※ 기관로그인 시 무료 이용이 가능합니다.
※ 학술발표대회집, 워크숍 자료집 중 4페이지 이내 논문은 '요약'만 제공되는 경우가 있으니, 구매 전에 간행물명, 페이지 수 확인 부탁 드립니다.
4,000원
원문정보
초록
영어
Effects of electron beam (EB) irradiation on the mechanical strength of Cu (conducting sheath) and Nb (diffusion barrier) of Cu/Nb/MgB2 superconducting was investigated. Wire- and tape-type Cu/Nb/MgB2 samples were irradiated at E-beam energy of 2.5 MeV and 5 mA and a maximum E-beam dose was 5x1017 e/m2. The hardness value of Cu and Nb region was measured by the Vickers micro-hardness method. In the case of the wire sample, the hardness of Cu and Nb increased proportionally as the dose was increased up to 5x1017 e/m2, whereas in the case of the tape sample, the hardness increased up to a dose of 0.5x1017 e/m2, and decreased slightly 5x1017 e/m2. The hardness increase of Cu and Nb is believed to be due to the decrease of the deformability of Cu and Nb due to the defects formed inside the materials by E-beam irradiation.
목차
Abstract 1. INTRODUCTION 2. EXPERIMENTS 2.1. Preparation of MgB2 wire and tape. 2.2. E-beam irradiation experiment. 2.3. Vickers micro-hardness test. 3. RESULTS AND DISCUSSION 4. CONCLUSIONS REFERENCES
키워드
MgB2SuperconductorE-beam irradiationCu and NbVickers hardnesswiretape
저자
C.-J. Kim [ Korea Atomic Energy Research Institute, Korea ]
Corresponding Author
T. R. Lee [ Korea University of Technology and Education ]
B.-H. Jun [ Korea Atomic Energy Research Institute, Korea ]