Earticle

현재 위치 Home

통신

EMC 시험을 위한 EUT 시험장비 설계
Design of EUT test equipment for EMC Testing

첫 페이지 보기
  • 발행기관
    국제인공지능학회(구 한국인터넷방송통신학회) 바로가기
  • 간행물
    한국인터넷방송통신학회 논문지 KCI 등재 바로가기
  • 통권
    제23권 제4호 (2023.08)바로가기
  • 페이지
    pp.35-40
  • 저자
    김홍락, 김윤진, 박성호, 이만희
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A435349

※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.

원문정보

초록

영어
For the EMC test, the radiation characteristics and immunity characteristics of the EUT are measured under the condition that the EUT maintains its normal operation. For normal operation of the EUT, it is necessary to operate the EUT and monitor its status through separate equipment outside the anechoic chamber. External equipment operates and monitors the EUT through various communications such as 1553B communication, RS-485 communication, and Ethernet communication. At this time, external equipment can transmit noise through the communication line. This noise is transmitted to the LISN through the connected power cable and measured. It is also radiated through the connection terminal to the LISN. In this case, the communication line is the power line It should be designed so that noise is not transmitted through electromagnetic isolation as much as possible. In addition, noise from external equipment must be suppressed as much as possible from entering the chamber through the communication line. In this paper, external EUT test equipment applied for EMC test It explains the considerations in the design and manufacture of the design and explains the satisfaction of the design through tests including CE and RE.
한국어
EMC 시험을 위해서는 EUT가 정상적인 동작을 유지하고 있는 상황에서 EUT의 방사 특성과 내성 특성을 측정하 게 된다. EUT의 정상적인 동작을 위해서는 무반향 챔버 외부에서 별도의 장비를 통하여 EUT를 동작시키고 상태를 모니 터링해야 한다. 외부 장비는 1553B 통신, RS-485 통신, Ethernet 통신 등 다양한 통신을 통하여 EUT를 동작시키고 모니터링을 하게 된다. 이때 외부 장비가 통신 LINE을 통하여 잡음을 전달할 수 있다. 이러한 잡음은 연결된 전원케이블 을 통하여 LISN에 전달되어 측정되게 된다. 또한 LISN에 연결단자를 통하여 방사되기도 한다. 이러한 경우 통신 LINE 이 전원 LINE과 최대한 전자기적 격리를 통하여 잡음이 전달되지 못하도록 설계하여야 한다. 또한 외부 장비의 잡음이 통신 LINE을 통하여 챔버안으로 들어가는 것을 최대한 억압하야여 한다. 본 논문에서는 EMC 시험을 위하여 적용되는 외부의 EUT 시험장비의 설계 및 제작시 고려사항들에 대하여 설명하고 CE, RE를 포함한 시험을 통하여 설계 만족에 대하여 설명한다.

목차

요약
Abstract
Ⅰ. 서론
Ⅱ. EMC 설계
1. 시험 셋업
1. 사전 점검 시험
2. 디버깅
3. 재 시험
Ⅲ. 결론
References

키워드

EUT 1553B RS-485 Ethernet EMS(Electromagnetic Susceptibility) CE RE

저자

  • 김홍락 [ Hong-Rak Kim | 정회원, LIG넥스원(주) PGM탐색기연구소 ] 교신저자
  • 김윤진 [ Youn-Jin Kim | 정회원, LIG넥스원(주) PGM탐색기연구소 ]
  • 박성호 [ Seong-Ho Park | 정회원, LIG넥스원(주) PGM탐색기연구소 ]
  • 이만희 [ Man-Hee Lee | 정회원, LIG넥스원(주) PGM탐색기연구소 ]

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    국제인공지능학회(구 한국인터넷방송통신학회) [The International Association for Artificial Intelligence]
  • 설립연도
    2000
  • 분야
    공학>전자/정보통신공학
  • 소개
    인터넷방송, 인터넷 TV , 방송 통신 네트워크 및 관련 분야에 대한 국내는 물론 국제적인 학술, 기술의 진흥발전에 공헌하고 지식 정보화 사회에 기여하고자 한다.

간행물

  • 간행물명
    한국인터넷방송통신학회 논문지 [The Journal of the Institute of Internet, Broadcasting and Communication]
  • 간기
    격월간
  • pISSN
    2289-0238
  • eISSN
    2289-0246
  • 수록기간
    2001~2025
  • 십진분류
    KDC 326 DDC 380

이 권호 내 다른 논문 / 한국인터넷방송통신학회 논문지 제23권 제4호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장