Earticle

현재 위치 Home

Research Article

나주 오량동 요지 출토 토기의 기종별 재료 특성과 제작기법 연구
Material Characteristics and Making Techniques of Pottery by Type from the Oryang-dong Kiln Site in Naju, Korea

첫 페이지 보기
  • 발행기관
    한국문화유산보존과학회(구 한국문화재보존과학회) 바로가기
  • 간행물
    보존과학회지 KCI 등재 바로가기
  • 통권
    제36권 제6호 (2020.12)바로가기
  • 페이지
    pp.440-455
  • 저자
    진홍주, 장성윤, 김수경, 이명성
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A387218

※ 기관로그인 시 무료 이용이 가능합니다.

4,900원

원문정보

초록

영어
This study aims to examine the material characteristics of bowls and compare the making techniques of flat cup with cover and jar coffin from the Oryang-dong kiln site, Naju. Bowls, the most frequently excavated small pottery have similar material characteristics, including gray surface, fine-grained texture, and small-sized tempers such as quartz and feldspar, regardless of the excavation slopes. However, the firing temperature of the bowls mostly ranges from 950 to 1,100 °C. It is estimated that the bowls had formalized making techniques, owing to the similar material composition and firing technique regardless of the excavation slope. The flat cups with cover have similar texture and mineral phases, except their poorly sorted inclusions. However, the jar coffins contain not only fine-grained minerals but also medium-grained quartz, feldspar, and biotite, showing a relatively wide range of firing temperatures. According to the geochemical results of pottery by type, it is assumed that chemical compositions are classified into two groups: small pottery(bowl and falt cup with cover) and jar coffins. In conclusion, small potteries such as bowls and flat cups with cover were made by removing the heavy minerals from raw materials, whereas jar coffins were made by adding medium-grained minerals to raw materials to maintain and support their structures, despite the same source materials. In addition, it is presumed that pottery making proceeded by selecting the source materials, preparing according to their use and controlling the firing temperature and environment.
한국어
이 연구는 나주 오량동 요지 가마유구에서 출토된 완형토기(碗, bowl)의 원료 특성을 출토 사면별로 분석하고 개배(蓋杯, flat cup with cover), 옹관(甕棺, jar coffin)과 비교하여 기종별 제작기법을 검토하였다. 소형토기 중 가장 많이 출토되는 완형토기는 출토 사면과 관계없이 미정질 내지 은미정질 기질에 세립질 석영과 장석이 비짐으로 사용되어 상당히 유사한 원료특 성을 보이며, 대체로 950∼1,100℃의 소성온도를 나타냈다. 완형토기는 출토 사면과 관계없이 태토조성과 소성기법이 유사하여 정형화된 제작기법을 보유하고 있었던 것으로 생각된다. 개배 는 세립질 광물을 비짐으로 첨가한 것이 완형토기와 유사하나 광물의 입자가 크고 함량이 높게 나타난다. 그러나 대형옹관은 세립질 뿐만 아니라 중립질 석영, 장석, 흑운모를 포함하고 있다. 기종별 태토 특성은 태토의 화학조성을 상관도에 도시한 결과에서도 확인되는데, 소형 완형토 기와 개배는 옹관과 분포영역이 구분된다. 따라서 나주 오량동 요지는 동일한 원료수급 환경 내에서도 완형토기, 개배와 같은 소형토기는 태토를 정제하였고, 옹관은 기벽 유지를 위해 중립 질 광물을 첨가하였다. 또한 사용목적에 적합하도록 태토를 선별하여 준비하고 소성온도와 소 성환경을 조절하여 제작한 것으로 확인된다.

목차

초록
ABSTRACT
1. 서론
2. 연구 대상 및 방법
2.1. 연구대상
2.2. 연구방법
3. 분석결과
3.1. 물리적 특성
3.2. 광물학적 특성
3.3. 지구화학적 특성
4. 고찰
4.1. 완형토기의 태토 특성
4.2. 기종별 제작기법
4.3. 소성온도 및 소성환경
5. 결론
사사
REFERENCES

키워드

오량동 요지 완형토기 개배 옹관 제작기법 Oryang-dong kiln site Bowl Flat cup with cover Jar coffin Making technique

저자

  • 진홍주 [ Hong Ju Jin | 국립문화재연구소 보존과학연구실 ]
  • 장성윤 [ Sungyoon Jang | 국립문화재연구소 문화재보존과학센터 ]
  • 김수경 [ Su Kyoung Kim | 국립문화재연구소 보존과학연구실 ]
  • 이명성 [ Myeong Seong Lee | 국립문화재연구소 보존과학연구실 ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국문화유산보존과학회(구 한국문화재보존과학회) [The Korea Society of Conservation Science for Cultural Heritage]
  • 설립연도
    2003
  • 분야
    자연과학>자연과학일반
  • 소개
    본 법인은 문화재 과학적 보존에 관한 제반 학술적 연구 발전 보급을 위하여 문화재 보존기술 개발과 수리 및 복원에 관한 방법을 연구함으로서 문화재의 보존 및 계승에 기여함을 그 목적으로 한다.

간행물

  • 간행물명
    보존과학회지 [Journal of Conservation Science]
  • 간기
    연5회
  • pISSN
    1225-5459
  • eISSN
    2287-9781
  • 수록기간
    2003~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 602 DDC 700

이 권호 내 다른 논문 / 보존과학회지 제36권 제6호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장