Recently, as people spend more time indoors, the importance of indoor air quality is recognized. In addition, in order to save energy and increase efficiency, the indoor space is becoming more and more airtight, and the demand for improvement of indoor air quality is increasing. In this study, the filtration performance of the EPA filter, which is mainly used to remove fine dust, and the ACF filter, which is mainly used for removing harmful gases, in an air purifier for improving indoor air quality was compared. In addition, the results were derived and presented in a numerical analysis method through flow analysis of the air flow and pressure drop through each fibrous filter. In conclusion, the fibers constituting the ACF filter are thinner than the support layer fibers constituting the EPA filter and thicker than the filter layer fibers of the EPA filter. It was confirmed through the flow that the air permeability and pressure loss were low compared to the EPA filter because the pores formed by this were relatively large. In addition, it was confirmed that the filtration rate varies according to the pleated angle at the front end of the filter medium. This means that it is necessary to check the optimal filter characteristics in consideration of the effect between filtration efficiency and pressure drop when applying a bending type filter in terms of improving the efficiency of the air purifier. This study is intended to be used as a method for effectively converging EPA filters and ACF filters to improve indoor air quality in the future.
한국어
최근 실내에서 생활하는 시간이 증가됨에 따라 실내공기질의 중요성을 인식하고 있다. 또한, 에너지 절감 및 효율을 높이기 위해 실내공간은 점점 밀폐화 되고 있어 실내공기질에 대한 개선 요구가 증가하고 있다. 실내공 기질 개선을 위한 공기정화기에서 미세먼지 제거를 위해 주로 사용되는 EPA(Efficient Particulate Air Filter) 필 터와 실내 유해가스 제거를 위해 주로 사용되는 ACF 필터의 여과성능을 비교하고자 본 연구를 시작하였다. 각 섬 유상 필터를 통한 공기 흐름과 압력 강하를 유동해석을 통해 수치해석 방식으로 도출하여 제시하였다. 결론적으로, ACF 필터를 구성하고 있는 섬유는 EPA 필터를 구성하고 있는 지지층 섬유보다 얇고 EPA 필터의 여과층 섬유보 다는 굵은 특성이 있어 형성되는 기공이 상대적으로 크게 형성되는 특성이 있어 EPA 필터에 비해 공기투과도과 높으면서, 압력손실도 낮게 나타나는 것을 공기의 흐름을 통해 확인하였다. 또한, 여과속도는 여과재 전단에 절곡된 각도에 따라 유속의 특성이 달라지는 것을 확인할 수 있었으며, 이는 공기정화기 효율향상의 측면에서 절곡형 필터 적용시, 여과효율과 압력강하 간의 영향을 고려한 최적의 필터 특성을 확인하여야 하는 것으로 보인다. 본 연구를 향후 실내공기질 개선을 위한 EPA 필터와 ACF 필터를 효과적으로 융합하는 방안으로 활용하고자 한다.
목차
요약 Abstract Ⅰ. 서론 Ⅱ. 실험방법 2.1 실험재료 2.2 장치 및 방법 2.3 수치해석 Ⅲ. 결과 및 고찰 3.1 필터 내부 형상 및 고찰 3.2 수치해석 결과 및 고찰 3.3 필터 형상이 압력강하에 미치는 영향 Ⅳ. 결론 REFERENCES
Ever since next generation convergence technology became one of the most important industries in the nation, computing professionals have encountered a growing number of challenges. Along with scholars and colleagues in related fields, they have gathered in avariety of forums and meetings over the last few decades to share their knowledge, experiences and the outcome of their research. These exchanges have led to the founding of the International Next-generation Convergence technology (INCA) on December 1, 2015. INCA was registered as an incorporated association under the Ministry of Information and Communications. The main purpose of the organization is to improve our society by achieving the highest capability possible in next generation convergence technology.
간행물
간행물명
차세대융합기술학회논문지 [The Journal of Next-generation Convergence Technology Association]