Prediction of Pressure Drop Variance According to Installation of Venturi in Pulse Air Jet Type Bag Filter Using Linear-Linear Multiple Regression Analysis
선형-선형 다중회귀분석을 이용한 충격기류식 여과집진장치에서 벤츄리 설치가 압력손실에 미치는 영향
The aim of this study is to predict the pressure drop due to the presence or absence of Venturi under various operating conditions such as filtration velocity, pulse pressure and interval, and dust concentration using linear-linear regression model and use it as an efficient operating condition and economic data for a shock-type filter collection system. A pilot filtration collector with a filter area of 6 m2 was used, and the filtering pressure drop was measured according to filtration velocity, inlet concentration, pulse pressure, pulse interval, and the flow and absence conditions of the Venturi installation by a steel plant. The SAS 9.4 program (SAS Institute, USA) was used to predict and to determine the effects of filtration velocity (Vf), inlet concentration (Ci), pulse pressure (Pp) and interval (Pi), presence or absence of venturi, etc. and also analyze the changes in pressure drop according to the presence of Venturi using the linear-linear multiple regression model, and the least-squares estimation method (OLS). The results re shown below. In order to minimize the pressure drop, the improvement in efficiency is expected to be 20.3% when the Venturi is installed, and the order of contributing to the pressure drop is filtration rate> pulse pressure> inlet concentration> pulse interval.
한국어
본 연구는 선형-선형 다중회귀모형을 통해 여과속도, 탈진압력, 탈진간격, 입구농도 등의 운전조건에서 벤츄리 설치가 압력손실에 미치는 영향을 예측하여 충격기류식 여과집진장치의 효율적인 운전조건과 경제적인 설계 기초자료로 활용하 고자 하였다. 여과면적 6 m2인 파이로트형 충격기류식 여과집진장치를 이용하여 제철소 coke분진으로 여과속도, 입구농 도, 탈진압력, 탈진간격 및 벤츄리 설치 유·무의 조건에 따라 여과포 압력손실을 측정하였으며, 여과포 압력손실(P)의 변화에 기여하는 여과속도(Vf), 입구농도(Ci), 탈진압력(PP), 탈진간격(Pi), 벤츄리 설치 유·무 등에 따른 영향력을 파악하 기 위해 SAS 9.4(SAS Institute, USA) 프로그램으로 통상적인 최소자승 추정법(Ordinary Least Square; OLS)인 선형-선 형의 다중회귀모형 함수를 이용하여 벤츄리가 압력손실에 미치는 영향을 예측하였다. 예측 결과를 종합해 보면 압력손실 최소화를 위해서 벤츄리를 설치할 경우 20.3% 효율 향상이 기대되며, 압력손실에 기여하는 순서는 여과속도(Vf) > 탈진 압력(Pp) > 입구농도(Ci) > 탈진간격(Pi)임을 알 수 있었다.
목차
Abstract 요약문 I. 서론 II. 연구 방법 1. 실험 재료 2. 실험 장치 3. 실험방법 III. 연구결과 1. 모형의 적합성 검정과 설명 변수의 유의성 검정 2. 선형-선형 다중회귀분석 모형을 통한 예측 IV. 결론 사사 References
키워드
여과집진장치벤츄리다중선형회귀모형압력손실Bag Filterventurimultiple linear regression modelpressure drop
저자
Moon-Sub Jung [ 정문섭 | Department of Bioenvironmental Energy, Pusan National University ]
Kyeong-Min Jang [ 장경민 | Department of Bioenvironmental Energy, Pusan National University ]
Jeong Min Suh [ 서정민 | Department of Bioenvironmental Energy, Pusan National University ]
Corresponding Author
한국도시환경학회 [The Korean Society of Urban Environment]
설립연도
2001
분야
공학>환경공학
소개
산업화와 도시 집중화 및 교통의 증가에 따른 각종 공해 물질의 증가에 의하여 우리들이 살고 있는 도시환경은 오염되고 있을 뿐만 아니라 도시 생태계가 파괴되어 가고 있다. 이에 따라 우리들의 생산활동이나 공공교통 그리고 일상생활에서 발생하는 대기오염, 수질오염, 토양오염, 폐기물, 소음 및 진동 그리고 그 밖의 오염원으로부터 발생되는 오염물질 등은 인간의 건강 및 생명에 유해하며 나쁜 영향을 미칠 수 있으므로 이를 방지하기 위한 시급한 대처가 요구된다.
이러한 시대적 요청에 따라 본 한국도시환경학회는 도시환경과 관련된 모든 문제를 조사연구함으로써 도시환경학문의 발전과 응용 및 보급에 기여하고 나아가 사회 발전에 이바지함을 목적으로 설립되었다.
간행물
간행물명
한국도시환경학회지 [Journal of the Korean Society of Urban Environment]