Earticle

현재 위치 Home

디바이스와 모듈

정현파 Hall Sensor 신호의 잡음제거를 위한 회로설계
Circuit Design for Noise Removal of Sine Wave Hall Sensor Signal

첫 페이지 보기
  • 발행기관
    국제인공지능학회(구 한국인터넷방송통신학회) 바로가기
  • 간행물
    한국인터넷방송통신학회 논문지 KCI 등재 바로가기
  • 통권
    제21권 제4호 (2021.08)바로가기
  • 페이지
    pp.135-141
  • 저자
    정성인
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A399264

※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.

원문정보

초록

영어
Interest is growing in the design and development of square wave driven BLDC permanent magnet motors suitable for industrial automation, and the development of position detection circuits and drivers. However, this motor is somewhat limited in its application despite the price and functional advantages due to the decrease in efficiency due to switching loss and vibration and noise. In the process of designing and assembling a BLDC motor, the magnetic pole angle is not uniform or the magnetic flux distribution is distorted due to problems in magnetic circuit design or product non-uniformity in the assembly process. Therefore, these things cause position detection deviation and deteriorate the motor characteristics. In addition, the sine wave driven BLDC system can operate stably only when the signal generated from the position sensor is accurately fed back to the driver. However, since the generated signal cannot perform stable position detection due to the occurrence of DC offset component due to magnetic flux density deviation or magnetization technology, which is an external influence, this study intends to study the proposed circuit that can remove the DC offset component.
한국어
산업자동화에 적합한 구형파 구동 BLDC 영구자석 전동기 설계 및 개발, 위치검출방식 회로와 드라이버 개발에 관심이 증가하고 있다. 그러나 이 전동기는 스위칭 손실에 의한 효율 저하 및 진동, 소음 등으로 인하여 가격적∙기능적인 장점에도 불구하고 그 응용에 있어서는 다소 제한적인 실정이다. BLDC 모터를 설계하고 조립하는 과정에 있어 자기회 로 설계의 문제 또는 조립과정상의 제품 불 균일 등으로 인하여 자극 각이 균일하지 않거나 자속분포가 왜현되는 문제가 발생하는데, 이러한 것들이 위치검출 어긋남의 원인이 되어 모터 특성을 악화시킨다. 또한 위치센서로부터 발생된 신호 가 정확히 드라이버로 피드백 되어야만 정현파 구동 BLDC 시스템이 안정적으로 동작할 수 있다. 그러나 발생된 신호가 외부의 영향인 자속밀도 편차나 착자 기술에 의해 DC offset 성분이 발생하여 안정적인 위치검출을 할 수 없기에 본 연구에서는 DC offset 성분을 제거할 수 있는 제안된 회로를 연구하고자 한다.

목차

요약
Abstract
Ⅰ. 서론
II. 정현파 구동방식과 신호보상
III. 정현파구현 및 DC offset 제거를 위한 모델링 설계 및 실험결과
V. 결론
References

키워드

BLDC Sine Wave Hall Sensor Signal Flux Density Deviation DC Offset Component

저자

  • 정성인 [ Sungin Jeong | 정회원, 광주대학교 미래자동차공학과 ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    국제인공지능학회(구 한국인터넷방송통신학회) [The International Association for Artificial Intelligence]
  • 설립연도
    2000
  • 분야
    공학>전자/정보통신공학
  • 소개
    인터넷방송, 인터넷 TV , 방송 통신 네트워크 및 관련 분야에 대한 국내는 물론 국제적인 학술, 기술의 진흥발전에 공헌하고 지식 정보화 사회에 기여하고자 한다.

간행물

  • 간행물명
    한국인터넷방송통신학회 논문지 [The Journal of the Institute of Internet, Broadcasting and Communication]
  • 간기
    격월간
  • pISSN
    2289-0238
  • eISSN
    2289-0246
  • 수록기간
    2001~2025
  • 십진분류
    KDC 326 DDC 380

이 권호 내 다른 논문 / 한국인터넷방송통신학회 논문지 제21권 제4호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장