut according to the Length, Head Area Division, and Slice Line
유니폼 레이어와 그래쥬에이션 커트의 혼합커트의 길이, 두상영역분할 및 슬라이스 라인에 따른 디자인 형태에 관한 연구
Purpose: This study focused on the combination of uniform layer cut and graduated cut to provide basic data on haircuts by demonstrating design changes according to the hair length, head area division, and slice lines. Methods: The head area was divided into the top golden medium point, golden point, and golden back medium point. The upper part of the head was used for the graduated cut with a head angle of 75°, and the lower part was used for the uniform layer cut with a head angle of 90°. Slice line A, parallel line, and V-line were applied only to the top of the head. The cut was started based on the sites 15, 20, and 25 cm from the nape point. Results: The A line became longer as the hair length reached the face line. Consequently, the face and neck lines were covered, and the weight, volume, and expansion were increased. The V-line became shorter, as the hair length reached the face line. Thus, the face and neck lines are prominent, and the volume feeling is increased because of the curling phenomenon. As the point of the head area division increased, the hair length became shorter, and volume and vitality increased. As the point of the head area division went down, the hair length became longer, and the volume, weight, and expansion increased. A graduated high angle of treatment was formed by the lightness at the bottom and the volume by the weight line at the top. The uniform layer showed a rough texture with rhythm, lightness, and round shape. Conclusion: The top and golden points where the head shape protrudes during cutting should be cut more precisely. The cut line is not slick as the incline is severe. Combing and posture are more important than cutting. When combing once, exercise care when combing from the roots, and during cutting, stand in front of the body while changing the body’s position. This study verified creative haircuts.
한국어
목적: 본 연구는 유니폼 레이어와 그래쥬에이션 커트의 혼합 형태이다. 길이, 두상영역분할, 슬라이스 라인에 따른 디자인 변화를 실증하여 헤어커트 기초자료로 제공하는데 목적이 있다. 방법: 탑 골든 미디엄 포인트, 골든 포인트, 골든 백 미디엄 포인트를 기점 으로 두상을 상단과 하단으로 구분하였다. 두상 상단을 그래쥬에이션 커트로 두상시술각도 75°, 두상 하단은 유니폼 레이어 커트로 두상시술각도 90°를 사용하였다. 슬라이스 라인 A라인, 평행라인, V라인은 두상 상단에만 적용하였다. 두상 하단 포인트 기준점은 네이프 포인트에서 15 cm, 20 cm, 25 cm를 기준으로 커트를 시작하였다. 결과: A라인은 모발 길이가 얼굴 라인으로 갈수록 길어 졌다. 그로 인해 얼굴선과 목선은 가려지고 무게감, 부피감, 팽창감이 증가하였다. V라인은 모발 길이가 얼굴 라인으로 갈수록 짧아 졌다. 그로 인해 얼굴선과 목선이 돋보이고 안 말음 현상으로 인해 볼륨감은 증가하였다. 두상영역분할 지점이 올라갈수록 모발 길 이는 짧아져 볼륨감, 생동감은 증가하였다. 두상영역분할 지점이 내려갈수록 모발 길이는 길어져 부피감, 무게감, 팽창감은 증가하 였다. 그래쥬에이션 높은 시술각도는 아래쪽은 가벼움과 위쪽은 무게 선에 의해 볼륨감이 형성되었다. 유니폼 레이어는 율동감과 가벼움, 둥근 형태로 거친 질감이 나타났다. 결론: 커트 시 두상 형이 튀어 나온 탑 포인트, 골든 포인트는 더 정교하게 커트해야 한 다. 경사도가 심하므로 커트 선이 매끄럽게 않을 수 있다. 커트는 자르는 것보다 빗질과 자세가 중요하다. 한 번 빗질할 때 뿌리에서 부터 꼼꼼히 하고 커트할 때 몸의 위치를 변동해가면서 정면에 서서 잘라야 한다. 이상으로 창의적인 헤어커트에 관한 연구를 실증 하였다.