Earticle

현재 위치 Home

Research Article

전통 안료 제법 규명을 위한 연표법 연구
A Study on the Yeonpyo-beob for the Explanation of the Manufacturing Method of Traditional Pigments

첫 페이지 보기
  • 발행기관
    한국문화유산보존과학회(구 한국문화재보존과학회) 바로가기
  • 간행물
    보존과학회지 KCI 등재 바로가기
  • 통권
    제35권 제6호 (2019.12)바로가기
  • 페이지
    pp.664-669
  • 저자
    강영석, 정혜영
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A367319

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
Yeonpyo-beob is a method of manufacturing pigments using bamboo trunk and glue solution. Glue solutions of concentrations 1, 5, and 10% were employed to manufacture pigments, and the characteristics of pigment manufacturing were analyzed according to these concentrations. The pigment manufacturing process can be divided into holding and drying phases. The holding phase involves the sedimentation of relatively large particles, whereas the drying phase involves the sedimentation of small particles. The layers formed during the drying phase have almost similar forms regardless of the concentration of the glue solution. If the concentration of the glue solution is low in the holding phase, the particles are mixed and the formation of a layer is difficult. In contrast, when the concentration of the glue solution is higher, the layer of the pigment is more distinct. These results confirmed that the differences in viscosity due to the variation in the concentration of the glue solution affect the sedimentation velocity of the pigment particles, thereby affecting the formation of the layer of the pigment and the pigment manufacture. Consequently, applying 10% glue solution to reduce the sediment velocity is deemed suitable for the stratification of the pigment particles and the manufacture of pigments.
한국어
연표법은 대나무통과 아교수를 이용해 안료를 제조하는 방법이다. 연표법에 따른 안료의 제조과정을 과학적으로 규명하기 위해 1%, 5%, 10%의 아교수를 적용하여 안료를 제조하고, 아교수의 농도에 따른 안료제조 특성을 분석하였다. 안료제조 과정은 크게 정치단계와 건조단 계로 나눌 수 있는데, 정치단계에서 비교적 큰 입자들의 침전이 이루어지고, 건조단계에서는 작은 입자들의 침전이 이루어진다. 건조단계에서 형성되는 층위의 경우 아교수의 농도에 상관 없이 거의 유사한 형태를 보이지만, 정치단계에서 형성되는 안료 층위의 경우는 아교수의 농도 가 낮은 경우에는 입자들이 혼재되고 층위형성이 어려운 반면 아교수 농도가 높아질수록 안료 의 입도별 층위형성이 뚜렷하게 나타났다. 이와 같은 결과를 통해 아교수의 농도에 따른 점성도 의 차이가 안료 입자의 침강속도에 영향을 미치며, 이로 인해 안료 층위의 형성 및 안료 제조에 도 영향을 미친다는 것을 확인하였다. 결과적으로 고농도인 10% 아교수를 적용하여 입자의 침 강속도를 감소시키는 것이 안료 층위의 형성 및 안료제조에 보다 적합한 것으로 판단된다.

목차

초록
ABSTRACT
1. 서론
2. 연구재료 및 방법
2.1. 연구재료
2.2. 연구방법
3. 연구결과 및 고찰
3.1. 아교수 농도에 따른 안료의 제조 특성
3.2. 아교수의 영향
4. 결론
REFERENCES

키워드

안료제법 아교수 점성도 침강속도 Manufacturing method of pigments Glue solution Viscosity Sedimentation velocity

저자

  • 강영석 [ Yeong Seok Kang | 국립문화재연구소 복원기술연구실 ]
  • 정혜영 [ Hye Young Jeong | 국립문화재연구소 복원기술연구실 ] Corresponding author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국문화유산보존과학회(구 한국문화재보존과학회) [The Korea Society of Conservation Science for Cultural Heritage]
  • 설립연도
    2003
  • 분야
    자연과학>자연과학일반
  • 소개
    본 법인은 문화재 과학적 보존에 관한 제반 학술적 연구 발전 보급을 위하여 문화재 보존기술 개발과 수리 및 복원에 관한 방법을 연구함으로서 문화재의 보존 및 계승에 기여함을 그 목적으로 한다.

간행물

  • 간행물명
    보존과학회지 [Journal of Conservation Science]
  • 간기
    연5회
  • pISSN
    1225-5459
  • eISSN
    2287-9781
  • 수록기간
    2003~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 602 DDC 700

이 권호 내 다른 논문 / 보존과학회지 제35권 제6호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장