Earticle

현재 위치 Home

<생산기술>

사용기간 경과에 따른 온실용 다겹보온자재의 열환경 및 보온성능 변화 : 촉진 내후성 시험 적용사례
Variation in Thermal Environment and Thermal Insulation Performance of Multi-Layer Thermal Screens for Greenhouse Depending on Service Life : A Case Study of Accelerated Weathering Test

첫 페이지 보기
  • 발행기관
    한국기계항공기술학회(구 한국기계기술학회) 바로가기
  • 간행물
    한국기계항공기술학회지(구 한국기계기술학회지) KCI 등재 바로가기
  • 통권
    제23권 제6호 (2021.12)바로가기
  • 페이지
    pp.1191-1197
  • 저자
    윤성욱, 최덕규, 이시영, 권진경, 김형권, 문종필, 장재경
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A406500

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
In this study, an accelerated weathering test was performed to examine the variation of thermal insulation performance according to the service life. A widely used class 1 thermal screen (matt georgette + polyethylene (PE) foam + chemical cotton + felt + matt georgette) was selected as the target thermal screen. The ultraviolet irradiation that reached the target thermal screen specimen (60 x 60cm) was 5mW/cm2. Thus, the ultraviolet irradiance was set to 5mW/cm2, and the exposure periods of accelerated weathering conditions on the specimens were set to 0, 282, 847, and 1412h. The radiation exposure periods of the weathering conditions for 0, 282, 847, and 1412h indicate the amount of ultraviolet accumulation for 0, 1, 3, and 5years, respectively. In the accelerated weathering test, the target specimens that completed each exposure phase were subjected to the hotbox test to analyze their thermal insulation performances. Consequently, the thermal insulation performance of the multi-layer thermal screen was estimated to degrade rapidly after approximately two years. In the accelerated weathering condition, a quadratic function model was used to calculate the expected service life, since it adequately described the variation in thermal insulation of the thermal screen according to time. The results showed that when the thermal insulation performance degraded by 5, 10, 20, and 30%, the expected service lives were 2.5, 3.3, 4.5, and 5.5years, respectively.

목차

ABSTRACT
1. 서론
2. 촉진내후성시험
2.1 대상 다겹보온자재
2.2 촉진내후성시험장치 제작 및 구성
2.3 시험방법
2.4 다겹보온자재의 보온성능 측정
3. 사용기간에 따른 다겹보온자재의 보온성능 변화
3.1 광 노출시간별 다겹보온자재의 Hot box 내부 온도하강율
3.2 광 노출시간별 다겹보온자재의 열관류율
3.3 광 노출시간별 다겹보온자재의 열전도저항
4. 결론
후기
References

키워드

촉진내후성시험 온실 다겹보온커튼 시설원예 Accelerated weathering test Greenhouse Multi-layer thermal screen Protected horticulture

저자

  • 윤성욱 [ Sung-Wook Yun | Agricultural Researcher, National Institute of Agricultural Science, RDA ]
  • 최덕규 [ Duk-Kyu Choi | Agricultural Researcher, National Institute of Agricultural Science, RDA ]
  • 이시영 [ Si-Young Lee | Member, Agricultural Researcher, National Institute of Agricultural Science, RDA ] Corresponding Author
  • 권진경 [ Jin-Kyung Kwon | Agricultural Researcher, National Institute of Agricultural Science, RDA ]
  • 김형권 [ Hyeong-Kwon Kim | Agricultural Researcher, National Institute of Agricultural Science, RDA ]
  • 문종필 [ Jong-Pil Moon | Agricultural Researcher, National Institute of Agricultural Science, RDA ]
  • 장재경 [ Jae-Kyoung Jang | Agricultural Researcher, National Institute of Agricultural Science, RDA ]

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국기계항공기술학회(구 한국기계기술학회) [Korean Society of Mechanical Technology]
  • 설립연도
    1999
  • 분야
    공학>기계공학
  • 소개
    기계 관련 산업 분야에 관한 학술과 현장 적용 기술을 연구하고 교류하며, 이에 관련된 학문과 기술 발전 및 보급에 기여함으로써 과학과 기술의 진흥에 이바지함을 그 목적으로 한다.

간행물

  • 간행물명
    한국기계항공기술학회지(구 한국기계기술학회지) [Journal of the Korean Society of Mechanical and Aviation Technology ]
  • 간기
    격월간
  • pISSN
    1229-604X
  • eISSN
    2508-3805
  • 수록기간
    1999~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 550 DDC 620

이 권호 내 다른 논문 / 한국기계항공기술학회지(구 한국기계기술학회지) 제23권 제6호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장