Earticle

현재 위치 Home

디바이스와 모듈

연료전지 발전시스템 구현을 위한 전력변환장치 하드웨어 세부설계
Detailed Design of Power Conversion Device Hardware for Realization of Fuel Cell Power Generation System

첫 페이지 보기
  • 발행기관
    국제인공지능학회(구 한국인터넷방송통신학회) 바로가기
  • 간행물
    한국인터넷방송통신학회 논문지 KCI 등재 바로가기
  • 통권
    제22권 제1호 (2022.02)바로가기
  • 페이지
    pp.135-140
  • 저자
    윤용호
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A408813

※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.

원문정보

초록

영어
In addition to the stack that directly generates electricity by the reaction of hydrogen and oxygen, the fuel cell power generation system has a reformer that generates hydrogen from various fuels such as methanol and natural gas. It also consists of a power converter that converts the DC voltage generated in the stack into a stable AC voltage. The fuel cell output of such a system is direct current, and in order to be used at home, an inverter device that converts it into alternating current through a power converter is required. In addition, a DC-DC step-up converter is used to boost the fuel cell voltage to about 30~70V, which is the inverter operating voltage, to about 380V. The DC-DC step-up converter is a DC voltage variable device that exists between the fuel cell output and the inverter. Accordingly, since a constant output voltage of the converter is generated in response to a change in the output voltage of the fuel cell, the inverter can receive constant power regardless of the voltage change of the fuel cell. Therefore, in this paper, we discuss the detailed hardware design of the full-bridge converter, which is the main power source of the inverter that receives the fuel cell output voltage (30~70V) as an input and is applied to the grid among the members of the fuel cell power generation system.
한국어
연료전지 발전시스템은 수소와 산소의 반응 작용에 의해 직접 전기를 발생하는 스택(Stack) 이외에 메탄올, 천연 가스 등 각종 연료로부터 수소를 만들어 내는 개질기와 스택에서 발전된 직류전압을 안정된 교류전압으로 변환시켜주는 전력변환기 등으로 구성되어진다. 이러한 시스템의 연료전지 출력은 직류로 가정에서 사용하기 위해서는 전력변환장치 를 통하여 교류로 변환시키는 인버터 장치가 필요하다. 또한 연료전지 전압이 30∼70V 정도로 이를 인버터 동작 전압인 380V 정도로 승압하기 위하여 DC-DC 승압형 컨버터를 사용한다. DC-DC 승압형 컨버터는 연료전지 출력과 인버터 사이에 존재하는 직류전압 가변장치로 연료전지 출력전압의 변동에 반응하여 컨버터의 일정 출력전압을 만들어 내므로 인버터는 연료전지의 전압 변동에 무관하게 일정한 전원을 공급 받을 수 있다. 따라서 본 논문에서는 연료전지발전 시스 템의 구성 원 중 연료전지 출력전압(30∼70V)을 입력으로 받아 계통연계에 적용되는 인버터의 주요 전원인 풀 브리지 (Full-Bridge) 컨버터의 하드웨어 세부설계에 대하여 논하고자 한다.

목차

요약
Abstract
Ⅰ. 서론
II. 풀 브리지 컨버터 구성요소 하드웨어설계[4,5]
1. 풀 브리지 컨버터
III. 풀 브리지 컨버터 실험결과
IV. 결론
References

키워드

Fuel Cell Power Generation System Power Conversion Full-Bridge Converter Hardware detailed design

저자

  • 윤용호 [ Yongho Yoon | 정회원, 광주대학교 전기전자공학부 ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    국제인공지능학회(구 한국인터넷방송통신학회) [The International Association for Artificial Intelligence]
  • 설립연도
    2000
  • 분야
    공학>전자/정보통신공학
  • 소개
    인터넷방송, 인터넷 TV , 방송 통신 네트워크 및 관련 분야에 대한 국내는 물론 국제적인 학술, 기술의 진흥발전에 공헌하고 지식 정보화 사회에 기여하고자 한다.

간행물

  • 간행물명
    한국인터넷방송통신학회 논문지 [The Journal of the Institute of Internet, Broadcasting and Communication]
  • 간기
    격월간
  • pISSN
    2289-0238
  • eISSN
    2289-0246
  • 수록기간
    2001~2025
  • 십진분류
    KDC 326 DDC 380

이 권호 내 다른 논문 / 한국인터넷방송통신학회 논문지 제22권 제1호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장