Earticle

초록

영어

This paper studied a method of estimating target information using a radar in wireless communication. Position information on the target can be estimated angle, distance and velocity. The velocity information can be estimated since the Doppler frequency is changed in the moving target. The signal incident on the receiving array antenna is multiplied by the delay time and the reference signal to represent the output signal. This output signal is estimated by applying FFT (Fast Fourier Transform) after calculating signal correlation through correlation integrator. Since the output signal must be calculated within the correlator, it should be processed with the Dwell time. The correlation signal of the correlation integrator outside this Dwell time is indicated by the velocity measurement error. The FFT is applied to the signal that has passed through the correlated integrator in order to estimate the distance of the signal. The Doppler resolution must be improved because the FFT estimates target information using the Doppler information. The Doppler resolution decreases with increasing the integration time. The velocity information estimation should have no spread of the velocity. As a result of the simulation, there was no spread of the target velocity in this study.

목차

Abstract
1. Introduction
2. Analysis of the receive signal
2.1 Distance information estimation
2.2 Velocity information estimation
3. The velocity algorithm proposal
4. Simulation
5. Conclusion
References

키워드

저자

• Kwan Hyeong Lee [ Associate Professor, Division of Human IT Convergence, Daejin University, Korea ] Corresponding Author

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  International Journal of Internet, Broadcasting and Communication

• 간기

  계간

• pISSN

  2288-4920

• eISSN

  2288-4939

• 수록기간

  2009~2025

• 십진분류

  KDC 326 DDC 380