Earticle

초록

영어

This study developed a scenario to understand the reaction rate and operational time according to RTI value of rate of rise detector in each type in case of fire mattress. In the results of analyzing the reaction rate and operational time of detector in each scenario, in case when installing a single detector, the elevated temperature per minute was raised to 8℃/min ~ 9℃/min. In case when installing two detectors, it was raised to 9℃/min ~ 10℃/min. In case when installing three detectors, it was raised to 10℃/min. The horizontal distance between detector and mattress was 1.8m~2.5m. Whenever the number of detectors was increased, the horizontal distance was decreased. The operational time of detector was within maximum 540 seconds and minimum 420 seconds. As the research tasks in the future, there should be the researches on the effects of reaction rate of detector on the evacuation in case of fire through the result value of RSET by setting up the latency until the detector operates, and the researches on the safety by understanding if the operational time of detector is suitable for the evaluation standard of performancecentered design.

목차

Abstract
1. 서론
2. 화재시뮬레이션
2.1 건축물 구조 및 실험모델의 설정
2.2 감지기의 설치개수 산정 및 설치 위치
2.3 시나리오 구성
2.4 화재 시뮬레이션 프로그램 입력 값
3. 결과 및 고찰
3.1 시나리오 1
3.2 시나리오 2
3.3 시나리오 3
3.4 시나리오 4
4. 결론 및 제언
5. References

키워드

저자

• 김서영 [ Seo-Young Kim | 우석대학교 소방방재학과 석사과정 ]
• 공하성 [ Ha-Sung Kong | 우석대학교 소방방재학과 교수 ] Corresponding Author

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  대한안전경영과학회지 [Journal of Korea Safety Management & Science]

• 간기

  계간

• pISSN

  1229-6783

• eISSN

  2288-1484

• 수록기간

  1999~2025

• 십진분류

  KDC 530 DDC 620