Earticle

현재 위치 Home

Research Article

고주석 청동정문경(靑銅精文鏡)의 재현실험을 통한 합금재료의 특성 연구
A Study on Characteristics of Alloy Materials through Reproduction Experiment of High-tin Bronze Mirror with Geometric Designs

첫 페이지 보기
  • 발행기관
    한국문화유산보존과학회(구 한국문화재보존과학회) 바로가기
  • 간행물
    보존과학회지 KCI 등재 바로가기
  • 통권
    제35권 제5호 (2019.10)바로가기
  • 페이지
    pp.508-517
  • 저자
    이인경, 조영훈, 조남철
  • 언어
    한국어(KOR)
  • URL
    https://www.earticle.net/Article/A364192

※ 기관로그인 시 무료 이용이 가능합니다.

4,000원

원문정보

초록

영어
This study analyzed on alloys and by-product samples produced through the reproduction experiment of bronze mirror with geometric designs. The alloy ratio used in the first and second reproduction experiments was based on the analysis results of bronze mirror with geometric designs(Cu 61.68%, Sn 32.25%, Pb 5.46%) which is the national treasure No. 141. As a result of portable X-ray fluorescence analysis on the raw materials used in the reproduction experiment, the contents of copper raw materials were 98.85 wt% for Cu, tin raw materials were 99.03 wt% for Sn, and lead raw materials were 70.19 wt% for Pb, and 21.81 wt% for Sn. Sn and Pb were added 5 wt% more considering the evaporation amount of tin and lead during alloy melting. The result produced by the first reproduction experiment were 58.75 wt% for Cu, 36.87 wt% for Sn, 4.39 wt% for Pb, and the other result produced by the second reproduction experiment were 58.66 wt% for Cu, 35.89 wt% for Sn, and 5.50 wt% for Pb. The composition of the components was about 3.00 wt% in Cu and Sn respectively, and the microstructure was similar to the previous studies because the δ phase was observed mainly. The results of this study will be used as basic data for the materialistic characteristics of ancient bronze mirror in the future.
한국어
본 연구는 청동 정문경 제작공정 재현과정에서 생산된 합금 및 부산물을 대상으로 자연과학적 분석을 실시하였다. 재현실험의 합금비율은 국보 제141호 정문경에 대한 분석결과(Cu 61.7%, Sn 32.3%, Pb 5.5%)를 바탕으로 하였다. 사용된 원료에 대한 X-선 형광분석 결과, 구리는 Cu 98.9 wt%, 주석은 Sn 99.0 wt%, 납은 Pb 70.2 wt%, Sn 21.8 wt%로 확인되었다. 합금 용융 시 주석과 납의 기화량을 감안하여 Sn, Pb은 5 wt%씩 더 첨가하였다. 1차 재현실험 결과는 Cu 58.8 wt%, Sn 36.9 wt%, Pb 4.4 wt%, 2차 재현실험 결과는 Cu 58.7 wt%, Sn 35.9 wt%, Pb 5.5 wt%로 확인되었다. 성분조성은 Cu와 Sn에서 약 3 wt%씩 차이를 보였으며, 미세조직은 주로 δ상이 관찰 되어 선행연구와 유사한 양상을 나타내었다. 본 연구를 통해 향후 고대 청동거울의 재료학적 특성 규명에 있어 기초자료로 활용되었으면 한다.

목차

초록
ABSTRACT
1. 서론
2. 정문경 복원 재현실험
2.1. 거푸집 제작
2.2. 청동합금 및 주조
3. 재료 및 방법
3.1. 분석대상 시료
3.2. 분석방법
4. 연구결과
4.1. 원료 분석
4.2. 미세조직 관찰 및 성분분석
5. 결론
사사
REFERENCES

키워드

초기철기시대 정문경 재현실험 미세조직 성분분석 Early iron age Bronze mirror with geometric designs Reproduction experiment Microstructure Chemical composition

저자

  • 이인경 [ In Kyeong Lee | 공주대학교 문화재보존과학과 ]
  • 조영훈 [ Young Hoon Jo | 공주대학교 문화재보존과학과 ]
  • 조남철 [ Nam Chul Cho | 공주대학교 문화재보존과학과 ] Corresponding Author

참고문헌

자료제공 : 네이버학술정보

간행물 정보

발행기관

  • 발행기관명
    한국문화유산보존과학회(구 한국문화재보존과학회) [The Korea Society of Conservation Science for Cultural Heritage]
  • 설립연도
    2003
  • 분야
    자연과학>자연과학일반
  • 소개
    본 법인은 문화재 과학적 보존에 관한 제반 학술적 연구 발전 보급을 위하여 문화재 보존기술 개발과 수리 및 복원에 관한 방법을 연구함으로서 문화재의 보존 및 계승에 기여함을 그 목적으로 한다.

간행물

  • 간행물명
    보존과학회지 [Journal of Conservation Science]
  • 간기
    연5회
  • pISSN
    1225-5459
  • eISSN
    2287-9781
  • 수록기간
    2003~2026
  • 등재여부
    KCI 등재
  • 십진분류
    KDC 602 DDC 700

이 권호 내 다른 논문 / 보존과학회지 제35권 제5호

    피인용수 : 0(자료제공 : 네이버학술정보)

    함께 이용한 논문 이 논문을 다운로드한 분들이 이용한 다른 논문입니다.

      페이지 저장