Earticle

현재 위치 Home

기술 융합(TC)

체압 센서를 이용한 의료용 침대의 원격 케어
Remote Care Using Medical Bed System Equipped With Body Pressure Sensors

첫 페이지 보기
  • 발행기관
    국제문화기술진흥원 바로가기
  • 간행물
    The Journal of the Convergence on Culture Technology (JCCT) KCI 등재 바로가기
  • 통권
    Vol.9 No.1 (2023.01)바로가기
  • 페이지
    pp.619-625
  • 저자
    정재혁, 복상현, 임준희, 오보경, 이영대
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A426163

※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.

원문정보

초록

영어
In this paper, the remote care of medical beds with multiple body pressure sensors is described. Falling is one of the factors that seriously threaten the safety of patients and harm their health. In this study, a new bed was developed to overcome this. The bed system consists of a keyboard that can operate, a keyboard controller that manages the movement of the keyboard, a sensor that measures body pressure, a sensor controller that transmits and receives sensor values, a main controller that checks it and operates automatically or manually according to the algorithm, and a server that oversees all these information. The bed system checks the patient's location through a sensor and wirelessly alerts the server through the main controller when the patient determines that there is a risk of falling, so that the nurse or nurse can recognize the patient's dangerous condition. The server may receive state data transmitted from the wired/wireless terminal to monitor whether the bed system is operating normally. The controller of the keyboard operates a keyboard-type mechanism and automatically controls the prevention of bedsores connected by body pressure sensors to physically separate the area to which the patient's pressure is applied to prevent bedsores. The main controller checks the presence of the patient's bed and transmits it to the server. In conclusion, the proposed system can smart monitor the user's state and perform remote care.
한국어
본 논문에서는 다수의 체압 센서가 내장된 의료용 침대의 원격 케어에 관해 기술한다. 낙상은 환자의 안전을 심각하게 위협하고 건강을 해치는 요인중의 하나이다. 본 연구에서는 이를 극복하기 위해 새로운 침대가 개발하였다. 침대 시스템은 동작이 가능한 건반, 건반의 동작을 관리하는 건반 제어기, 체압을 측정하는 센서, 센서의 값을 송수신 하는 센서 제어기, 이를 확인하여 알고리즘에 따라 자동 혹은 수동으로 동작하게 하는 메인 제어기, 이 모든 정보를 총괄하는 서버로 이루어져 있다. 침대 시스템은 센서를 통해 환자의 위치를 확인하여 환자가 낙상의 위험이 있다고 판단하게 되면 메인 제어기를 통해 무선으로 서버에 경고를 보내 간호인 혹은 간호사가 환자의 위험한 상태를 인지 할 수 있도록 한다. 서버는 유무선 단말에서 송신된 상태 데이터를 전송받아 침대 시스템이 정상적으로 동작하고 있 는지 모니터링할 수 있다. 건반의 제어기는 건반형 메커니즘을 구동하고 체압 센서가 연결된 욕창 예방 제어를 자동 으로 행하여 환자의 압력이 가해지는 부위를 물리적으로 분리해 욕창을 예방한다. 메인 제어기는 환자의 침상 존재를 확인하여 서버에 전송한다. 결론적으로 제안된 시스템은 사용자의 상태를 스마트 모니터링하고 원격 케어를 행할 수 있게 된다.

목차

요약
Abstract
Ⅰ. 서론
Ⅱ. 시스템 하드웨어 구성
2-1. 시스템 구성
2-2. 건반 메커니즘
2-3. FSR 센서
2-4. 통합 드라이버
2-5. 메인 제어기
2-6. 서버 및 단말기
Ⅲ. 시스템 소프트웨어 구성
3-1. 욕창 예방 알고리즘
3-2. 낙상 감지 알고리즘
3-3. 환자 존재 파악 알고리즘
Ⅳ. 구현 및 제작 실험
Ⅴ. 결론
References

키워드

스마트 의료용 침대 체압 센서 건반 낙상 원격케어 Smart Medical Bed Body Pressure Sensor Keyboard Falling Remote

저자

  • 정재혁 [ Jaehyeok Jeung | 정회원, ㈜나인벨 헬스캐어 ] 공동저자
  • 복상현 [ Sanghyun Bok | 정회원, ㈜나인벨 헬스캐어 ] 공동저자
  • 임준희 [ Junhee Lim | 정회원, ㈜나인벨 헬스캐어 ] 공동저자
  • 오보경 [ Bokyung Oh | 정회원, ㈜나인벨 헬스캐어 ] 공동저자
  • 이영대 [ Youngdae Lee | 종신회원, ㈜나인벨 연구소장 ] 교신저자

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    국제문화기술진흥원 [The International Promotion Agency of Culture Technology]
  • 설립연도
    2009
  • 분야
    공학>공학일반
  • 소개
    본 진흥원은 문화기술(Culture Technology) 관련 산·학·연·관으로 구성된 비영리 단체이다. 문화기술(CT)은 정보통신기술(ICT), 문화적 사고 기반의 예술, 인문학, 디자인, 사회과학기술이 접목된 신융합기술(New Convergence Technology, NCT)로 정의한다. 인간의 삶의 질을 향상시키고, 진보된 방향으로 변화시키고, 문화기술 관련 분야의 학술 및 기술의 발전과 진흥에 공헌하기 위하여, 제3조의 필요한 사업을 행함을 그 목적으로 한다.

간행물

  • 간행물명
    The Journal of the Convergence on Culture Technology (JCCT) [문화기술의 융합]
  • 간기
    격월간
  • pISSN
    2384-0358
  • eISSN
    2384-0366
  • 수록기간
    2015~2025
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 600 DDC 700

이 권호 내 다른 논문 / The Journal of the Convergence on Culture Technology (JCCT) Vol.9 No.1

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장