Earticle

초록

영어

This paper deals with the dynamic control of redundant robot manipulator. Traditionally, the kinematic control schemes for redundant robot manipulator were developed from the point of speed and used under the assumption that the dynamic control of manipulator is perfect. However, in reality, the precise control of redundant robot manipulator is very difficult due to their dynamics. Therefore, the kinematic controllers for redundant robot manipulator were employed in the acceleration dimension and may be combined with the computed torque method to achieve the accurate control performance. But their control performance is limited by the accuracy of the manipulator parameters such as the link mass, length, moment of inertia and varying payload. Hence in this paper, the proportional and derivative control gains of the computed torque controller are optimized by the genetic algorithm on the typical payloads, and the neural network is applied to obtain the proper control gains for arbitrary loads. The simulation results show that the proposed control method has better performance than the conventional control method for redundant robot manipulator.

목차

ABSTRACT
1. 서론
2. 여유자유도 로봇 매니퓰레이터
3. 개선된 계산토크제어기
4. 유전알고리즘의 적용
5. 신경회로망에 의한 제어이득 보간
6. 모의실험
7. 결론
후기
References

키워드

저자

• 최영규 [ Young-Kiu Choi | Professor, Dept. of Electrical Engineering, Pusan National University ]
• 박진현 [ Jin-Hyun Park | Professor, Dept. of Mechatronics Eng, Gyeongnam National University of Science and Technology ] Corresponding author

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  한국기계항공기술학회지(구 한국기계기술학회지) [Journal of the Korean Society of Mechanical and Aviation Technology ]

• 간기

  격월간

• pISSN

  1229-604X

• eISSN

  2508-3805

• 수록기간

  1999~2026

• 등재여부

  KCI 등재

• 십진분류

  KDC 550 DDC 620