Earticle

초록

영어

In this study, 3D design, vibration analysis and experiment, and feed rate performance test were performed to develop a vibratory bowl feeder for supplying ultra-thin plate parts of less than 50 microns. The natural frequency and resonant frequency of the vibratory bowl feeder were obtained through the vibration analysis and experiment, and it was confirmed that the results of the analysis and experiment agree well. Through the feed rate experiment, it was confirmed that up to 610 ultra-thin parts per minute were fed at 250Hz and a supply voltage of 220V, where the excitation frequency and the resonant frequency match. And through analysis and experimental research, it was confirmed that the development of a vibratory bowl feeder for supplying ultra-thin parts was successful.

목차

ABSTRACT
1. 서론
2. 진동형 볼 피더의 구성
2.1 작동원리
2.2 기본구성
3. 진동형 볼 피더의 진동해석
3.1 유한요소 모델 및 해석방법
3.2 진동해석 결과
4. 진동형 볼 피더의 진동 특성 실험
5. 진동형 볼 피더의 이송률 성능실험
6. 결론
References

키워드

진동형 볼 피더 이송률 고유 주파수 공진 모드 해석 마스크 Vibratory bowl feeder Feed rate Natural frequency Resonance Modal analysis Mask

저자

• 김나용 [ Na-Yong Kim | Departmentof Automotive Engineering, Graduate School, Gyeongsang National University ]
• 배강열 [ Kang-Yul Bae | School of Mechatronics Engineering, Gyeongsang National University ]
• 김봉환 [ Bong-Hwan Kim | Member, Departmentof Automotive Engineering, Gyeongsang National University ] Corresponding author

참고문헌

발행기관

간행물