Nickel(Ⅱ) nitrate hexahydrate를 전구체로 사용한 산화니켈(NiO) 나노입자의 합성
Synthesis of Nickel Oxide (NiO) nanoparticles using nickel(Ⅱ) nitrate hexahydrate as a precursor
Nickel oxide (NiO) nanoparticles were successfully synthesized by a simple liquid phase process for producing ceramics powder using a precursor impregnated with a nickel(Ⅱ) nitrate hexahydrate aqueous solution in an industrial pulp. The microfibrile structure of the precursor impregnated with nickel nitrate hexahydrate aqueous solution was confirmed by scanning electron microscope (SEM), and the crystal structure and particle size of nickel oxide (NiO) particles produced as the heat treatment temperature of the precursor were analyzed by X-ray diffraction (XRD) and SEM. As a result, it was confirmed through XRD and SEM analysis that the temperature at which the organic material of the precursor is completely thermally decomposed was 495-500°C, and the size and crystallinity of the nickel oxide particles produced increased as the heat treatment temperature increased. The size of the nickel oxide particles obtained by heat treatment at 500-800°C for 1 hour was 50-200 nm. It was confirmed by XRD and SEM analysis that a NiO crystal phase was formed at a heat treatment temperature of 380°C, only a single NiO phase existed until 800°C.
한국어
질산니켈육수화물염(nickel(Ⅱ) nitrate hexahydrate) 수용액을 공업용 펄프에 함침시킨 전구체를 이용하여 세라믹스 분 말을 제조하는 간단한 액상 합성법으로 산화니켈(NiO) 나노입자를 성공적으로 합성하였다. 질산니켈육수화물염 수용액이 함침 된 전구체의 미세구조를 주사전자현미경(SEM)으로 확인하였고, 전구체의 열처리온도 증가에 따라 생성되는 산화니켈(NiO) 입 자의 결정구조 및 입자크기를 X선회절분석(XRD) 및 SEM으로 분석하였다. 그 결과 전구체의 유기물질이 완전하게 열분해 되 는 온도는 495-500°C이며, 열처리 온도의 증가에 따라 생성되는 산화니켈 입자의 크기 및 결정성이 증가하는 것을 XRD, SEM 분석을 통하여 확인하였다. 500-800℃에서 각각 1시간 동안 열처리하여 얻어진 산화니켈 입자의 크기는 50-200nm였다. 열처리 온도 380℃에서 NiO 결정상이 형성되고, 800℃까지는 NiO 단일상만 존재하며, 열처리 온도가 높아짐에 따라 생성되는 입자의 크기가 커지고 있음을 XRD 및 SEM 분석으로 확인하였다.
목차
요약 Abstract Ⅰ. 서론 Ⅱ. 실험 1. NiO 나노입자의 제조 2. 분석 Ⅲ. 결과 및 고찰 Ⅳ. 결론 References
국제문화기술진흥원 [The International Promotion Agency of Culture Technology]
설립연도
2009
분야
공학>공학일반
소개
본 진흥원은 문화기술(Culture Technology) 관련 산·학·연·관으로 구성된 비영리 단체이다. 문화기술(CT)은 정보통신기술(ICT), 문화적 사고 기반의 예술, 인문학, 디자인, 사회과학기술이 접목된 신융합기술(New Convergence Technology, NCT)로 정의한다. 인간의 삶의 질을 향상시키고, 진보된 방향으로 변화시키고, 문화기술 관련 분야의 학술 및 기술의 발전과 진흥에 공헌하기 위하여, 제3조의 필요한 사업을 행함을 그 목적으로 한다.
간행물
간행물명
The Journal of the Convergence on Culture Technology (JCCT) [문화기술의 융합]
간기
격월간
pISSN
2384-0358
eISSN
2384-0366
수록기간
2015~2025
등재여부
KCI 등재
십진분류
KDC 600DDC 700
이 권호 내 다른 논문 / The Journal of the Convergence on Culture Technology (JCCT) Vol.9 No.3