Earticle

초록

영어

Cryogenic insulation systems, with proper materials selection and execution, can offer the highest levels of thermal performance. Insulations are listed in order of increasing performance and, generally, in order of increasing cost. The specific insulation to be used for a particular application is determined through a compromise between cost, ease of application and the effectiveness of the insulation. Consequently, materials, representative test conditions, and engineering approach for the particular application are crucial to achieve the optimum result. The present work is based on energy cost balance for optimizing the thickness of insulated chambers, using foamed or multi layered cryogenic shell. The considered insulation is a uniformly applied outer layer whose thickness varies with the initial and boundary conditions of the studied vessel under steady-state radial heat transfer. An expression of the optimal insulation thickness derived from the total cost function and depending on the geometrical parameters of the container is presented.

목차

Abstract
1. INTRODUCTION
2. DETERMINATION OF OPTIMAL THICKNESS
3. RESULTS AND INTERPRETATION
4. FINAL CONCLUSIONS
REFERENCES

키워드

저자

• Hocine MZAD [ Department of Mechanical Engineering, Badji Mokhtar University of Annaba, P.O. Box 12, DZ−23000, Algeria ] Corresponding Author
• Abdallah HAOUAM [ Department of Mechanical Engineering, Badji Mokhtar University of Annaba, P.O. Box 12, DZ−23000, Algeria ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  한국초전도·저온논문지 (구 한국초전도저온공학회논문지) [Progress in Superconductivity and Cryogenics]

• 간기

  계간

• pISSN

  1229-3008

• eISSN

  2287-6251

• 수록기간

  1999~2026

• 등재여부

  KCI 등재,SCOPUS

• 십진분류

  KDC 427 DDC 537