Earticle

초록

영어

Domestic dust remover began to be manufactured and installed in the late 1980s by introducing Japanese products and technologies. Currently, the design standards of dust remover are applied to Japan's design standards and partly sub-unit technology was developed for the domestic environment, but no technology was not developed. In addition, most of the manufacturers are small or small, so many of them have been installed and operated for 25 years because they develop small technologies such as parts deformation and functional addition rather than core technology development. Mechanical dust remover require about 70% of manufacturing costs compared to conventional hydraulic dust remover, which can reduce initial production costs, reduce maintenance costs due to low failure rates, and can be operated reliably. Existing hydraulic dust remover had a problem of contaminating rivers due to leakage of hydraulic oil, but mechanical dust remover have no factors that cause water pollution. Therefore, this study developed a rack-type operating structure for optimal and new construction by developing a multi-stage rack structure of mechanical decontamination components, which are substitutes of conventional rotary and hydraulic dust remover.

목차

ABSTRACT
1. 서론
2. 기계식 제진기 구조계산
3. 다단계 신축 래크 구조의 붐대
3.1 Rack bar의 설계 및 해석
3.2 붐대 Assembly 및 작동 시뮬레이션
3.3 부품간 간섭 체크와 작동성 검증
4. 결론
References

키워드

저자

• 석재준 [ Jae-June Seok | Department of Carbon Covergence Engineering, Jeonju University ]
• 채형구 [ Hyung-Gu Chae | Department of Carbon Covergence Engineering, Jeonju University ]
• 강성수 [ Sung-Soo Kang | Professor, Jeonju Universiy ] Corresponding Author

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  한국기계항공기술학회지(구 한국기계기술학회지) [Journal of the Korean Society of Mechanical and Aviation Technology ]

• 간기

  격월간

• pISSN

  1229-604X

• eISSN

  2508-3805

• 수록기간

  1999~2026

• 등재여부

  KCI 등재

• 십진분류

  KDC 550 DDC 620