Earticle

현재 위치 Home

차량 창문 개폐에 따른 내부에서의 유동 해석으로의 융합적 고찰
Convergent Investigation with Internal Flow Analysis According to the Opening and Closing of Vehicle Window

첫 페이지 보기
  • 발행기관
    한국융합학회 바로가기
  • 간행물
    한국융합학회논문지 KCI 등재 바로가기
  • 통권
    제11권 제2호 (2020.02)바로가기
  • 페이지
    pp.155-160
  • 저자
    오범석, 조재웅
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A369941

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
In this study, the pleasant driving environment of the driver and passenger in the summer was investigated through the internal flow analysis of air due to the opening and closing of the car windows. The conditions on the entrance of the air conditioner with the opening and closing status of vehicle window were applied to the flow analysis by taking into consideration the actual driving environment. The automotive air conditioning outlet, the seat and the inside of car were modeled. As the air flow inside the car was analyzed, the air flow configuration and the temperature distribution were examined. In this analysis, the results were taken in consideration of only the effects of internal air and the opening and closing of window, assuming the interior of the vehicle as insulation. The analysis of each condition shows that these models maintain a pleasant environment. It is seen that this analysis result on the internal flow analysis according to the opening and closing of vehicle window can be applied by converging with the field of design.
한국어
본 연구에서는 자동차 창문의 개폐에 따라 공기의 내부 유동 해석을 통하여 여름철에 운전자와 동승자의 쾌적한 운전환경을 고찰하였다. 실제 운전 환경을 고려하여, 자동차 창문 개폐 상태로서의 에어컨 입구 조건들을 유동 해석에 적용하였다. 자동차 에어컨 토출구, 시트 그리고 실내를 모델링하였고, 차 내부에서의 공기유동을 해석하여 공기의 유동 형상과 내부의 온도분포를 확인하였다. 본 해석에서는 공기 유입부와 배출구를 정하고 자동차 내부를 단열상태로 가정 하고 내부공기와 창문 개폐의 영향만을 고려해서 결과를 보았다. 각 조건들의 해석을 고찰해보면 본 연구 모델들이 쾌적 한 환경이 유지됨을 알 수 있었다. 차량 창문 개폐에 따른 내부에서의 유동에 대한 본 해석 결과는 디자인 분야에 융합 하여 적용될 수 있다고 보인다.

목차

요약
Abstract
1. 서론
2. 연구 모델
3. 해석결과
4. 결론
REFERENCES

키워드

창문 개폐 공기저항 유동해석 유속 융합 Window Opening and closing Air resistance Flow analysis Flow rate Convergence

저자

  • 오범석 [ Bum-Suk Oh | 공주대학교 기계자동차공학부 교수 ]
  • 조재웅 [ Jae-Ung Cho | 공주대학교 기계자동차공학부 교수 ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국융합학회 [Korea Convergence Society]
  • 설립연도
    2011
  • 분야
    복합학>학제간연구
  • 소개
    본회는 융합학문 및 융합기술을 교류를 통한 학문기술의 확대․발전․보급 및 기술개발 전략에 과학적으로 접근하여 융합학문 및 기술을 더욱 활성화하고, 회원 상호간의 정보 교류를 도모함으로써 지역과 나라발전에 기여함을 목적으로 한다.

간행물

  • 간행물명
    한국융합학회논문지 [Journal of the Korea Convergence Society]
  • 간기
    월간
  • pISSN
    2233-4890
  • 수록기간
    2010~2022
  • 십진분류
    KDC 530 DDC 620

이 권호 내 다른 논문 / 한국융합학회논문지 제11권 제2호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장