Earticle

초록

영어

Recently, a Korean company succeeded in manufacturing ∅1500mm, t90 PP double wall pipe with ring stiffness ‘SN26’ for the first time in Korea. For commercialization, the developed productt must be cut to the required length with cutting machine in the continuous manufacturing process. The cutting operation was attempted with the cutting device(∅18″, 120P Wheelcutter for Aluminum, 2100rpm) used for the conventional PE or PVC pipe(∅1200mm, t70). In order to commercialize the developed product, product must be cut to the required length with cutting machine in the continuous manufacturing process. but the cutting operation was failed. The results of observation after processing, The material of the large diameter PP pipe was fused on the surface of the wheel cutter and the wheel cutter was detached. The purpose of this study is to research the effect of wheel cutter structure and rotational speed on cutting work when cutting large diameter PP pipes.

목차

ABSTRACT
1. 서론
1.1 국내·외 연구동향
2. 실험 및 방법
2.1 실험장치
2.2 실험 방법
3. 실험결과 및 고찰
3.1 시편 절단면과 칩 형태 촬영 결과
3.2 시편측면과 휠커터 온도 및 절단소요시간
4. 결론
후기

키워드

저자

• 엄용균 [ Yong-Kyoon Eom | Professor, Andong National University ] Corresponding author
• 권건영 [ Geon-Yeong Gwon | Student, Mech., Eng., Andong National University ]
• 허원권 [ Won-Keon Huh | C.E.O, Perfact co., Ltd ]

참고문헌

발행기관

간행물

표지보기 관심저널 등록

• 간행물명

  한국기계항공기술학회지(구 한국기계기술학회지) [Journal of the Korean Society of Mechanical and Aviation Technology ]

• 간기

  격월간

• pISSN

  1229-604X

• eISSN

  2508-3805

• 수록기간

  1999~2026

• 등재여부

  KCI 등재

• 십진분류

  KDC 550 DDC 620