Earticle

현재 위치 Home

고전압 착자기에서의 누전 사고 방지를 위한 광통신 제어시스템의 도입 방안과 경제성 분석
Economic Analysis of Optical Communication Control System in High Voltage Magnetizer

첫 페이지 보기
  • 발행기관
    한국정보기술응용학회 바로가기
  • 간행물
    JITAM 바로가기
  • 통권
    Vol.26 No.6 (2019.12)바로가기
  • 페이지
    pp.103-117
  • 저자
    배영우, 김우주, 홍준석
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A372195

※ 기관로그인 시 무료 이용이 가능합니다.

4,800원

원문정보

초록

영어
Demand for high power motors is rapidly increasing as the 4th industry and convergence technology has recently emerged. In order to produce high-strength permanent magnets, the magnets used for magnetization have been increased from DC 300V in the 1970s to DC 2.5kV in the 2010s, Up to DC 10kV in the 2030s, It is expected that higher voltage will be used to magnetize. However, in the case of a magnetizer using an existing electric signal control device, it is necessary to use a control device with a high-voltage insulation function in case a high voltage used for magnetization is leaked to the control device. If a short circuit accident occurs, the controller must be shut down and serious problems such as excessive repair costs arise. In this study, a control system adopting optical communication method instead of electric signal control method is proposed to prevent leakage currents in high-voltage magnetizer. We design a transmitter(Tx) and a receiver(Rx) device for the optical communication control device and implemented a prototype connecting the optical cable. In order to demonstrate the utility of high-voltage magnetizer using the optical communication control device, we analyzed the initial cost and the yearly cost for the years to analyze the net present value. As a result, In the case of the low-voltage magnetizer, the electric signal control method cost less, As the operating voltage of the magnetizer becomes higher. It is confirmed that it takes less cost when the optical communication control device is used.

목차

Abstract
1. 서론
2. 관련 연구
3. 착자기의 구조와 제어시스템의 발전
3.1 연대별 변화
3.2 영구자석
3.3 착자기의 구성
3.4 년대별 착자기 회로분석
4. 광통신 제어시스템의 도입 방안
4.1 광통신 제어시스템을 적용한 착자기의 구조
4.2 광모듈과 케이블
4.3 프로토타입의 설계 및 구현
4.4 프로토타입의 검증
5. 광통신 제어시스템의 경제성 분석
5.1 초기 비용의 추정
5.2 연도별 수리비용의 추정
5.3 순현가(NPV) 분석
6. 결론
References

키워드

Magnetizer Optical Communication Control NPV Analysis

저자

  • 배영우 [ Young Woo Bae | CEO, Korea Industrial Electronics Co., Ltd. ] First Author
  • 김우주 [ Wooju Kim | Professor, Department of Industrial Engineering, Yonsei University ] Corresponding Author
  • 홍준석 [ June Seok Hong | Professor, Department of Management Information Systems, Kyonggi University ]

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국정보기술응용학회 [The Korea Society of Information Technology Applications]
  • 설립연도
    1999
  • 분야
    사회과학>경영학
  • 소개
    본 학회는 정보기술 관련 분야의 연구 및 교류를 촉진하여 국가 및 기업정보화 발전에 공헌함을 그 목적으로 한다.

간행물

  • 간행물명
    JITAM [Journal of Information Technology Applications and Management]
  • 간기
    격월간
  • pISSN
    1598-6284
  • eISSN
    2508-1209
  • 수록기간
    1999~2026
  • 십진분류
    KDC 005 DDC 005

이 권호 내 다른 논문 / JITAM Vol.26 No.6

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장