Earticle

현재 위치 Home

Research Article

목공예용 천연 및 합성 접착제의 특성 연구
Study on the Physical Properties and Characteristics of Adhesives for Woodcraft

첫 페이지 보기
  • 발행기관
    한국문화유산보존과학회(구 한국문화재보존과학회) 바로가기
  • 간행물
    보존과학회지 KCI 등재 바로가기
  • 통권
    제35권 제6호 (2019.12)바로가기
  • 페이지
    pp.681-688
  • 저자
    김성은, 이진경, 이채훈, 정용재
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A367321

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
In this study, the characteristics of natural and synthetic adhesives used in woodcraft were evaluated. The pattern of deterioration of wood and adhesives according to changes in temperature and humidity were compared. For materials, one type of anlmal glue, three kinds of polyvinyl acetate adhesives, one type of epoxy adhesive and one type of zelkova wood were selected. Characteristics of physical and chemical characteristics, weather resistance and drying speed assessment were carried out. The adhesion characteristic evaluation showed that the adhesion strength of anlmal glue and one type of polyvinyl acetate adhesive were 6.54 N/mm2 and 7.01 N/mm2, pH meter of anlmal glue and polyvinyl acetate adhesives was pH 7.03 and pH 3.32-3.59 which were range of available as an adhesive. According to the test results of weather resistance, epoxy adhesives had the highest decreasing value in adhesion strength after deterioration. In the reversible test of the adhesive, it was found to be highly reversible in NaOH, a soluble solvent excluding epoxy, but attention is required when using the wood since it may show discoloration during processing.
한국어
본 연구에서는 목공예품에 사용되는 천연 및 합성 접착제의 특성을 평가하고, 온습도 변화에 따른 접착제와 목재의 열화 양상을 비교하였다. 아교 1종, 폴리초산비닐계 접착제 3종, 에폭시계 접착제 1종와 느티나무 목재를 선정하여 물리적, 화학적 특성평가와 내후성, 건조속도 평가를 진행하였다. 접착제 특성평가를 통해 아교와 폴리초산비닐계 1종의 접착강도가 각각 6.54 N/mm²과 7.01 N/mm²으로 나타났으며, 아교는 pH 7.03, 폴리초산비닐계 접착제는 pH 3.32∼ 3.59으로 접착제로써 사용가능한 범위인 것으로 확인되었다. 내후성 실험결과 에폭시계 접착제 는 열화 후 접착강도 감소폭이 가장 높았다. 접착제에 대한 가역성 실험을 통해 에폭시를 제외하 고 수용성용매인 NaOH에서 가역성이 높은 것으로 나왔으나 처리 시 목재에 변색이 나타날 수 있으므로 사용 시 주의가 필요하다.

목차

초록
ABSTRACT
1. 서론
2. 재료 및 방법
2.1. 연구재료
2.2. 접착제 특성 평가
2.3. 내후성평가
2.4. 건조시간 평가
3. 연구 결과
3.1. 접착제 특성 평가
3.2. 내후성 평가
3.3. 건조시간 평가
4. 고찰 및 결론
REFERENCES

키워드

목공예 아교 합성접착제 목재 열화안정성 가역성 Woodcraft Animal glue Synthetic adhesive Wood Deterioration stability Reversibility

저자

  • 김성은 [ Seong Eun Kim | 한국전통문화대학교 문화유산전문대학원 문화재수리기술학과 ]
  • 이진경 [ Jin Kyung Lee | 한국전통문화대학교 문화재보존과학과 ]
  • 이채훈 [ Chae Hoon Lee | 한국전통문화대학교 문화유산전문대학원 문화재수리기술학과 ]
  • 정용재 [ Yong Jae Chung | 한국전통문화대학교 문화유산전문대학원 문화재수리기술학과 ] Corresponding author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국문화유산보존과학회(구 한국문화재보존과학회) [The Korea Society of Conservation Science for Cultural Heritage]
  • 설립연도
    2003
  • 분야
    자연과학>자연과학일반
  • 소개
    본 법인은 문화재 과학적 보존에 관한 제반 학술적 연구 발전 보급을 위하여 문화재 보존기술 개발과 수리 및 복원에 관한 방법을 연구함으로서 문화재의 보존 및 계승에 기여함을 그 목적으로 한다.

간행물

  • 간행물명
    보존과학회지 [Journal of Conservation Science]
  • 간기
    연5회
  • pISSN
    1225-5459
  • eISSN
    2287-9781
  • 수록기간
    2003~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 602 DDC 700

이 권호 내 다른 논문 / 보존과학회지 제35권 제6호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장