Earticle

현재 위치 Home

Groundwater Analysis for Jun Stream Basin in Donghae City using MODFLOW
MODFLOW를 이용한 동해시 전천유역의 지하수분석

첫 페이지 보기
  • 발행기관
    한국습지학회 바로가기
  • 간행물
    한국습지학회지 KCI 등재 바로가기
  • 통권
    제23권 제4호 (2021.11)바로가기
  • 페이지
    pp.342-351
  • 저자
    Sam Eun Kim, Hung Soo Kim
  • 언어
    영어(ENG)
  • URL
    https://www.earticle.net/Article/A404366

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
The objective of this study is to evaluate the change of groundwater and its effect to hydraulic head or parameter sensitivity in order to predict the effect of a new groundwater well using MODFLOW. With the downstream area of the Jun stream basin in the Donghae city, two condition were simulated; (i) First simulation condition is to simulate natural steady-state and the groundwater heads for observation wells are calibrated. After the calibration, existing wells are simulated to find out the pure effect of the next simulation condition, (ii) Secondly, the design wells are planed and simulated for the solution of water shortage problem at Donghae city. As a result of the simulation, the maximum drawdown which is approximately 0.35m occurs in layer 1. This represents that there is no intrusion of salty water and the design plan is acceptable. Finally, the sensitivity analysis of each parameter in MODFLOW is accomplished. We found out that the sensitive parameters are initial head, anisotropic factor, hydraulic conductivity, and general head boundary.
한국어
이 연구의 목적은 MODFLOW를 이용하여 신규 지하수 관정 추가로 인한 영향을 예측하기 위해 지하수의 변화와 지 하수두 또는 매개변수 민감도에 미치는 영향을 평가하는 것이다. 이 연구에서는 동해시의 전천유역 하류지역을 대상 으로 두 가지 조건을 모의하였다. 첫 관측된 지하수위값을 이용하여 자연상태 정류 흐름을 모의 할 수 있는 매개변수 를 결정한 후, 이미 설치되어 있는 관정까지 포함하여 모형을 구축하였다. 구축된 모형을 이용하여 지하수 관정의 추 가 설치에 따른 영향을 모의하였다. 두 번째는 동해시의 물 부족 문제를 해결하기 위한 방법으로 관정을 계획하고 모 의하였다. 모의 결과, 최대 지하수위 저하는 첫 번째 대수층에서 약 0.35m로 나타났으며, 이는 해수의 침입은 발생하 지 않는다는 것과 관정의 계획이 물 부족의 해결책으로 무리가 없다는 것을 나타낸 것이다. 마지막으로 MODFLOW 에서 사용되는 매개변수의 민감도 분석을 실시하였다. 민감도 분석 결과에서 초기 수두, 비등방성 계수, 수리전도도 및 일반수두경계가 민감한 매개변수로 판명되었다.

목차

Abstract
요약
1. Introduction
2. A Modular Three-Dimensional Finite-Difference Groundwater flow Model
3. Applications
1) Study Area
2) Discretization and Boundary Conditions
3) Hydraulic Characteristics
4) Others
5) Well
4. Sensitivity Analysis
5. Calibration
6. Simulation of Design Well
7. Conclusion
References

키워드

MODFLOW 수위저하량 민감도분석 MODFLOW drawdown sensitivity analysis

저자

  • Sam Eun Kim [ 김삼은 | Ph.D. Candidate, Department of Civil Engineering, Inha University, Incheon, Korea ] Corresponding Author
  • Hung Soo Kim [ 김형수 | Professor, Department of Civil Engineering, Inha University, Incheon, Korea ]

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국습지학회 [Korean Wetlands Society]
  • 설립연도
    1999
  • 분야
    자연과학>기타자연과학
  • 소개
    습지보전에 관한 특성 및 이용현황을 파악하여 습지의 보전과 개발의 조화방안을 조사 및 연구하고 람사협약 등 국제협력에 동참하여 습지보전에 기여함

간행물

  • 간행물명
    한국습지학회지 [韓國濕地學會誌]
  • 간기
    계간
  • pISSN
    1229-6031
  • eISSN
    2384-0056
  • 수록기간
    1999~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 472 DDC 570

이 권호 내 다른 논문 / 한국습지학회지 제23권 제4호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장